SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " SLE " 4,151 found 🔀 AI-powered Shuffle
Roma reject Premier League approaches for wing-back Wesley
Serie A side Roma saw Wesley impress in the 2025/26 campaign and the wing-back is already attracting interest from clubs in England.This isn’t new for the Brazilian, who picked up an injury two week...
Utah marks a year of battling measles, with no clear end in sight
Utah has spent the past year fighting measles outbreaks in almost every county.
Utah marks a year of battling measles, with no clear end in sight
Utah has spent the past year fighting measles outbreaks in almost every county
Utah marks a year of battling measles, with no clear end in sight
Utah has spent the past year fighting measles outbreaks in almost every county.
Utah marks a year of battling measles, with no clear end in sight
Utah has spent the past year fighting measles outbreaks in almost every county.
Measles-infected traveler may have exposed passengers at LAX and nearby hotel, health officials warn
A measles-infected traveler may have exposed passengers at LAX and a nearby Hilton hotel on June 11, marking the sixth case in LA County this year.
Measles, landfill solar and a bridge over the Sound: CT Politics news
Plus: CSCU’s investigation, rural healthcare, utility profits, brownfields funding, and Chris Murphy's loneliness legislation.
Travelers Championship 2026: Scheffler, Spieth headline final signature event field
TPC River Highlands gets ready to host the Tour's final signature event of the season. Here are the notable names in the field.
Vikings' Jordan Mason listed as fantasy football sleeper this season
Could Vikings running back Jordan Mason be a fantasy football sleeper in 2026?
2026 NBA Draft Roundtable: Who goes No. 1 overall? Experts favor AJ Dybantsa over Darryn Peterson
Our experts weigh in on the No. 1 overall pick, the Cameron Boozer or Caleb Wilson debate and which late-round sleeper has a chance to be an NBA All-Star
Checking out Indiana's revamped health price platform
Indiana recently updated its healthcare transparency website with an AI chatbot, a sleek design and companion sites to help Hoosiers
Can Better Sleep Lower Dementia Risk? What the Science Says
Poor sleep may raise your Alzheimer's risk by as much as 44%. Here's what researchers know about sleep, brain health, and what you can do tonight.
Politics Chat, June 18, 2026
A newsletter about the history behind today's politics.
Sleep and light: the science behind Qantas' bet on 20-hour flights
Qantas Airways is betting that science can make the world's longest flights feel less punishing - unveiling plans for a "wellness zone," extra legroom, specially timed meals and animated lighting on its non-stop Sydney-London services due to launch next October.
Health officials warn about possible measles exposure at LAX, airport hotel
Los Angeles County health officials are warning the public about a possible measles exposure at LAX and two other known locations. The case was confirmed in a traveler who was infectious while trav…
Traumatized: The New Politics of Public Suffering by Catherine Liu
Verso Review by Brian Tanguay Catherine Liu doesn’t write like your typical academic. This is what I noticed first about her latest book, Traumatized, a slender volume that delivers in clarity wha…
The Shifting Politics of Climate Change
A new poll suggests Republicans may be more movable on climate change than previously thought, plus more climate news.
You're probably using too many skin care products. Here are the 3 essentials
We asked half a dozen skin care experts: Which products do you really need to keep your skin healthy and attractive? Here's what they said.
The unwanted return of tetanus; why soccer makes people so happy; breast cancer in men; plus other stories with Vanderbilt Health sources
Women’s Health interviewed Kathryn Edwards, MD, Sarah H. Sell and Cornelius Vanderbilt Professor of Pediatrics, for a story about her JAMA Viewpoint article on tetanus making a comeback. Women’s Health interviewed Colin Armstrong, PhD, Assistant Professor of Clinical Psychiatry and Behavioral Sciences and Assistant Professor of Physical Medicine and Rehabilitation, for a story tied to the World Cup about why soccer makes people so happy. An NBC News story about the announcement by “X-Men” actor and former wrestler Tyler Mane that he has breast cancer quotes Ben Ho Park, MD, director of the Vanderbilt-Ingram Cancer Center. The story focuses on how a prominent man with breast cancer may help remove some stigma from a cancer that is rare in males. Prevention magazine interviewed Caitlyn Mooney, MD, Assistant Professor, Department of Orthopaedic Surgery, for a story about a BMJ study that suggests 90 to 120 minutes per week of strength training may lower the risk of death. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Women’s Health (norovirus is more common this summer); SFGate (measles in San Francisco just before the World Cup crowds); Travel + Leisure (how to avoid getting sick on a cruise); and Fox News (mosquito-borne diseases). Reporter Liz DeSantis from WKRN News 2 aired a story on the rehab unit at Monroe Carell Jr. Children’s Hospital at Vanderbilt. Kat Hedden, PT, DPT, PCS, CBIS, Acute Pediatric Physical Therapy Clinical Team Lead and Mary McLanahan, MD, Assistant Professor of Physical Medicine and Rehabilitation were interviewed, as well as the family of patient Will Terry. Reporter Nikki Hauser from WTVF News Channel 5 interviewed Graden Knapp, Gaming and Technology Specialist at Monroe Carell Jr. Children’s Hospital at Vanderbilt about his 3-D wheelchair project. Tennesseanreporter Sandy Mazza covered the announcement of the latest Leadership Nashville class, which includes Jane Freedman, MD, Deputy CEO, and Chief Health Systems Office for Vanderbilt Health; and also the announcement of the latest Leadership Tennessee cohort, which includes Jeff Upperman, MD, Surgeon in Chief at Monroe Carroll Jr Children’s Hospital at Vanderbilt.
