SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " transport " 434 found 🔀 AI-powered Shuffle
Health Data Utilities as Essential Public Infrastructure: A Cooperative Federalism Architecture
Federal interoperability initiatives like Trusted Exchange Framework and Common Agreement transport clinical records across boundaries but fail to aggregate and enrich state-governed datasets, including Medicaid claims, prescription monitoring records, and social service registries.
Burning through Türkiye's GDP: The high cost of fossil fuel PM2.5 pollution on public health – Centre for Research on Energy and Clean Air
Türkiye’s reliance on fossil fuels is generating massive air pollution health costs both within the country and throughout the region. This report finds that fossil fuels account for more than half (52%) of Türkiye’s population exposure to PM2.5 air pollution. The cumulative health impacts are estimated to cost the Turkish economy approximately USD 55 billion each year, equivalent to 4.1% of national GDP in 2024. The pollution is also responsible for roughly 26,500 deaths per year in the country, including deaths from cardiovascular and respiratory diseases, lung cancer, stroke, and diabetes.The impacts begin at the very start of life, with fossil-fuel-derived PM2.5 pollution contributing to an estimated 8,000 preterm births, 8,200 low-birthweight infants, 5,100 new cases of childhood asthma, and 6,500 emergency-room visits for asthma each year in Türkiye.Beyond the estimated deaths each year in Türkiye, air pollution from the country’s fossil fuel emissions also contributes to deaths and economic losses in neighbouring countries. In 2024, these emissions were estimated to cause: 32,000 deaths and USD 2.1 billion in economic burden in Egypt; 1,700 deaths and USD 0.2 billion in economic burden in Syria; 800 deaths and USD 0.8 billion in economic burden in Iraq; 500 deaths and USD 4.5 billion in economic burden in Israel; and 400 deaths and USD 1.5 billion in economic burden in Greece.Türkiye currently has no national ambient air-quality standard for PM2.5, despite the substantial health burden associated with exposure to the pollutant. Figure — The percentage of annual PM2.5 emissions in Türkiye’s fossil fuel emissions, using the EMEP emission inventory and EMEP MSC-W chemical transport model Key findings Türkiye’s fossil fuel emissions (from domestic sources as well as international aviation and shipping) account for 52% of population exposure to PM₂.₅ nationwide. PM2.5 pollution attributable to Türkiye’s fossil fuel use is responsible for approximately 26,500 deaths in the country every year, including deaths from cardiovascular and respiratory diseases, lung cancer, stroke, and diabetes. Children are among the most affected, with fossil fuel-derived PM2.5 pollution contributing to an estimated 8,000 preterm births, 8,200 low-birth-weight infants, 5,100 new cases of childhood asthma and 6,500 emergency room visits for asthma each year. The cumulative health impacts of fossil fuel-derived PM2.5 pollution are estimated to cost the Turkish economy approximately USD 55 billion each year, equivalent to 4.1% of national GDP in 2024. Transboundary pollution attributable to Türkiye’s land-based fossil fuel emissions also leads to thousands of deaths in five neighbouring countries, with estimated economic burden per year (as of 2024) reaching USD 2.1 billion in Egypt (3,200 deaths), USD 0.2 billion in Syria (1,700 deaths), USD 0.8 billion in Iraq (800 deaths), USD 4.5 billion in Israel (500 deaths), and USD 1.5 billion in Greece (400 deaths). Türkiye currently has no national ambient air quality standard for PM2.5, despite the substantial health burden associated with exposure to the pollutant. Reducing fossil fuel use and emissions across Türkiye’s energy, transport and industrial systems would deliver substantial air quality and public health benefits by reducing exposure to PM2.5 and preventing associated illness and deaths. Figure — Annual deaths attributable to Türkiye’s land-based fossil fuel emissions in the five most affected countries, based on 2024 emissions
Transportation Secretary Addresses NBAA-BACE, Announces Major AAM Milestone
Secretary of Transportation Sean Duffy addressed NBAA-BACE in Las Vegas and announced a major AAM milestone: the first manufacturer approved to operate eVTOL aircraft with passengers aboard for market research.
Preparing for cascading climate risks
Arizona communities already understand that climate hazards rarely occur in isolation. Extreme heat can drive up electricity demand, drought can increase wildfire risk, and flooding can disrupt transportation, water systems, housing and local economies. Because these systems are connected, a disruption in one can quickly threaten public health and safety.
Arkansas awards $16 million for trails, sidewalks and pedestrian improvements
The Arkansas Department of Transportation has awarded more than $16.1 million in federal funding for 47 projects across the state, including improvements to sidewalks, walking trails, bicycle routes and recreational...
Student Health Center inaccessible in fall 2026
By Cal Sutton Rider students were not able to receive on-campus medical attention for the beginning of the fall 2026 semester. Concerns grew as the semester proceeded and students were referred to outside resources, which are exceedingly difficult for students without personal transportation to access. Inconsistencies were found in the Student Health Center’s responses to… Continue Reading Student Health Center inaccessible in fall 2026
30 residents of Massachusetts assisted living facility hospitalized in weeks after woman's death, health director says
Hopkinton's health director says 30 residents of Golden Pond Assisted Living Facility have been transported to the hospital in recent weeks as an investigation is ongoing at the facility.
Cane-Champ-Puck-Stormy-Whaler-credit-Museum-of-Life-Science-2048x1536.jpg
Endangered red wolf pups Cane, Champ, Puck, Stormy and Whaler prepare for transport from Durham to a new conservation center in New York.
Covenant Health helicopters take flight to speed up medical transport in East Tennessee
KNOXVILLE, Tenn. (WATE) — Covenant Health Air is lifting off the ground, saving lives in East Tennessee. It unveiled two new medical helicopters on Monday, one based out of Rockwood and the other o…
This Week: Politics 101, 20th Street Bikeway, Muni Trivia
Here is a list of events this week. Monday/Tonight! SF Politics 101 with Joel Engardio. Learn how local politics shaped San Francisco. Monday/tonight, October 19, 5:30-6:45 p.m. SPUR Urban Center, 654 Mission Street, S.F. Wednesday 20th Street Protected Bikeway Ribbon Cutting. The Oakland Department of Transportation, city officials, Bike East Bay and other community partners will celebrate the completion of the 19th Street BART to Lake Merritt Urban Greenway. Wednesday, October 21, 1:30 p.m. 400 Thomas L Berkley Way, Oakland. Thursday 2026 Silver SPUR Awards. This SPUR event brings together elected officials and business, civic, and philanthropic leaders to celebrate four individuals and their contributions. Thursday, October 22, 4-7:30 p.m. Blue Shield of California Theater at YBCA, 700 Howard Street, S.F. Get tickets here. Friday Woman and Non-Binary Morning Ride. Join the San Francisco Bicycle Coalition for a socially distanced bike ride for women and nonbinary cyclists. Friday, October 23, 7:15-8:45 a.m. McLaren Lodge, 501 Stanyan Street, S.F. Friday Muni Trivia Night. Bring your friends or come solo and make some new ones. Friday, October 23, 7:30 p.m. Standard Deviant Brewing, Pier 70, suite 195, 1070 Maryland Street, S.F. RSVP here. Saturday Fifth Annual Firefighter Family Ride. Join SFFD, SF Safe Routes to School, and the SF Bicycle Coalition for a fun, low-stress bike ride through one of the city’s most beautiful routes. Saturday, October 24, 10:30 a.m.-1 p.m. Panhandle Park Blacktop (Fell & Ashbury) to JFK Promenade (Whale’s Tail). Sunday Canvas for No on Prop G. Join the San Francisco Bicycle Coalition to canvas for No on ‘G’ to save Sunset Dunes Park. Sunday, October 25, 10 a.m.-12 p.m. Marina Blvd & Laguna Street, S.F. Got an event we should know about? Drop us a line.
World Affairs Council of the Upstate to host ‘Supply Chains’ panel discussion on Oct. 29
The program will explore how geopolitical tensions, shifting trade policies, transportation challenges and changing global markets are reshaping supply chains.
First-of-Its-Kind Egyptian Study Reveals Saudi Arabia’s Socioeconomic Transformation Through Entertainment
A pioneering Egyptian doctoral study in management at the Arab Academy for Science, Technology and Maritime Transport (AASTMT) has revealed a profound
Orphaned walrus calf rescued from nearby polar bears in Alaska
The calf was transported over 800 miles to safety—without becoming a snack.