Isles hospital told to improve training in mental health services
A watchdog made an unannounced visit to Western Isles Hospital in February.
French Twist: Trump Upends GOP Plans | WSJ Politics Newsletter for June 18
Plus, Kevin Warsh makes his debut as Fed chairman and Trump offers encouragement to Anthropic over access to its powerful AI models
Mayo Clinic Q&A: Block some time out for health screenings
DEAR MAYO CLINIC: Since I turned 40, my clinic has been sending me a slew of reminders about men's health screenings. Are they really necessary? ANSWER: Yes! Blocking out some time for these important health screenings is one of the most important things you can do for yourself. Historically, men have been hesitant to seek […]
Which WAGs Will Win the Summer of Sport?
As NBA finals celebrations kick on and the World Cup gets underway, Vogue Business breaks down the wives and girlfriends brands should be watching in the stands.
Politics Chat, June 16, 2026
A newsletter about the history behind today's politics.
US FTC sues transgender health nonprofit over youth care standards
The U.S. Federal Trade Commission and four states accused a nonprofit focused on transgender health of making misleading statements about the benefits of gender-affirming treatments for young people in a lawsuit filed on Wednesday.
Opinion | The Deck Is Stacked Against Healthy Eating
We need the will to push back against corporate interests.
What hospitals are preparing for during World Cup
Measles? A food poisoning outbreak or a need for lots of CT scans in a hurry? With the World Cup in town, hospitals and public health teams say they're prepared.
Fantasy Football Sleepers, Busts & Predictions: 2026 Philadelphia Eagles
This year promises to be a big year of transition in Philadelphia. A.J. Brown is gone, and Makai Lemon, Dontayvion Wicks and Hollywood Brown are here now. Kevin Patullo and Jeff Stoutland are gone as offensive coordinator and offensive line…
Is gambling the reason we have pro sports?
To hear author David Bockino tell it, gambling has always been a key ingredient of pro sports in the U.S.—it’s as American as apple pie. Bockino is the author of the new book Over/Under: An Unexpected History of Sports Betting. So what gave rise to this new wave of sports gambling? And what are we risking placing so many bets on games? Fact checking by Sierra Juarez. Your Next Listen — Prediction markets are threatening national security. Who’s gonna fix it? Connect with The Indicator — Sign up for The Indicator’s brand new newsletter — Buy the Planet Money book — Find our socials, YouTube and more! — For sponsor-free episodes, subscribe to NPR+
Roy Hattersley, Frontline Warrior of British Politics, Dies at 93
A Labour Party deputy who spent years in opposition, he criticized Conservatives and members of his own party, and was at the heart of major political moments.
Summer Travel Health Checklist
Planning a summer trip? Learn 7 expert tips to help stay healthy while traveling, including measles prevention, travel vaccines, food safety, and more.
Orioles Make Ryan Helsley Announcement Before Mariners Game
The Baltimore Orioles will be getting their closer back from the injured list.
This Yankees team could have a 2019-esque makeup
With a slew of injuries, the Bombers will need some help from unlikely characters.
Q&A: Term-limited Sioux Falls mayor reflects on Republican fractures, conflict with legislators
TenHaken became emotional Monday while reflecting on positive relationships with city leaders and his staff’s accomplishments.
Inside the White House’s Newest AI Clash With Anthropic | WSJ Politics Newsletter for June 16
Plus, President Trump spent his 80th birthday finalizing the Iran agreement as he watched the UFC contest
A day in the life: President of Bacardi North America, Tony Latham
Tony Latham took over as president of Bacardi North America in April 2023 and moved to Miami. He prioritizes good sleep and living a balanced life.
Class action lawsuit claims radiology vendor Nano-X Imaging misled investors
The Israel-based manufacturer allegedly made “misleading statements” regarding its business operations and prospects, attorneys charge in the complaint, filed June 12.
Arkansas ranks 43rd in child well-being as education, health scores decline, report finds
KATV ABC 7 in Little Rock, Arkansas covers news, sports, weather and the local community in the city and the surrounding area, including Hot Springs, Conway, Pine Bluff, Jacksonville, Sherwood, Stuttgart, Benton, Bauxite, East End, Scott, Pinnacle, Maumelle, Gibson, Landmark and Hensley.
Southside Virginia health officials urge precautions as measles outbreaks spread nearby
Health officials in Southside Virginia are urging residents to take precautions as measles outbreaks are reported elsewhere in the state and nearby areas.
Doctor on how social media can affect children's health, development
Dr. Scott Hadland, the Chief of Adolescent and Young Adult Medicine at Mass General for Children, said research shows real risks that social media can affect young people's sleep as well as their attention and focus in school.
Thanks For Making Me 12th Highest on Substack’s List Of “Rising” Business- and Economics-Related Newsletters
A big thank you to those of you who upgraded to paid subscriptions to read my two most recent paid memos: https://richardkatz.substack.com/publish/posts/detail/201675746?referrer=%2Fpublish%2Fposts%2Fpublished and https://richardkatz.substack.com/publish/posts/detail/201774434?referrer=%2Fpublish%2Fposts%2Fpublished As a result, total paid subs rose by 5.6% over the past seven days. And that put me at 12th on Substack’s list of “rising” newsletters in business and economics. “Rising” means those with the biggest percentage increase in revenue from subs over a short period of time. Of course, as is often the case with the issues I discuss, this is a good-news/not-so-good-news story. The good news is a rush of new subs. The caveat is that it’s easier to get a big percentage increase when the base is relatively small. I have enough paid subs to be in the initial rank of Substack’s “best seller list,” but a way to go before enough of the 12,000 subs to Japan Economy Watch are paid subs. For most hybrid newsletters—a combination of free and paid posts—2-7% of the total subs are paid. 5% is my initial goal. If you gain insight from reading this blog, please join those who’ve already upgraded; help me reach 5%—and beyond. Subscribe
Health sleuths are watching for disease threats during the World Cup
Health officials will be on high alert for germs as millions of soccer fans gather for World Cup matches
Lancaster County measles outbreak garners national attention; 4 new cases in the past week
With measles cases in Lancaster County continuing to rise and the state tracking possible public exposures at the courthouse and a local department store, the outbreak here is attracting national
Wellesley business buzz: Lockheart to open restaurant at Newton Centre train station; Painting Place readies for Father's Day
Lockheart restaurant, in Wellesley since 2022, readies to open a new location in Newton Centre at train station
Connecticut health officials report first measles case of 2026
Connecticut’s first measles case of 2026 was reported by public health officials on Monday.
Our New Study Shows That The Science Of Cannabis And Sleep Extends Beyond THC (Op-Ed)
“We found that the strongest evidence for improving sleep was associated with cannabidiol (CBD), cannabinol (CBN) and combinations of the two—but not primarily THC.” By Andrea Efre, University of South Florida College of Nursing The cannabis sleep market represents a shift away from traditional pharmaceuticals toward a natural alternative. Historically, cannabis products marketed for sleep […]
Newcastle agree £60million front-of-shirt sponsorship deal with KNOX: Why is it significant?
The South African sports drinks company have already committed to being the club's training ground and training-kit sleeve sponsor.
Bay Area resident with measles traveled through SFO, visited San Jose businesses, officials say
Health officials in the San Francisco Bay Area issued a warning about a potential measles exposure after an infected resident traveled through San Francisco International Airport and local businesses.
Health advisory issued in Buckingham amid measles outbreak
Virginia health officials have marked more than 100 cases of measles in 2026, with most of those tied to an outbreak in Buckingham County, where residents are now being warned to avoid gatherings t…
How former Dallas Cowboys player Jaylon Smith ‘cracked the code' in business
FRISCO — He opened the front door himself — the 30-year-old who has taken a sledgehammer to the trope about NFL players going broke. There’s Jaylon Smith, shuffling about as “So Amazing” by Beyoncé and Stevie Wonder resonates through his 5,000-square-foot home. His 9-year-old dog, Achilles, meanders. Follow the former Dallas Cowboys linebacker into his office, past the golden skull…
What This Iran Deal Might Mean for American Consumers | WSJ Politics Newsletter for June 15
Plus, Kevin Warsh wants the Fed to say less, and AI deepfakes muddle the midterms
How morals influence food, health decisions
Olin’s Sydney Scott researches why consumers act the way they do in the grocery aisle – and the doctor’s office.
Sleep deprivation linked to mental health problems in adolescents
Insufficient sleep, particularly among adolescents, has been identified as a public health epidemic. WEMU’s Caroline MacGregor reports.