Duke Health debuts three autonomous delivery robots to help healthcare providers
Duke Health’s autonomous robots are transporting supplies throughout the university's hospital in Durham.
AASHTO Journal - State DOTs Use Art to Promote Safety, Health, Beautification
Across the country, state departments of transportation are using a bevy of artistic approaches to promote safety, health, and community beautification efforts. [Above photo by Oklahoma DOT] For example, the Oklahoma Department of Transportation is currently seeking student participants for its “Keep Our Land Grand” poster contest. Formerly known as the “Trash Poster Contest,” the […]
J.B. Hunt third-quarter earnings rise narrowly, revenue up 20%
J.B. Hunt Transport Services Inc., a Lowell-based transportation services company, posted gains in earnings and revenue in the third quarter of 2026 as freight demand and costs rise. After markets...
Detroit’s People Mover to get 12 refurbished rail cars under $10M state grant
Michigan is awarding $10 million to help replace the Detroit People Mover’s rail cars and another $2 million to study downtown Detroit transit improvements as part of $65 million in transportation grants.
A Major Labor Boom in CNY? Not Here Yet
With so many major projects going on — Micron, I-81 viaduct and others — job growth is predicted to increase. But so far the number of jobs in the region has declined By Aaron Gifford [caption id=attachment_11065 align=alignright width=350] Amy Stage, deputy director at the Manufacturers Association of Central New York (MACNY): “For us, the conversation isn’t just about filling jobs. It’s about creating sustainable pathways that help people see a future for themselves in manufacturing.”[/caption] The I-81 viaduct project in Syracuse and Micron facility construction in Clay are expected to create a major labor boom for Central New York. But for the time being, the number of jobs here has actually decreased in the past year. The New York State Department of Labor reported that, for the annual comparison of June 2025 to this past June, private sector jobs decreased by 2,200 or less than 1% to 260,000. Job gains were concentrated in leisure and hospitality (+700), private education and health services (+400) and other services (+300). Job losses for that annual period were reported in the areas of trade, transportation and utilities (-1,500); professional and business services (-1,000); financial activities (-500); mining, logging and construction (-300); manufacturing (-200); and information (-100). The public sector job count rose over 12 months, with most growth concentrated in education, the state Department of Labor reported. Looking ahead, the Central New York economy is expected to benefit from both the Micron and I-81 viaduct projects over a period of several years. Initial job growth is foreseen in construction and computer and electronic manufacturing. Spin-off jobs will be created in the areas of professional and business services, health care and education, the state Department of Labor said in an email response to Oswego County Business magazine. “Population growth tied to the buildout of Micron Technology semiconductor complex in Clay is also expected to bring more workers and residents to the region, increasing demand for transportation services,” the agency said. New York Department of Labor highlighted current or projected job growth trends in various sectors. An increase in defense-related contracts at local high-tech employers has continued to support employment growth in the computer and electronic product manufacturing sector and Micron is expected to generate thousands of direct and indirect jobs as the project progresses. This sector paid an annual average wage of $117,500 in 2025 and employment in the sector is projected to grow by over 60% through 2032, making it the fastest-growing industry in the region. Typical occupations in this industry include electrical, electronic and electromechanical assemblers, software developers and industrial engineers, the state agency reported. Specialty trade contractors include several different types of tradespeople — electricians, plumbers, pipefitters and steamfitters and HVAC (heating, ventilation and air conditioning) mechanics and installers. Many of these positions are trained through apprenticeships, the state Department of Labor reported. The Interstate 81 construction project is generating local jobs, including construction laborers, projected to grow at a 6.4% rate, and operating engineers and other construction equipment operators, projected to grow at a 7.3% rate over the next several years. Construction of the Micron Technology facility is also “creating thousands of job opportunities that will continue over the next two decades,” the state agency reported. The specialty trade contractors sector paid an annual average wage of $86,200 in 2025. For Central New York, the challenge isn’t creating jobs, it’s filling them. Amy Stage, a deputy director at the Manufacturers Association of Central New York (MACNY), said meeting this unprecedented growth is a much larger task than just replacing retirees. “We’re seeing workforce gaps at every experience level,” she said. “Companies need entry-level employees, experienced technicians, supervisors, engineers and skilled trades professionals. The opportunity is tremendous, but we need more people entering these career pathways.” Employers are looking for people who can troubleshoot, read technical information, use computers and learn new processes, not just perform repetitive production work, Stage said. To address this demand, the MACNY created the Manufacturers Talent Institute, which aims to connect students and job seekers with meaningful career pathways while helping employers build their workforce. Twenty-one companies have so far signed up to provide opportunities for more than 800 students. “For us, the conversation isn’t just about filling jobs,” Stage said. “It’s about creating sustainable pathways that help people see a future for themselves in manufacturing.” Several manufacturing facilities in the region are in the midst of expansion: • TTM Technologies, a leading U.S. manufacturer of advanced electronics and interconnect solutions for aerospace, defense and high-technology markets, which has a plant in DeWitt, completed its buildout of an additional facility, adding 400 jobs and expanding production of high-tech circuit boards for defense and critical electronics applications. • In Cortlandville, the Byrne Hollow Crossing Plant, a dairy manufacturing and processing facility, is increasing its operations, creating 100 new jobs. • The Chobani yogurt company is building a 1.4-million square foot dairy processing facility in Oneida County. This will create more than 1,000 good-paying jobs and double Chobani’s New York state workforce, Stage said. Stage noted several ways that local, state and federal governments can help spur manufacturing job growth in this region. Elected leaders and public agencies could work with industry representatives to create pre-apprenticeship and registered apprenticeship programs seeking to upskill workers and improve employee retention. New York state has a variety of grants, tax incentives and financing programs to support site preparation, infrastructure, workforce development and capital investment. The U.S. Department of Labor has a pay-for-performance incentive program that provides employers $3,500 per new apprentice hired and retained for 90 days. MACNY was previously awarded an $87,000 federal grant that will cover 25 apprentices at nine companies. The manufacturing skills gap in the United States, at its current rate, could result in 2.1 million unfilled jobs by 2030, according to a study by Deloitte and The Manufacturing Institute. In New York state, that gap is on pace to exceed 100,000 unfilled positions within six years. Manufacturing companies will be counting on more women to help fill that gap. While women make up half of the overall U.S. workforce, they only account for 29% of the manufacturing workforce in this country, Stage said. “Pre-apprenticeship programs like Real Life Rosies help to bring awareness to the manufacturing industry to fill some of the gaps, but we have a long way to go and it starts with educating people at younger ages about careers in manufacturing and earn-and-learn opportunities,” she said. As for Micron, that $100 billion-plus project, considered the largest private investment in New York state history, is expected to eventually create up to 50,000 jobs throughout the region, factoring in the spin-off opportunities for construction and supply chains. The plant’s foundation was poured on July 9. “As America celebrates its 250th anniversary, data and memory are foundational to the modern economy — and Micron is increasing our U.S. investments to more than $250 billion through 2035 to meet that moment,” the company’s president and CEO, Sanjay Mehrotra, said in a news release. Bechtel, Micon’s construction partner in the project, reported that 4,500 people will be employed to help build the facility, including skilled craft professionals, local union members representing various trades and apprentices. The Syracuse-based CenterState CEO organization tallies the regional labor force at 397,582 workers (Onondaga, Cayuga, Cortland, Madison and Oswego counties). Job growth isn’t limited to the Central New York region. For the larger area covering portions of the Mohawk Valley, the North Country, the Southern tier, and the western part of the state, there are 155,601 employees in the advanced manufacturing sector, and 155,275 construction workers. The agency’s 2026 Economic Forecast report noted that 41% of community and business leaders surveyed said a shortage of skilled workers in this area remains a problem, though 77% shared a positive economic outlook for the year ahead. Beyond the semiconductor and advanced manufacturing areas, local business leaders also see growth in small manufacturing companies, storage businesses, housing, unmanned flight technology and general construction. “Productive reuse of property,” the report said, “will hopefully continue to preserve unique architecture while driving business.” The report identified several challenges for economic growth in the region, including an aging workforce, outdated equipment, the rising cost of raw materials and “the disconnect between the speed of business needs and the pace of talent readiness.”
Gaskin: White Stadium could hurt local businesses
White Stadium will create economic activity. The question is whether the surrounding businesses will participate in it — or pay part of the price for making the transportation plan work.