Who slept the worst last night: George Russell
18 points made up and still the big loser - Why George Russell is slowly running out of explanations and what additional problem he now has
Santa Clara Resident Infected With Measles Traveled Through SFO, Health Officials Say
The possible exposure comes as thousands of soccer fans descend on the county for the World Cup tournament.
Roy Hattersley: Labour politician who helped start the party's modernisation
Able Labour politician, often at odds with his party, who became a successful author and columnist.
Roy Hattersley, former Labour deputy leader, dies aged 93
Sir Keir Starmer said Lord Hattersley "was a giant of the Labour movement".
Health officials warn of possible measles exposure at SFO, San Jose locations
Santa Clara County health officials are urging the public to monitor for symptoms after a resident diagnosed with measles traveled through SFO and visited two San Jose businesses while contagious.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
14 Healthy Father’s Day Gifts Dad Will Actually Use
Looking for healthy Father’s Day gifts? From walking shoes to sleep-friendly gadgets, these 14 ideas can help support your dad’s health.
Victor Wembanyama Accused Of 'Classless' Reaction To NBA Finals Loss
Victor Wembanyama and the San Antonio Spurs fell in five on Saturday night. San Antonio blew a double-digit lead to New York, as the Knicks topped the Spurs, 4-1, in the 2026 NBA Finals. Jalen Brunson, Josh Hart, OG Anunoboy, Karl-Anthony Towns and the rest of the Knicks are NBA champions. ...
Pols & Politics: Howie Carr offers GOP gubernatorial candidates on-air debate
Longtime Boston Herald columnist and talk radio host Howie Carr is offering Brian Shortsleeve and Mike Minogue the opportunity to join a live, on-air debate on his radio show.
Health officials warn of possible measles exposure at SFO, San Jose locations
Santa Clara County health officials are urging the public to monitor for symptoms after a resident diagnosed with measles traveled through SFO and visited two San Jose businesses while infectious.
Santa Clara Co. resident infected with measles traveled to several Bay Area locations: officials
Health officials in Santa Clara County are warning about a person with measles who visited several locations in the Bay Area while infectious.
Santa Clara Co. resident confirmed to have measles: public health
(KRON) — The County of Santa Clara Public Health Department is warning of a public measles exposure in San Francisco International Airport (SFO) and Santa Clara County. Santa Clara Public Hea…
Health officials confirm case of measles in a Santa Clara County resident
The Public Health Department issued a warning regarding potential public exposure to measles.
Health advisory issued in Buckingham amid measles outbreak
Virginia health officials have marked more than 100 cases of measles in 2026, with most of those tied to an outbreak in Buckingham County, where residents are now being warned to avoid gatherings t…
Kirby Center celebrating 40 years of entertainment, education, community impact
WILKES-BARRE — Joell Yarmel, executive director of the F.M. Kirby Center for the Performing Arts, said this week that 40 years ago, a group of dreamers believed that live performance could transform a community.
How Eating Walnuts Before Bed Affects Your Sleep Quality
Eating walnuts before bed boosts melatonin, which helps you fall asleep faster and stay awake less. It's a simple way to improve your sleep quality.
'This might be the point of no return': Experts on the current measles outbreak and where we go from here
Live Science spoke with two authors of a "progress report" detailing America's ongoing measles outbreak.
Vikings hire Andrew Healy, Trent Kirchner as assistant GMs
The Vikings are hiring Andrew Healy and Trent Kirchner as assistant General Managers under new General Manager Nolan Teasley, Alec Lewis of TheAthletic.com reports.
What Genres and Streamers Won 2025? And Who Lost? Plus Six Strategy Thoughts
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Okay, time for the tenth and final article in my ten-part series recapping 2025. As I wrote two articles ago, my barometer for whether these articles are worth writing/publishing is whether they yield strategic insights, and once again, every subsection in this article has a strategic takeaway (or two). Honestly, these are the most important takeaways, since I step back and look holistically at the streaming wars in 2025. After I declare which streamers won and lost the year and which genres won and lost the year, I have six bonus thoughts. If you’d like to review the whole series... You can find the film flops here and here. You can find the TV shows flops here and here. You can find the top films here. You can find the top TV shows here, here and here. Then I declared my winners and losers in various categories here. You can find my 2024 recaps here. You can find the 2023 recaps here and here. And my 2022, 2021 and 2020 are all stored here. Yeah, it’s halfway through the year, and I’m just finishing this series up now. This year, I tried to space things out to not clog up my writing calendar, plus I had to wait for Fallout to (finally) drop off the charts. Well, that ended up pushing this series wayyyyy too far back on the calendar. Oh well. Next year, the goal will be to finish this series in March, but frankly, I just need more staff to make that happen. So please subscribe. Or, if you’re an advertiser (movie studio, FYC firm, or other), please reach out. Subscribe Streamer of the Year: Netflix Honorable Mention: Paramount (and CBS) So, just last week, I wrote about how Netflix has lost seven of its top twelve scripted shows in the last year. And I shared two very dour looks at Netflix’s potential slowdown this year and last. Guess what? They’re still the number one streamer in America. In 2025, they dominated new streaming shows (even if most of those new hit shows aren’t coming back for future seasons), they had the two biggest films, and they had the top returning TV show by a mile. The world is complicated, nuanced and messy. There may be warning signs of a future Netflix slowdown, but in 2025, Netflix was still the number one streamer. Note what I didn’t say? That Netflix has “won” the streaming wars, because obviously the streaming wars are still ongoing and, more importantly, YouTube is still growing—so now YouTube has “won” the streaming wars?—while Netflix’s share of TV consumption has stalled out. Avoid simplistic talking points, especially if they’re constantly repeated and could fit on a bumper sticker. I had trouble picking the second-place streamer this year, because all of the candidates for second place—Prime Video, HBO Max, and Paramount+—had some hits, but no one stood out. Then I saw this update from Nielsen on the top shows on TV in the 2025-206 season. Sure enough, Netflix had five of the top ten shows! And they had ten of the top 31 shows and fifteen of the top fifty. But CBS/Paramount+ actually had more shows in the top thirty and the top fifty. Paramount+/CBS had twelve of the top thirty shows and nineteen of the top fifty. Let me emphasize that: CBS/Paramount+ had more top shows in the 2025-2026 season than Netflix. And this look was just for TV shows, not live sports, an arena Netflix barely plays in. Meanwhile, Paramount-Skydance’s market cap is a fraction of Netflix’s. That’s weird, right? Streaming Loser of the Year, TV… We’re just getting started with this issue, but the rest is for paid subscribers of the Entertainment Strategy Guy, so if you’d like to find out… ...what streamer lost the year in TV... …whether Netflix could win the title for “film” streamer too… …who won the Disney vs Warner Bros. battle for theaters… ...what TV genres won and lost the year... ...what film genres won and lost the year... ...what film genre people think is thriving on streaming but isn’t… …why F-BOSSS TV shows don’t hold the same sway in the 2020s… …what it means to “flop” as a film on streaming… …UK shows underperforming on streaming… And a lot more... ...please subscribe! We can only keep doing this great work with your support. If you’d like to read more about why you should subscribe, please read this article about the Streaming Ratings Report, why it matters, why you need it, and why we cover streaming ratings best.
It’s my tree. Why can’t I cut it down?
Can the government stop you from cutting down your own tree? In many towns and cities these days, removing a tree now requires a permit. You might have to pay a fee, or promise to plant replacement trees. But sometimes, the city won't let you cut down the tree at all, even a tree in your own backyard.That's because trees are important for air quality, for flood control, and for public health. They help keep neighborhoods cool on hot days. But some think that tree protection laws have gone too far — that they might even be unconstitutional.On today's episode, it's the latest showdown between property rights and local zoning laws. Typically, towns and cities enjoy a lot of power when it comes to zoning and permits. They can ban certain types of buildings. They can make you paint your house a certain color. But can they make it illegal to cut down a tree? And what does it mean to "own" a piece of property anyway?Support:Planet Money+Read: Our book: Planet Money: A Guide to the Economic Forces That Shape Your Life Our weekly longform Planet Money newsletterOur weekly Indicator round-up newsletterFollow: InstagramTikTokYouTubeFacebookThis episode of Planet Money was hosted by Jeff Guo and Amanda Aronczyk. It was produced by James Sneed and Emma Peaslee, edited by Jess Jiang, and fact-checked by Vito Emanuel. It was engineered by Robert Rodriguez and Cena Loffredo. Alex Goldmark is our executive producer.
VDH asks for community's help to stop spread of measles in Buckingham area
The Virginia Department of Health's Southside District is asking for the community's help in stopping the spread of measles.
Health officials issue advisory about large gatherings as measles outbreak grows in Buckingham County
There have been 89 confirmed measles cases in the county this year.
Politics Chat, June 11, 2026
A newsletter about the history behind today's politics.
How health sleuths are watching for threats like measles during the World Cup
While millions of soccer fans cheer or groan over World Cup matches spanning North America, health officials will be on high alert for germs.
Tuffy Latour Elected Vice President of Sport on IBSF Executive Committee
SALZBURG, AUSTRIA (June 11, 2026) – During the ongoing 2026 International Bobsleigh & Skeleton Federation (IBSF) Congress, USA Bobsled/Skeleton (USABS) is proud to celebrate the election of longtime coach and leader Tuffy Latour to the IBSF Executi...