South Florida Business Journal Features NSU Research Leader in Discussion on Broward County’s Economy
NSU’s Robert Smith, Ph.D., interim assistant vice president of research, joined business, government, healthcare, and transportation leaders at the South Florida Business Journal’s Broward Forward Roundtable to discuss what will drive the county’s next phase of economic growth. Smith shared… Continue Reading →
Peach State Health Plan Highlights Impact of School-Based Health Centers in New "The Power of Partnership" Video
For many families, getting to a health appointment can mean navigating transportation challenges, limited provider availability and time away from work or school. School-based health centers offer...
Oct. 12 "Colorado Chamber Office Hours": Three gubernatorial candidates discuss business issues
Colorado's gubernatorial candidates discuss business issues such as regulatory reform, transportation funding and affordable housing.
Spotlight AZ: Sundt
From transportation and water infrastructure to advanced manufacturing facilities, Sundt Construction has helped build Arizona’s economy since 1929. Headquartered in Tempe, the 100% employee-owned company is investing in new facilities, workforce training and technologies to support the state’s next chapter of growth. In this Chamber Business News Spotlight, Sundt’s Alex Charland discusses the company’s new […]
Political campaign & advertising signs not allowed on public highway rights of way, MnDOT says
With election season in full swing, the Minnesota Department of Transportation (MnDOT) is reminding campaigners that state law prohibits the placement of political signs, or any advertising on highway right-of-way.
AECOM appoints Dwight Pullen to lead its global Transportation business
DALLAS (October 12, 2026) — AECOM (NYSE: ACM), the trusted global infrastructure leader, today announced it has appointed Dwight Pullen as Transportation Global Business Line Chief Executive, effective immediately. In this role, Mr. Pullen will lead AECOM’s global Transportation business, which is ranked No. 1 by Engineering News-Record. He assumes the role as AECOM pursues...
Bob on Business: A new place to tie up your horse — or your Honda
Also, Canadian transformers; real estate, mergers and acquisitions; and transportation.
MedStar Health introduces new helicopter to expand critical care capabilities
MedSTAR Transport, MedStar Health’s critical care transport program, is introducing a new Airbus H145 D3 helicopter to strengthen its ability to transport critically ill and injured patients across the Washington,
J.B. Hunt Q3 earnings, revenue to rise, analysts say
J.B. Hunt Transport Services Inc., a Lowell-based transportation services company, is expected to see earnings and revenue increase in the third quarter compared with the same period in 2025, according...
Trucking industry hit by string of bankruptcy filings as diesel costs surge
At least eight transportation-related companies sought Chapter 11 protection in September as the trucking industry grapples with higher fuel costs.
MedStar Health Introduces New Airbus H145 D3 Helicopter to Expand Critical Care Capabilities Across the Region
/PRNewswire/ -- MedSTAR Transport, MedStar Health's critical care transport program, is introducing a new Airbus H145 D3 helicopter to strengthen its ability...
US grants Aurora exemption for self-driving trucks safety feature
The U.S. Transportation Department said late Wednesday it approved a five-year exemption for Aurora and other self-driving trucking companies from rules that require drivers to place warning devices around a stopped truck.
Reliance Partners signs on as Gold-Level Partner of John "Art" Phillips Sales Institute - Gary W. Rollins College of Business
Reliance Partners, a national transportation insurance brokerage founded in Chattanooga, has joined UTC's John "Art" Phillips Sales Institute as a gold level corporate partner.
Atrium Health’s AirCare program reflects on four decades of patient transport
Atrium Health’s AirCare program marks four decades of patient transport, with reflections from an original flight nurse and the current director.
UCF Honors 8 Trailblazing Faculty with 2026 Luminary Awards
The honorees are advancing discovery across fields ranging from transportation safety and quantum science to tourism, disaster resilience and emerging technology.
Soldiers wounded in Iranian drone strike say military medical system failed them
The attack on the second day of the U.S. war with Iran killed six troops and injured dozens
WHO joins Pre-COP31 to advance climate action that delivers for people’s health
The World Health Organization (WHO) is joining Pacific leaders, governments and partners at Pre-COP31 in Fiji from 5 to 8 October to advance health priorities in climate action and strengthen the Pacific voice ahead of the 31st Conference of the Parties (COP31) to the United Nations Framework Convention on Climate Change (UNFCCC).COP31, to be held next month in Antalya, Türkiye, marks an important step for global climate and health action. Health is one of the 10 priority themes of the COP31 Action Agenda, “Dynamic and Resilient Health Systems”, and a dedicated Health Day will take place on 9 November, the first day of COP31. The inclusion of health reflects growing global recognition that climate action and health are closely connected. The climate crisis is affecting population health globally. Across the WHO Western Pacific Region, which includes Pacific island countries and areas, the consequences of climate change include extreme heat, cyclones, floods, rising sea levels, food and water insecurity, infectious diseases and disruptions to essential health services. The Pacific in particular faces additional challenges. A recent review of 76 hospitals in 14 Pacific island countries found that 62% of health facilities are located within 500 metres of the sea or a river, leaving them particularly exposed to flooding, storm surges and sea-level rise.Bringing Pacific priorities to the global climate agendaThe Pacific Pre-COP31 provides an important opportunity for Pacific countries and partners to consolidate regional priorities and bring the experiences and leadership of Pacific communities into global climate discussions.Pacific countries have been advancing practical approaches to protect health in a changing climate, including strengthening climate-resilient health systems, improving preparedness for extreme weather events, building resilient health infrastructure and mobilizing climate finance for health. “This Pre-COP is an important moment for the Pacific, bringing global climate discussions to a region that has long been at the forefront of the climate crisis. It provides an opportunity for Pacific countries and areas to set their priorities, experiences and leadership on the global stage, and to ensure that the realities of Pacific communities are genuinely reflected in the decisions made on climate action,” said Dr Saia Ma’u Piukala, WHO Regional Director for the Western Pacific.Throughout this week, WHO will co-convene and participate in high-level discussions and events focused on climate and health, climate resilience, adaptation, financing and implementation. “Climate finance is essential for resilient and healthy Pacific communities,” emphasized Dr Mark Jacobs, WHO Representative to the South Pacific and Director of Pacific Technical Support. “We must ensure that financing reaches the people, communities and essential services most exposed to climate risks, supporting locally defined priorities and investments.”WHO will work with partners to strengthen the integration of health considerations across climate policies and investments, including national climate plans and resilience initiatives.Health as a driver of climate actionAmid the risks to health and pressures on health systems, well-strategized and implemented climate action can deliver significant health benefits. Investments in clean energy, sustainable transport, resilient infrastructure, food systems and nature-based solutions have proven to reduce health risks while contributing to climate mitigation and adaptation.“Climate action is truly an investment in health. Cleaner energy, healthier food systems and climate-resilient health services can protect lives while building stronger communities. We now need to turn these opportunities into action and make health a core part of climate investments,” said Dr Sandro Demaio, Director and Head of Office, WHO Asia-Pacific Centre for Environment and Health in the Western Pacific Region. “These benefits demonstrate that climate action is not only about reducing future risks. It is also an opportunity to improve lives today while building healthier, safer and more resilient societies.”At COP31 next month, WHO will also support the Health Pavilion, which will bring together the global health community and partners to advance health and equity within climate negotiations. With COP31 poised to move health higher on the global climate agenda, WHO will continue working with countries and partners across the Western Pacific Region and globally to strengthen climate-resilient and low-carbon health systems, and ensure that climate action protects and improves people’s health.____________________Media contactsElizabeth Bennett, WHO Asia-Pacific Centre for Environment and Health in the Western Pacific Region, elizabeth.bennett@who.intJulia Dongwhan Shin, WHO Asia-Pacific Centre for Environment and Health in the Western Pacific Region, dong.shin@who.intWHO Western Pacific Communications, wprocom@who.int
Nonprofit transporting residents to healthcare receives pivotal partnership
Quest Inc. is a nonprofit in Central Florida that provides transportation services to people with developmental disabilities. (COURTESY OF QUEST INC.) A Central Florida nonprofit assisting residents with development disabilities to access healthcare appointments was selected for a pivotal partnership with a local hospital that will help expand services. Quest Inc. is a nonprofit that provides
Person transported to hospital after vehicle overturns in crash on Business Loop 70
KOMU 8 crews at the scene saw a car flipped over after a crash on Business Loop 70 East on Saturday night.
STC: Preparing the Workforce of Tomorrow
What does the future of transportation mean for the Rio Grande Valley workforce? South Texas College President Ricardo Solis sees opportunities in logistics, international trade, and emerging technology. Through industry partnerships, STC is connecting workforce training with employers’ needs and preparing for electric trucks, automation, and artificial intelligence.
Pharr International Bridge Expansion
More capacity for U.S.–Mexico trade. Pharr International Bridge Director Luis Bazan says phased truck operations for the bridge expansion are expected to begin in mid-September, with the official grand opening scheduled for November 12. The Pharr Truck Expo brought transportation professionals and the community together as the city prepares for this next chapter.
TRANCASA: A First Look at Electric Trucking
TRANCASA is preparing to test its first Tesla Semi, taking another step toward innovation in South Texas transportation. At the Pharr Truck Expo, Carlos Canales and his team showcased the company’s focus on technology and the future of cross-border logistics. How do you see electric trucks changing the industry?
Trimble still evaluating possible transport tech business sale
Trimble continues to weigh a possible sale of its transportation technology business after potential buyers approached the company with acquisition interest.
Jaunt celebrates 50-years of business
Public transportation company Jaunt is celebrating 50-years of business.
Alaska Airlines is moving to join American's transatlantic and transpacific revenue-sharing deals
The carriers plan to file for antitrust immunity with the U.S. Department of Transportation, with approval expected to take months
Travel plans? Here's what to know as measles exposures reach trains and games
Measles is traveling, with outbreaks in Pennsylvania, Ohio and New York, and exposures on transportation and in sports. What should you know before getting on a plane or train?
HRBT expansion enters final phase
The Hampton Roads Bridge-Tunnel expansion in Virginia is entering its final phase, aiming to increase capacity and improve travel by 2027.
American Airlines and Alaska Airlines announce plans for Alaska to join the Atlantic and Pacific Joint Businesses
The carriers anticipate filing for approval and antitrust immunity with the U.S. Department of Transportation and seeking other relevant approvals from international regulators in the coming months.
Geotab receives Business Intelligence Group's 2026 Sustainable Transportation Award
/PRNewswire/ -- Geotab Inc. ("Geotab"), a global leader in connected operations, video telematics and AI-powered insights, today announced it has been named a...
Trimble keeps freight business sale on the table while unveiling new AI tools
Trimble is weighing the future of its transportation and logistics unit while continuing to invest in AI tools for its fleet customers.
Sea level rise reshaping California beach town and threatening rail line
San Clemente's North Beach is now split and officials have used rocks to shore up a seaside rail line. But residents say the structure is making erosion worse and more sand is needed to nourish the beach.
Enterprise Spending Is Up in 2026, According to Emburse Report
Research shows transportation accounts for ‘disproportionate’ share of growth
WHO recognizes healthy, innovative cities across the Western Pacific Region
Nine Healthy City champions from across the World Health Organization (WHO) Western Pacific Region received special recognition at an awarding ceremony during the 11th Global Conference of the Alliance for Healthy Cities in Sydney, Australia.The WHO Regional Office for the Western Pacific has presented the Healthy Cities Recognition Awards every two years since 2004 to celebrate innovative and impactful city-led initiatives that improve the health and well-being of urban populations.Eight cities received awards for their best practices, and one National Forum received the WHO Regional Director’s Special Award in recognition of its long-standing leadership in advancing the Healthy Cities movement.Awardees were selected through a rigorous evaluation process and recognized for demonstrating measurable, innovative and sustainable approaches to health challenges faced by cities.Remarking on the significance of the awards, Dr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control at the Regional Office, said that, “There is no single blueprint for a healthy city. What works in one context may need to be adapted to another. But by sharing our experiences, including what worked, what was challenging, and what we learnt along the way, we can help one another move faster and further.”Award-winning cities and initiativesThis year's awards recognize outstanding city-led initiatives that have demonstrated measurable impact, innovation and sustainability in advancing health initiatives for urban populations.Baguio City (Philippines) – Data for equity: informing action, improving healthDr Donnabel Tubera-Panes, City Epidemiologist – Medical Officer IV of the Health Services Office accepted the award on behalf of Baguio City. Photo credit: Maria BoyadgisBaguio City was recognized for developing a pioneering Livability Index that provides village-level data across all 128 barangays (villages), enabling evidence-based planning and more equitable allocation of resources. By integrating community participation and institutionalizing the index within city planning and budgeting processes, the city has demonstrated how data can drive action to reduce health and social inequities.Eunpyeong-gu (Seoul, Republic of Korea) – Communities living in vulnerable situations: advancing health equity through community engagementVice Mayor Honourable Ahn Hyoung Jun accepted the award on behalf of Eunpyeong-gu. Photo credit: Maria BoyadgisEunpyeong-gu was recognized for its inclusive health equity programme supporting vulnerable populations, including isolated older adults and LGBTQI+ communities. Through peer-led community networks, social cooperatives and inclusive service design, the district has strengthened access to care, promoted social inclusion and advanced community ownership of health initiatives.Madiun City (Indonesia) – Adapting and mitigating climate-related crises: building heat resilience and preventing flood-related health risksMs Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of Madiun City. Photo credit: Maria BoyadgisMadiun City was recognized for its SUPERMIE (Sustainable Public Environmental Management Initiative) – a community-based environmental governance model that addresses urban flooding, climate resilience and environmental sustainability. The initiative contributed to reductions in flood-prone areas, greenhouse gas emissions, diarrhoeal disease and dengue fever, while at the same time improving food security through neighbourhood food gardens. The programme has already been replicated in 15 cities and regencies across Indonesia.Macao Special Administrative Region (China) – Protecting communities from tobacco and alcohol-related harms: tackling commercial drivers of riskDr LO Iek Long, Director of the Health Bureau, Macao SAR, China accepted the award on behalf of Macao. Photo credit: Maria BoyadgisMacao SAR was recognized for implementing a comprehensive and integrated approach to tobacco and alcohol control. Through legislation, monitoring systems, enforcement, public awareness campaigns and multisectoral partnerships, the programme has strengthened protection against major risk factors for noncommunicable diseases and established a model that is highly transferable to other urban settings.Phnom Penh Capital City (Cambodia) – Safe, active and health-enabling transport: advancing health and reducing inequities in urban mobilityH.E. Khoung Sreng, Governor of Phnom Penh Capital City accepted the award on behalf of Phnom Penh Capital City. Photo credit: Maria BoyadgisPhnom Penh received the award for its Safe School Zone Project, which combines infrastructure improvements, speed management, enforcement, education and stakeholder engagement to protect children and communities. The initiative has demonstrated measurable reductions in crashes and vehicle speeds while providing a scalable model for safer urban mobility across the country.Quezon City (Philippines) – Transforming food environments: addressing policy, market and urban design drivers of health and nutritionMs Jirah Asa M. Sideco, Chief of the Nutrition Section of the Quezon City Health Department accepted the award on behalf of Quezon City. Photo credit: Maria BoyadgisQuezon City was recognized for its public food procurement policy that promotes healthier diets through government-run institutions and feeding programmes. Supported by strong policy frameworks and monitoring systems, the initiative improves access to nutritious food for vulnerable populations while serving as a benchmark for other local governments.Samarinda City (Indonesia) – Preventing violence and promoting gender equality: transforming urban systems, norms and spaces Mrs Rinda Wahyuni, Chairperson of Samarinda Healthy City Forum accepted the award on behalf of Samarinda City. Photo credit: Maria BoyadgisSamarinda City was recognized for its multisectoral approach to preventing violence and advancing gender equality. Responding to local evidence on violence against women and children, the city has positioned violence prevention as a public health priority, bringing together health services, schools, social welfare institutions, law enforcement, civil society and community leaders to strengthen prevention, reporting, survivor-centred support and legal protection. Through inclusive policies, community engagement and sustainable city financing, Samarinda has developed a locally owned and scalable model for creating safer, more equitable and inclusive urban communities.Singapore – Age-friendly cities: transforming systems to bridge generations for a healthier tomorrowDr Tan Weng Mooi, Director, Integrated Health Promotion, accepted the award on