Using AI for medical advice; pelvic floor exercises; the hidden dangers of burning incense; plus other stories with Vanderbilt Health sources
Colin Walsh, MD,Associate Professor of Biomedical Informatics, was on WTVF News Channel 5‘s “Morningline” show in an interview about whether or not it is safe to use AI for medical advice. Time magazine reporter Stacey Colino interviewed Elisabeth Sebesta, MD, Assistant Professor of Urology, for a story about pelvic floor exercises for issues including menopause, erectile dysfunction and urinary incontinence in men. “Each Breath,” published by the American Lung Association, quoted Brian Christman, MD, Adjunct Professor of Medicine, for a story about the hidden dangers of burning incense. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Healthline (low vaccination rates lead to more cases of measles, whooping cough and other preventable diseases); ABC News (U.S. measles cases surpass 2,000 for second year in a row); and CIDRAP News (high-dose flu shots cut rates of hospitalization in older adults). Sarah Rohde, MD, Associate Professor of Otolaryngology-Head and Neck Surgery, was quoted in a People magazine story on patient Makalii Andrade, a surfer from Kauai Island who suffered a serious neck injury in 2022 and recently underwent surgery at Vanderbilt Health to begin the final phase of his recovery. James Crowe, MD, Director of the Vanderbilt Center for Antibody Therapeutics, for a piece in Nature about antibodies against a strain of Ebola. SFGATE reporter Gillian Mohney interviewed Xue Zhong, PhD, Research Assistant Professor, Division of Genetic Medicine and Clinical Pharmacology, for a story about a study of a blood test looking at Alzheimer’s disease biomarkers. Matthew Franklin Mart, MD, Assistant Professor of Medicine, was quoted in a Healio story about how inflammation and illness severity is linked to less cognitive resilience after a person has been an ICU patient. The “How We Really Feel” podcast host Sula Windgassen, PhD, interviewed Lindsey C. McKernan, PhD, MPH, Associate Professor of Psychiatry & Behavioral Sciences, Physical Medicine & Rehabilitation and Urology, for an episode focusing on pelvic and bladder health. The podcast is also available on YouTube and the podcast website. In addition, podcaster Monica Sanford interviewed cardiologist Mark Glazer, MD, for her podcast “The Monica Sanford Show”; the two-part interview is here and here.
How Vancouver is winning over small businesses
New funding, partnerships and city support are making the once-sleepy suburb more attractive.
🏆 Y! Sports AM: Greatest comeback ever
A Wu-Tang Clan prayer and a gutsy Knicks performance delivered magic at the Garden.
Former CFTC Chair Gary Gensler on regulating sports betting: Let the states do it
Gary Gensler, former CFTC chairman under President Obama and former SEC chairman under President Biden, joins 'Squawk Box' to discuss why he's filing an amicus brief arguing Congress did not intent to make the CFTC the nationwide regulator of sports betting when it passed the Dodd-Frank Act in 2010, regulating sports betting, his thoughts on prediction markets, insider trading concerns, and more.
Study: Less sedentary time, more light activity may lower key health risk in pregnancy
University of Iowa researchers recommend a daily mix of movement and sleep, along with a cap on sedentary time, to lower the risk of hypertensive disorders in pregnancy.
The U.S. and Iran Stumble Back Into War | WSJ Politics Newsletter for June 11
Plus, the dilemma facing women in Maine, and Bill Gates testifies to Congress over his links to Jeffrey Epstein.
‘She slept in the hallway on a lawn chair’: how Bettina’s astonishing art outgrew her Chelsea Hotel room
The reclusive figure spent decades filling every surface of her apartment at the legendary New York hotel with artworks that rose in teetering piles. Some are now on display for the first time in Glasgow
Anguished Parents. Doctors In Tears. Utah's Long Measles Outbreak Takes A Toll.
By Amy Maxmen and KFF Health News HealthDay ReportersTHURSDAY, June 11, 2026 (HealthDay News) — Ben Dowse hadn’t expected to treat measles when he became a doctor, but there he was, examining a newborn exposed to the virus in the womb. The infected mother had given birth just hours earlier. The ...
Knicks owner James Dolan says President Trump actually didn't fall asleep during Game 3 of NBA Finals
Democrats Try to Move Past ‘Cultural Pandering’ to Latinos for Midterm Elections
The party is trying desperately to win back some voters in the key swing group.
SGMC Health Honors Booker-Orr with Safe Care Award
SGMC Health recognized Crisp Booker-Orr, Sleep Lab Technician at SGMC Health Smith Northview, as the latest recipient of the Safe Care Award.