behalf of Singapore. Photo credit: Maria BoyadgisSingapore received recognition for its Healthy Precinct Framework, which translates national healthy ageing priorities into neighbourhood-level action. The initiative integrates preventive care, social support, service coordination and age-friendly environments while actively engaging older persons, caregivers and community organizations. Its expansion across multiple precincts demonstrates its scalability and long-term sustainability.WHO Regional Director’s Special AwardNational Forum for Indonesian Healthy Cities/Regencies (Indonesia)Ms Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of the National Forum. Photo credit: Maria BoyadgisThe WHO Regional Director's Special Award was presented to the National Forum for Indonesian Healthy Cities/Regencies (FKKSI) in recognition of its long-standing leadership in advancing the Healthy Cities movement across Indonesia. As a national platform bringing together local governments, communities, academia and civil society, FKKSI has played a critical role in promoting collaboration, capacity-building, knowledge exchange and advocacy. Its efforts have strengthened and institutionalized healthy urban development nationwide and established a model for multisectoral engagement in the Region. Healthy Cities for allThe 2026 Healthy Cities Recognition Awards highlight how cities can lead transformative action on health by addressing climate change, inequity, ageing, nutrition, mobility, social inclusion, violence prevention and the commercial determinants of health. The recognized initiatives demonstrate that local governments, communities and partners can work together to create healthier, safer and more resilient urban environments for everyone. As urban populations continue to grow across the Western Pacific Region, WHO remains committed to supporting cities in advancing health, equity and sustainable development through the Healthy Cities approach and the Alliance for Healthy Cities. ###Note to editorsSince 2004, the WHO Healthy Cities Recognition Awards have provided a platform for cities to share innovative and effective approaches to improving health and well-being. The awards recognize achievements in areas including climate resilience, healthy ageing, health equity, gender equality, tobacco and alcohol control, urban mobility, nutrition and data-driven governance. In 2026, more than 150 submissions were received from cities and local governments across the Western Pacific Region. The titles and affiliations of awardees are presented as they were at the time the photo was taken.______________For more information, or to arrange media interviews, contact: WHO Regional Office for the Western Pacific: wprocom@who.int
Inside the business of gony bags, Madagascar's ubiquitous plastic sacks
Go anywhere in Madagascar and you'll find gony – large woven polypropylene sacks used to transport and store everything from vanilla to cement. For the past 50 years, these hard-wearing bags have been…
UFC Issues Statement on Health Condition of Raoni Barcelos
The UFC has issued a statement on the health condition of veteran bantamweight fighter Raoni Barcelos following UFC Vegas 121.Here is the UFC’s statement in full, which was issued several hours after the conclusion of UFC Vegas 121:“Following his fight tonight, Raoni Barcelos was immediately transported to a Level 1 trauma center for evaluation. The […] The post UFC Issues Statement on Health Condition of Raoni Barcelos appeared first on HEAVY.
UFC Issues Statement on Health Condition of Raoni Barcelos
The UFC has issued a statement on the health condition of veteran bantamweight fighter Raoni Barcelos following UFC Vegas 121.Here is the UFC’s statement in full, which was issued several hours after the conclusion of UFC Vegas 121:“Following his fight tonight, Raoni Barcelos was immediately transported to a Level 1 trauma center for evaluation. The […] The post UFC Issues Statement on Health Condition of Raoni Barcelos appeared first on HEAVY.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Mark Gongloff: Private jets have a free-rider problem
If you try to take a free ride on, say, public transit in New York City, you’ll get in trouble with the law. If your mode of transportation is a
Buses mean business
Heavy-duty transit buses are a critical component of America's public transportation system, carrying approximately 3.8 billion passenger trips annually and representing nearly half of all public transit trips in the United States.
Local business feels the impact of diesel prices
Sierra Feed received 100% of its inventory through diesel powered transportation, they say the price of diesel has doubled and they have to get tough and creative to continue business.
Marijuana business eyes Oak Bluffs zoning amid legal disputes
A cannabis entrepreneur group’s plans to set up a dispensary on the Island fell through last year, and assets in 90 Dr. Fisher Road in West Tisbury, the former location of the Island’s only marijuana-growing facility, are being liquidated. But representatives of Black Harbor Group, which had rented the West Tisbury location, said they’re making […]
Opponent alleges US Rep. Ezell violated campaign finance laws. Ezell camp calls it a ‘political stunt’
The complaint focuses on the Chouest family, which owns shipbuilding company Edison Chouest Offshore. Family members donated to Ezell, who chairs the Subcommittee on Coast Guard and Maritime Transportation. Congress awarded the company a $950-million contract.
ICYMI: Protect College Sports Act Earns Support from Students, Coaches, ADs, Professors, University Presidents - U.S. Senate Committee on Commerce, Science, & Transportation
WASHINGTON, D.C. – Student athletes, coaches, professors, and presidents from universities and colleges from across the country have rallied behind the bipartisan Protect College Sports Act. The American Football Coaches Association (AFCA), the National Association of Basketball Coaches (NABC), and FBS Athletics Directors Association have all offered their support. Ruben Rojas Betanzos, a student athlete […]
The Mysterious Devil’s Arrows Stones Appeared in England 4,000 Years Ago. Scientists Just Learned Where They’re From.
Ice-flow models rule out natural transport, leaving prehistoric engineers as the only ones who could do it.
Pete Buttigieg Slams ‘Corruption’ in US Politics: ‘Corporate Money Is Flooding the Election’ and Big Pharma Will ‘Get Their Way’
Former Transportation Secretary Pete Buttigieg criticized what he described as corruption in U.S. politics, arguing that corporate money and political incentives have left Americans without a system t...
MTA boss Lieber says agency’s targeting ‘kooky’ work rules, health insurance contributions in labor talks with transit union
In the MTA's contract negotiations with the union representing nearly 40,000 New York City Transit workers — Transport Workers Union (TWU) Local 100 — the
In Business: Executive Express Providing Transportation Services in Brainerd Area
For a lot of people, getting to a destination can be just as important as the destination itself. Executive Express, a locally owned transportation business in the Brainerd Lakes Area, has been helping travelers get to and from airports, providing transportation for everything from business trips to special events. The…
Murkowski warns Canada trade fight could damage key Alaska relationship
Sen. Lisa Murkowski says trade disagreements with Canada can be resolved, but she is concerned about damage to a relationship important to Alaska's transportation, commerce and defense.
This Week: Phone Bank for Transit, SF Politics, Transit Tales
Here is a list of events this week. Monday/today! Phone bank with SFBike to Save Transit. The San Francisco Bicycle Coalition is phone banking and connecting with voters, explaining how vital it is to pass the Regional Transit Measure this November. Join them to help make sure our regional transit survives and thrives. Monday/today, September 21, 5-7 p.m. San Francisco Bicycle Coalition Office, 1720 Market Street, S.F. Tuesday Historic Photo Exhibit Tour. Moving San Francisco is a collaboration between the SFMTA and San Francisco Arts Commission and is on view at City Hall through November 25. During this informal tour, they will take an in-depth look at selected photos from San Francisco transit history and learn more about the stories and people behind them. Tuesday, September 22, 5-7:45 p.m. North Light Court inside City Hall, One Dr. Carlton B. Goodlett Place, S.F. Tuesday San Francisco Bicycle Coalition Board Meeting. SF Bicycle Coalition members are invited to attend all board meetings. Tuesday, September 22, 6-8 p.m. Register for Zoom link. Tuesday SF Politics 101 with Joel Engardio. SF Politics 101 is a look at how local politics work and the history that shaped San Francisco—brought to life with visuals and narrative storytelling. Tuesday, September 22, 6-7:15 p.m. SPUR Urban Center, 654 Mission Street, S.F. Register to attend. Wednesday Transit Tales: A Storytelling Night. Join SPUR and Muni Diaries at Local Economy for an evening of true stories inspired by riding transit. From unexpected encounters and meet-cutes to funny mishaps and heartfelt moments, Transit Tales celebrates the experiences that make public transportation unforgettable. Wednesday, 5:30-7 p.m. Local Economy, 6028 College Ave, Oakland. Saturday Group Ride: Richmond BART to Point Pinole. Join Bike East Bay for a family-friendly, no-drop group ride to Point Pinole Regional Shoreline. Saturday, September 26, 10:30 a.m.-3 p.m. Starts at Richmond BART Plaza, 1600 Nevin Plaza, Richmond. Saturday Shipwreck Cove Opening. Come see Sunset Dunes’s newest playground. Saturday, September 26, 3 p.m., Sunset Dunes and Kirkham, S.F. Saturday 55 Wine Line Progressive. Ride between Horsies Market & Saloon, Bar Part Time and Ruby Wine on the 55 Dogpatch bus. Saturday, September 26. Three locations in Dogpatch. See SFMTA site for more details on locations and times. Got an event we should know about? Drop us a line.
Jason Statham, The Making of Hollywood's Ultimate Bad Boy
Jason Statham rose from a sportsman and fashion model to become one of Hollywood's biggest action stars. His breakthrough came through Guy Ritchie's films, followed by iconic roles in The Transporter,...
Paved in frustration: Kings Highway businesses cite challenges of bridge reconstruction
A large-scale transportation project has some businesses in Nash and Texarkana feeling like they are on a rocky road.
‘It's awful’: How tariffs, soaring fuel costs and higher interest rates are squeezing American companies
Tariffs, soaring fuel prices and higher interest rates are squeezing American companies, particularly manufacturers, auto suppliers, retailers and transportation businesses.
WATCH LIVE: Pete Buttigieg keynotes Texas Democrats Johnson-Jordan Dinner
Former Transportation Secretary Pete Buttigieg delivers the keynote address at the Texas Democratic Party’s 12th Annual Johnson-Jordan Dinner as Democrats rally ahead of midterms.
Scientists transport antiprotons by road, store them in mobile vessel
Ninety-two trapped antiprotons have been transported outside the Antimatter Factory along a 4.66-mile route without particle loss or measurable degradation of the trap vacuum.
Rep. Pfluger's Mystic Alerts Act Advances Through Senate Committee on Commerce, Science, & Transportation
FOR IMMEDIATE RELEASE: 9/16/2026CONTACT: Madelon Clark Rep. Pfluger's Mystic Alerts Act Advances Through Senate Committee on Commerce, Science, & TransportationWASHINGTON, D.C. — Today, Congressman August Pfluger's (TX-11) bipartisan and bicameral
Owens prioritizes transportation over capital projects
Twenty-five years ago this week: Gov. Bill Owens announced that he was expanding the agenda for the special legislative session to include transportation.
Science Vs on the 49ers Substation: Anatomy of a Hatchet Job
In August, Pablo Torre Finds Out and Science Vs released an episode about my theory that electromagnetic fields from the electrical substation beside the 49ers facility may be contributing to the team’s run of soft-tissue injuries. As the originator of the theory, I was also a subject of the episode. I sat was interviewed by Wendy Zukerman and Rose Rimler of Sciene Vs. I sent them research, connected them with scientists, and spent hours digging through the City of Santa Clara’s and Silicon Valley Power’s records to help clarify critical details. Both Wendy and Rose came off as affable and professional, showing curiosity during the interviews, with Wendy going out of her way to question the “conspiracy theory” framing itself. Then they titled the episode We Solve the 49ers Viral Conspiracy Theory. I was familiar enough with their catalog that I never expected them to agree with my theory, but I did expect them to give it a fair hearing and to deliver their findings honestly. On both counts they came up short. They were not directly dishonest in anything they said, but rather in what they left out, in how what remained was cut, and in the picture painted by those two things in combination. They asked me to recorded the interview on my phone for better audio quality, and I held on to my copy for reference later. That turned out to be a fortuitous decision. Here is the raw audio of my first interview, unedited*. Only my side was recorded, so their questions aren’t on it, but you can generally infer them from the answers, and every claim I make below about what I said can be checked against my statements in this clip. (Note: Wendy had connection trouble at the beginning of the interview and was cutting in and out, which accounts for the false starts.) 0:00 -1:19:13 Audio playback is not supported on your browser. Please upgrade. Science Vs is a fun show. It is pitched at roughly a high-school understanding of science, for an audience that is skeptical, Snopes-oriented, and worried about misinformation. Take a claim circulating online, interview a supporter of the claim, interview consensus scientists, and then tell people which side of the line it lands on. I have listened to their episodes on raw milk, seed oils, 5G and other contested issues in the wellness space. I have problems with all of them, but each at least made an honest attempt to represent the actual range of scientific opinion by talking to credentialed scientists with differing perspectives. Dissenting researchers were heard from, answered, and often given a chance to respond. This episode did not do that. This article is not a relitigation of the science. I have written extensively about that already. This post is for the record. It is simply an accounting of what was wrong with their episode. Contents Is there a power plant next to the 49ers practice facility? — the clearest single example of getting something objectively wrong For the record — a high-level overview of all of the problems with their investigation Draw your own conclusions — why they had to make this episode at all What they left out about childhood leukemia — the exposure threshold, and playing games with statistics to minimize sick children What they left out about the mechanism — the body of literature they refused to cover, and evidence for the mechanism used against it The scientists Science Vs interviewed and did not air — four credential scientists who support myhe theory, recorded and cut, or not even called How they misrepresented me and my case — an answer severed from its question, and three telling edits How you would actually study the injuries — it doesn’t actually matter which team is the most injured, overall The theory: magnetic fields, oxidative stress, and collagen Since the episode never states my theory, here it is below. Those who are familiar with my work can skip this section. Electrical equipment produces magnetic fields, and those fields induce faint electrical currents in anything that passes through them, including people. My argument goes further than induced current. Mitochondria — the structures that generate a cell’s energy — run on continuous flows of electrons and protons, and those flows carry faint electromagnetic fields of their own. Maxwell’s principle of superposition shows that when two fields share the same space, they add together. An external field does not need to be strong to alter an internal field, it only needs to be present. The electron transport chain inside the mitochondria leaks a small fraction of its electrons by design, and those become reactive oxygen species — free radicals, which healthy cells use as signals. External magnetic fields cause the rate of leakage to change, increasing free radicals. When free radicals accumulate faster than the cell’s antioxidant systems can clear them, the result is oxidative stress. Oxidative stress is a recognized driver of chronic illness, including cardiovascular disease, neurodegeneration, diabetes and cancer, and it is in every medical school curriculum. One of its ordinary effects in connective tissue is that it switches on matrix metalloproteinases — MMPs, the enzymes that break collagen apart — while suppressing new collagen synthesis. Tendons are made of collagen. An athlete loading his soft tissue heavily six days a week is already creating oxidative stress in the tendons, so the addition of magnetic field exposure compounds the damage and inhibits repair, making him more susceptible to injury when enormous force lands on a tendon in a fraction of a second. That is the theory. We know that EMF causes oxidative stress, and we know that oxidative stress degrades collagen. The only thing missing is a study showing that direct connection. I have never claimed certainty that the substation is contributing to the elevated injury rate. I do believe it is likely, and I believe it warrants caution, and that a revenue machine like a major NFL team can easily afford to remove the exposure out of precaution. Is there a power plant next to the 49ers practice facility? Here is the clearest single instance of the problem with this episode. It requires no knowledge of electromagnetic fields at all. This story first came to me through Jon Feliciano, a former 49er, in an interview on Willard & Dibs on 95.7 The Game. Asked about why the 49ers are always injured, he said players used to joke that it was the power plant behind the practice fields. Wendy Zukerman corrects him on air. “It’s important to say that it’s not a power plant near the 49ers site.” Torre then asks her to explain the difference between a substation and a power plant. Her answer: a power plant generates electricity and transmits it to a substation, which converts the voltage into something your house can use and sends it on to your home or your business. There are two problems with that. The first is that there is a power plant on that site. The Gianera Generating Station is a natural-gas-fired peaker plant owned by Silicon Valley Power, and it has been there since 1986. I have published aerial photographs of the location from 1987 in which the gas plant is the only thing standing, before the practice facility was even there. I even mentioned the gas plant in my first interview. (Feliciano has since gone on record about this issue, and it is clear he had the substation in mind rather than the gas plant.) The second is that her definition describes a distribution substation, and the facility beside the 49ers is not that. It is the Northern Receiving Station, which takes in bulk power from outside the city’s grid and delivers it to distribution substations. Silicon Valley Power’s own map distinguishes receiving stations from substations, and Rose Rimler even reads the label out loud in the episode when she walks through that map on air. A few minutes before the map segment, Zukerman tells Torre: “like I said, we fact check everything.” Well, maybe not everything. I made a mistake On the morning of July 6th, at 10:20, I sent Rose and Wendy two studies. During the interview I had been asked which human studies show oxidative stress from electromagnetic fields, and I had not been able to name one on the spot. Rose emailed asking for the studies, I quickly searched for a couple, and I wrote that I thought these were the most relevant from that search. Unfortunately, I was busy and did not read either one closely at first. I picked them because they were topically relevant — one on substation workers, one on power plant workers. Neither were great studies, and their problems go past the ones raised in the episode. That was careless on my part. There is context that did not make the episode, though. Before that email I had been on a Zoom call with Rose talking about EMF and oxidative stress, and I pointed her to Dr. Henry Lai at the University of