Health Sleuths Are Watching for Disease Threats During the World Cup
WASHINGTON (AP) — While millions of soccer fans cheer or groan over World Cup matches spanning North America, health officials will be on high alert for germs. A heat wave may be the most obvious health threat. But infectious diseases can spread in a crowd, and experts are set to scrutinize ...
US measles cases pass 2,000 as outbreak nears worst in decades
Outbreak driven by falling vaccination and misinformation as federal public health cuts hamper state response
Amazon’s Echo speakers can now help kids wind down and fall asleep
Amazon wants to make bedtime less of a struggle.
Could Control of Congress Run Through Northern Maine?
The state’s vast rural areas, which make up the swing Second Congressional District, will be important in November.
Opinion | No Country for Ambitious Women
Republicans have spent years disparaging all things associated with women. Now Democrats are following suit.
🏆 Y! Sports AM: Best Stanley Cup ever?
It's starting to feel like we might be witnessing an all-time classic.
Cell Therapy Clinical Trials: Breaking Down the Science
Breakthrough T1D is here to answer all of your questions about islet cell therapies, from the research lab to real-world treatments.
Business Restructuring Review Vol. 25 No. 3 May-June 2026
In This Issue Texas Bankruptcy Court Adopts Barnet Rule Requiring Foreign Debtor to Have U.S. Assets to Be Eligible for Chapter 15 Relief In In re Siu-Fung Ceramics Holdings Limited, No. 24-33299, 2026 WL 382424 (Bankr. S.D. Tex. Feb. 10, 2026), the court denied petitions for chapter 15 recognition of Hong Kong bankruptcy and liquidation proceedings commenced on behalf of an individual debtor and a group of companies that he owned or controlled. According to the court: (i) the corporate debtors' Hong Kong liquidation proceeding was not eligible for chapter 15 recognition because the attorney retainer upon which such relief was based was not funded until nine months after the chapter 15 petition date; and (ii) the individual debtor's Hong Kong bankruptcy case could not be recognized because the debtor's "center of main interests" on the chapter 15 petition date was not in Hong Kong, and he did not even maintain an "establishment" there. [read more …] Southern District of Texas Clarifies Post-Purdue Course for Consensual Third-Party Releases and Gatekeeping Provisions In In re Container Store Group, Inc., 676 B.R. 356 (S.D. Tex. 2026), appeal filed, No. 26-20166 (5th Cir. Apr. 14, 2026), cross appeal filed, No. 26-20166 (5th Cir. Apr. 24, 2026), the U.S. District Court for the Southern District of Texas addressed consensual third-party releases and gatekeeping provisions in the aftermath of the U.S. Supreme Court's ruling in Harrington v. Purdue Pharma L.P., 603 U.S. 204 (2024). Consistent with existing Fifth Circuit precedent, the court confirmed that, in appropriate circumstances, consent for third-party releases may be obtained through a creditor's failure to opt out of granting that consent. But, the court ruled, consent through an opt-out mechanism essentially can never be inferred for creditor classes that stand to receive no recovery under a chapter 11 plan and that are deemed to reject the plan by operation of applicable bankruptcy law. Instead, those classes must affirmatively opt in to any release. The court also narrowed and remanded the bankruptcy court's acceptance of a broad gatekeeping provision, ruling that such provisions must correspond to the restrictions established by Fifth Circuit precedent. [read more …] Delaware Bankruptcy Court: Initial Transferee Need Not Be Defendant in Fraudulent Transfer Avoidance and Recovery Litigation The Bankruptcy Code gives a bankruptcy trustee the power to avoid asset transfers that are either made with the intent to defraud creditors or that are "constructively" fraudulent because an insolvent debtor did not receive adequate value in exchange. The Bankruptcy Code also permits recovery of an avoided transfer from not only the initial recipient, but also from subsequent transferees. Courts disagree over whether a transfer must actually be avoided before the trustee can seek recovery from a subsequent transferee and whether the initial transferee must also be a defendant in the recovery litigation against a subsequent transferee. The U.S. Bankruptcy Court for the District of Delaware weighed in on this debate in Phillips v. SS Associates LLC (In re ONH AFC CS Investors, LLC), No. 23-10931 (CTG), 2026 WL 312892 (Bankr. D. Del. Feb. 4, 2026). The court adopted the majority view, ruling that the initial transferee need not be a defendant in avoidance and recovery litigation against a subsequent transferee, but that the trustee must establish the elements necessary to avoid the initial transfer as part of the recovery litigation. [read more …] New York Bankruptcy Court Weighs In on Adequate Assurance of Future Performance under Assigned Leases and Chapter 11 Plan Exculpation Provisions In order to assume and assign an executory contract or unexpired