Washington, who has spent years aggregating the literature on this question. His tallies show that roughly 90% of studies since the late 1990s find oxidative effects from electromagnetic field exposure — hundreds of studies, systematically counted. Rose told me she was already aware of his work. So when she asked for studies, I understood her to have the aggregate view already and that she would report anything within that context. Not reading those two carefully was still a mistake, but the larger mistake was assuming the episode would be based on a thorough review of the actual body of literature, rather than on whatever I happened to send that morning. The second email At 1:49 that same afternoon — three hours and twenty-nine minutes after the first — I sent them a second email that I had been preparing for a while. It was a structured document in six numbered sections, written in response to a request they had made two weeks earlier, laying out my entire argument with citations attached to every link in the chain. The episode aired on August 13th, five weeks later, and not a single item from the second email is in it. Here is how it opens: The full email is included at the bottom of this post in Appendix B. Nearly 1,500 words in total. It contains two named mechanisms with the physics behind them. Occupational studies in humans. The literature on oxidative stress and collagen. A section addressing the strongest counter-evidence against my own theory, which I raised myself. And a closing section stating plainly what the theory cannot yet show. My entire argument, in writing, with detailed citations for every claim, provided to them five weeks before broadcast, and none of it made it into the episode. That is the single largest omission, but it is not an isolated one. The whole episode is riddled with similar problems, and the conclusion they came to is not merely a difference of opinion about the scientific evidence. Through omission and through strategic editing, Science Vs misinformed its audience — about what the evidence shows, about what I argued, and about who they spoke to. That is a notable outcome for a show whose stated purpose is correcting misinformation. For the record I am not going to tell you that Science Vs set out to discredit me, or that they had come to their conclusion before they reported the story, or that they used misleading editing to make me look like a man retreating from his own theory. I cannot know what was in anyone’s head, and I am not going to pretend otherwise, either. What I can tell you is what is on the record. They asked me for evidence and aired the weakest thing I sent. They interviewed three scientists who supported my theory and aired none of them. They discussed childhood leukemia without ever saying the exposure level at which it appears. And they took an answer I gave weeks before Ken Karipidis, the one EMF scientist who was put on air, was interviewed, and placed it directly after his critique, where it comes off as a major concession. A friend of mine who has worked as a journalist for thirty years read that last one and called it sleazy. I agree with her. Those are just the four issues that are impossible to defend as pure editorial decision, but they are not the only issues. The most glaring issues stem from what they left out: The exposure level at which the childhood leukemia association actually appears — three to four milligauss, a number the episode never states despite it being much lower than what I measured. The mechanism itself: The episode gets as far as “oxidative stress could weaken collagen,” which leaves it sounding like speculation, rather than a known pathway. The second email, and all the studies in it. Dr. Paul Héroux at McGill, whose work my proposed mechanism rests on, whose contact details I supplied, and who was never called. Dr. Beatrice Golomb at UC San Diego, who runs a research group on oxidative stress and mitochondrial function and has specific expdertice in collagen, interviewed and not aired. Dr. David Carpenter at Albany, the most prominent academic voice on the harm from magnetic field exposure, interviewed and not aired. Dr. Joel Moskowitz at Berkeley, interviewed and not even credited. The specific, testable condition I put in writing that would make me abandon the theory. My own unprompted statement of the theory’s evidentiary gap. My caveats about my own measurements. My ranking of EMF as one factor among several rather than the only one. The new equipment installed at those facilities between 2010 and 2014, and the sharp rise in system load from 2013 onward. But that is not all. What they kept, they selectively edited to serve a narrative that was not served by the raw transcripts of the interviews. A description of thousands of commercial routers in a workplace, reduced to the Wi-Fi in your house. My own acknowledgment, multiple times, that "I'm not a scientist" clipped in an episode that spends considerable energy pointing out that I am not a scientist. And a qualification I volunteered about my own measurements, cut from my answer and delivered later by their EMF expert as a correction. Together their edit produce a portrait of a wellness guy with Wi-Fi phobia and two bad studies, backing away from his theory the moment a “real” scientist looked at it. A practice facility where nothing changed because no new substation was built. Injuries written off as random because the 49ers were not quite the single most injured team in the league over the period in question. That portrait is false even though almost no individual statement made in the episode is. Draw your own conclusions At the top of the episode, Pablo Torre says his show had been flooded with requests to investigate the substation — that it was the thing they were asked to look into over and over again. Neither show went hunting for this story. It arrived from their own audience, in volume, and it could not be waved off. A thread I posted on X reached twenty-two million people. A guy with a gaussmeter and a brand-new Substack obligated a Pultizer prize winning program to spend an hour on a question about player health, that is considered fringe enough that most media operations won’t touch it. Pablo Torre Finds Out could not ignore it. So Science Vs came in and ran a “debunking” operation instead of an investigation. Everything below is what had to be left on the cutting room floor to deliver the “debunking”. They could not ignore it. So they tried debunked it instead. The demand was strong enough to force an episode, and since the episodes release the 49ers have sustained more injuries, including season ending ones, and interest has only grown. Demand from fans and playets is strong enough to force a better investigation from someone else. An omission is not a lie until you find out what was omitted. What follows is the detailed record so you can see the full picture. Draw your own conclusions. I have drawn mine. I am going to keep publishing. A note about Pablo Torre Finds Out After the episode aired I posted publicly, calling out Pablo Torre Finds Out for concerns I had about the integrity of their investigation, and about an interview directly with Pablo Torre which had been offered but never happened. I have since spoken with a producer at PTFO. The offer had rested on a misunderstanding about where things stood between us, and it fell away as the Science Vs part of the production widened past the science. He apologized for the miscommunication and I accepted. The producer also confirmed to me that they did essentially hand off the entire investigation to Science Vs for narrative purposes — so Pablo would be genuinely curious or potentially surprised by their findings — while still taking responsibility for what went out under their name. I appreciated the candor and the accountability, and I am comfortable with where we left things. So this post is not about PTFO. My disagreement is with Science Vs. What they left out about childhood leukemia Childhood leukemia appears at three milligauss. They gave no number at all. 1. They built an EMF ruler, then discussed childhood cancer without it. The sequence on air went like this: First I measured almost 9 mG, then I measured up to 50 milligauss. Torre reacts with concern — “that sounds high.” Cut to Karipidis: the public limit is 2,000 milligauss. Torre reacts again — “What happens at 2,000?” Karipidis explains that nothing happens at 2,000, that safety factors are built in. Then: at more than 50,000 milligauss you get flickers of light in the retina, and higher still, nerve stimulation. The listener now has a ruler (their ruler) to measure these numbers with. Fifty is nothing by their ruler. Then the episode turns to childhood leukemia and states, accurately, that there is a real association — but tellingly, they never give the exposure level at which that association appears. Childhood leukemia appears at three milligauss. They conveniently left that out. The pooled analyses that produced the World Health Organization’s carcinogen classification found roughly a doubling of childhood leukemia risk above three to four milligauss. That is the number that belongs in that segment, and it is more than ten times below the reading that had just been dismissed as trivial. I gave them that number myself, on tape, in the interview. Describing my own threshold, I said my comfort level for long-term chronic exposure is three to four milligauss, but preferably one. 2. Six children in thirteen million. The episode reports that these fields might explain one to four percent of childhood leukemias, then reframes it as a German estimate of perhaps six cases among thirteen million children. Torre, to his credit, is uncomfortable. What never gets explained is why that number is small. Almost no children lives above three milligauss in Europe. Fewer than two children in a hundred, in the Italian data. So even if the risk to those children doubles, the number of additional cases across an entire country stays small — not because the hazard is small, but because hardly anyone is exposed to it. Count the whole population and the few who are exposed disappear. And the reason hardly anyone is exposed is that siting rules keep housing away from transmission lines. In Europe, at least. The Dutch government has a standing precautionary policy against building new homes in any zone where the annual average magnetic field exceeds 4 milligauss — the same number the episode never mentioned. Denmark and Norway treat 4 milligauss as the level that triggers a look at mitigation. That is five hundred times below the ICNIRP figure quoted on air. The United States has no federal equivalent. That is