lease, a bankruptcy trustee must cure most defaults under the agreement and provide "adequate assurance" of the assignee's future performance. However, the Bankruptcy Code provides no guidance as to the meaning of "adequate assurance" other than with respect to shopping center leases. In In re Broadway Realty I Co. LLC, No. 25-11050, 2026 WL 147505 (Bankr. S.D.N.Y. Jan. 19, 2026), the U.S. Bankruptcy Court for the Southern District of New York examined this issue in connection with a proposed assignment of thousands of residential leases as part of a free-and-clear sale of debtors' properties. The court held that "adequate assurance" does not mean a guarantee of the assignee's future performance, but merely demonstration that the assignee has the ability to satisfy the underlying obligations. The bankruptcy court also ruled that an exculpation provision in the debtors' chapter 11 plan exonerating non-estate fiduciaries from liability for actions taken in connection with the chapter 11 case was unobjectionable, provided it was limited in scope to postpetition conduct and actions taken in connection with implementation of the plan after its effective date. [read more …] Newsworthy Corinne Ball (New York) (Hall of Fame), Bruce Bennett (Los Angeles), Carl E. Black (Cleveland), Jeffrey B. Ellman (Atlanta), Brad B. Erens (Chicago), Gregory M. Gordon (Dallas), Heather Lennox (Cleveland/New York), Joshua M. Mester (Los Angeles), and Kevyn D. Orr (Washington) were included in the 2026 edition of Lawdragon 500 Leading Bankruptcy and Restructuring Lawyers. The Daily Business Review selected Isel M. Perez (Miami) as an "On the Rise" winner for the Florida Legal Awards. The Florida Legal Awards annually recognize those who have made significant contributions to the legal industry in Florida. Dan T. Moss (Washington/New York) was inducted as a Fellow in the 37th Class of the American College of Bankruptcy at its Annual Meeting in March 2026 in San Antonio, Texas. Christine Borries (Munich) was ranked in the practice area Restructuring/Insolvency in the 2026 edition of Chambers Germany. The 2027 edition of The Best Lawyers in Singapore™ recognized Sushma Jobanputra (Singapore) in the practice area Insolvency & Reorganization. The restructuring transaction involving Eissmann Automotive North America, Inc. received the "2025 Turnaround of the Year (Large Company)" at the Turnaround Management Association (Detroit) Annual Awards Reception. T. Daniel Reynolds (Cleveland) and Nick Buchta (Cleveland) represented subsidiaries of Eissmann Group Automotive in connection with the parent company's German insolvency proceedings. Roger Dobson (Sydney) is among 40 Jones Day lawyers recognized by The Best Lawyers in Australia 2027 for his contributions in Banking and Finance Law; Distressed Investing & Debt Trading; Insolvency and Reorganization Law; Litigation. An article written by Corinne Ball (New York) titled "Ard Finance—A Global Enterprise Combining an LME With a Foreign Insolvency Proceeding and Chapter 15" was published in the April 21, 2026, edition of the New York Law Journal. An article written by Alex Sapp (New York) titled "Recent Developments in Section 510—Subordination" was published in the 2025 edition of the Norton Annual Survey on Bankruptcy Law. An article written by Brad B. Erens (Chicago) titled "New York Bankruptcy Court Approves Insider DIP Litigation Financing" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Corinne Ball (New York), Dan T. Moss (Washington/New York), David S. Torborg (Washington), and Isel M. Perez (Miami) titled "New York District Court Affirms Narrow Scope of 'Public Policy Exception' in Chapter 15 Cases" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Jeffrey B. Ellman (Atlanta) titled "Statutory Cap on Lease Rejection Damage Claims in Bankruptcy Applies to Solvent Debtors" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Trisha L. Mowbray (Real Estate; Chicago) and Ryan Sims (Washington) titled "Chapter 11 Plan that Abridged Non-Debtor Lessee's Rights to Remain in Possession After Rejection Unconfirmable as Having Been Proposed in Bad Faith" was published on April 6, 2026, by Lexis Practical Guidance. Lawyer Spotlight: Ben Rosenblum Ben Rosenblum, a partner in the New York Office, represents debtors, creditors, and other parties in out-of-court restructurings and court-supervised proceedings, including chapter 11 cases, municipal bankruptcies, international insolvency matters, and stockbroker liquidations. His experience spans industries such as manufacturing, shipping, mining, aviation, energy, real estate, and telecommunications. Ben's notable debtor representations include Peabody Energy, the City of Detroit, Chrysler LLC, Spansion Japan, and Dana Corporation. Significant creditor representations include General Maritime Corporation, Calpine Corporation, American Home Mortgage, and Murray Energy. He currently represents creditors in Puerto Rico's restructuring. He also has extensive experience advising financial institutions on bankruptcy law as applied to derivatives.