evidence of infrastructure siting policy working. It is not evidence that there is no hazard. It is evidence that we already act as though there is one. If you listen to the raw audio you will hear that my proposed solution is EMF exposure is to build better infrastructure. What they left out about the mechanism 3. They accused me of cherry-picking, and then cherry-picked themselves. On air, Zukerman tells Torre that people who worry about electromagnetic fields dismiss the studies showing null results and collect the ones showing harm, and that this is why you have to be careful not to cherry-pick. They had two papers I had rattled off in a hurry, and a second email containing a carefully chosen set. They ran the two weakest, graded them on air, and presented the result as the state of the evidence for not only my theory, but the whole question of oxidative stress from magnetic fields. That is cherry-picking from my emails. The bigger picture is what they did with the literature as a whole. Zukerman acknowledges it exists, dismisses it, and disposes of it in a single stroke. You can go online right now, she tells Torre, and find scores of studies showing these fields increase oxidative stress. The issue, she says, is that they are not studies in people. Many of them are in people. The occupational studies in my second email are in people. That email had been in her inbox for five weeks. She waved off the literature on a factual claim that the documents in her possession contradict. (I have written separately about the evidentiary standard at work here). The effect was that they essentially baited me: ask the subject to supply the evidence, take the weakest thing he sends, and let that stand as a proxy for the whole argument. Wendy has been doing this show for ten years and clearly knows how to extract what she needs for her desired narrative. 4. They presented the collagen-improvement research as a gotcha, but I had already addressed it. The episode treats the existence of studies showing that EMF can improve collagen as a surprise that undercuts me, but I had pre-emptively addressed that five weeks earlier in the email they ignored. Those studies use measured, high-intensity pulsed dosing. The mechanism by which they work is oxidative signalling. The cell reads a controlled rise in reactive oxygen species as a warning, upregulates its antioxidant defenses, mounts a repair response, and the therapy stops before the system is overwhelmed. The key point is that it induces an oxidative response, which means those studies are actually evidence for my proposed mechanism, not against it. A field that produces a therapeutic effect cannot be biologically inert (which is the implication when they say “Nothing happens at 2,000 milligauss). Chronic ambient exposure is the same pathway with no off switch, and it is most consequential during the evening and while sleeping, when the body is in repair mode and the exposure does not stop. Section 5 of my email is titled What about the study showing improved collagen synthesis. I raised the counter-evidence myself, explained why I did not think it refuted the theory, and wrote that I was disappointed the question had not come up in the interview. That is worth holding against the cherry-picking charge in the item above: the studies they presented as inconvenient for me were studies I had gone out of my way to put in front of them. 5. Section 1 of my email stated a critical argument that was never put to the expert directly responsible for it. My email says the exposure limits exist to prevent acute effects and do not address chronic exposure at all, and that my dispute is with the entire framework. Zukerman gestures at this once. After Karipidis gives the 2,000 milligauss figure, she tells Torre that I would object because those levels do not capture “more subtle effects.” That is not my argument, and “subtle” is doing a lot of work here. My argument is that the limits are built to prevent acute effects — nerves firing, muscles twitching, etc — and were not designed to address chronic exposure at all. In fact, ICNIRP’s own documents state as much themselves. Mine is a structural objection to what the standard measures, reduced as a concern about subtlety, it becomes a matter of degree, rather than a categorical difference. They interviewed Ken Karipidis, vice chair of ICNIRP — the body that writes those limits. He was asked what the limit is, but he was never asked how it applies to chronic exposure. The scientists Science Vs interviewed and did not air 6. They interviewed four officials of the standards body. The episode credits roughly a dozen researchers. Four of them are associated with ICNIRP. Ken Karipidis is the vice chair. Rodney Croft chaired ICNIRP from 2020 to 2024 and led the development of its current guidelines. Dan Baaken is ICNIRP’s scientific secretary. Frank de Vocht sits on the Main Commission. One of them speaks in the episode. Their institution’s position is more than adequately represented — the 2,000 milligauss figure, the safety factors, the assurance that nothing happens below the line. 7. The four who were left out. Dr. Beatrice Golomb is Professor of Medicine at UC San Diego — a physics undergraduate degree, a PhD in biology, an MD. She directs a research group whose stated focus is the relationship between oxidative stress, mitochondrial function and health. That is the mechanism the episode spent its first half dismissing. Her published work includes the fluoroquinolone case series behind the FDA’s black box warning on an antibiotic class that ruptures tendons, where the accepted mechanism is oxidative stress and mitochondrial toxicity — the back half of my chain, already on a drug label. She is in the credits. She is not in the episode. She has told me she finds my theory biologically plausible, and that she has a recording of her interview. Dr. David Carpenter directed the Institute for Health and the Environment at the University at Albany for decades and is the most prominent academic voice arguing these fields cause harm. Childhood leukemia is the reason these fields carry a WHO classification at all, and Carpenter is the person you call if you want that case made by someone who has spent a career on it. He is in the credits. He is not in the episode. He has told me that when he was interviewed they could not have been less interested in what he had to say. Dr. Joel Moskowitz directs the Center for Family and Community Health at UC Berkeley’s School of Public Health. He told me directly that they interviewed him and that he thought it went well. He does not appear in the episode, and unlike Golomb and Carpenter, he does not even appear in the credits. Dr. Paul Héroux at McGill is the researcher whose work provides the foundation for the oxidative stress mechanism my theory rests on. I gave Rose his email address and phone number. He was never interviewed. They never even called him. 8. “He’s not a scientist.” The episode leans hard on the fact that I am not a credentialed scientist. Zukerman says it. Torre repeats it. “At all.” Having built a segment on that, they then left out the physicist-biologist-physician, the professor of public health, the director of a university environmental health institute, and the McGill researcher whose work the primary mechanism comes from. They spent the episode telling their audience I am not a scientist, and then kept four actual scientists who support the theory off because their argument does not survive otherwise. How they misrepresented me and my case 9. They played my words as a response to an interview I had never heard. Near the end of the hour, Zukerman says she went to me and told me the evidence was lacking. Then she plays me saying I am not wedded to it being an EMF, that I have staked my reputation on it needing more study, and that I am not certain of anything. That segment was placed immediately after Karipidis had finished taking the cherry-picked papers apart. It plays as a man folding under expert scrutiny. Commenters have used it against me since, but it is incorrect. Here is the sequence as it happened. I was interviewed. Karipidis was interviewed weeks later. I was never told what he said, or even who he was. I was never asked to respond to it. I did not know his name until the episode aired. That is not a simple editing decision. That is a quote from one interview, moved to follow a critique from a different interview it was not a response to, so that it would land as a concession. A friend of mine who has spent thirty years as a journalist read that sequence and called it sleazy. She is right. The full passage is reproduced in Appendix A, and it is worth reading. What airs is the preamble. Four paragraphs later I say “to directly answer your question” — and that answer, about what would change my mind if the team relocated, is not in the episode. Neither is the sentence two paragraphs on, where I say the EMF might turn out to be ten percent of the problem. I will say the underlying point again, though, because I meant it and I still do. I am not wedded to my theory that magnetic fields from the substation are contributing to the 49ers injuries. I could be wrong. What I am wedded to is the process of scientific inquiry, and the fact that we should be cautious around these exposures and we need more independently funded studies. 10. Three telling edits. They cut “I’m not a scientist” mid-sentence. What I said: “...and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS...” What aired: “...and that I am not certain of anything. I’m not.” The clip ends on the first two words of the sentence in which I say I am not a scientist, in an episode that spends considerable energy establishing that I am not a scientist. The full sequence is in Appendix A. They cut my own description of my work. Asked what I do, I said I run a wellness business, that I am focused on writing software to help people navigate environmental stressors, that environmental health is my focus, and that I also do independent journalism and research. What aired is the wellness business and the environmental health, with the software and the journalism removed from my own answer. The software engineering does come up later — narrated by them, as a hacker who grew up to write firmware — but my current work, in my own words, arrives as “wellness guy.” Thousands of commercial routers became home Wi-Fi. What I described: working at a wireless networking company surrounded by thousands of Wi-Fi routers, and a stress-induced health collapse afterward that working in that environment contributed to. What aired: Wi-Fi, the kind you have at home — reinforced by a clip of Christian McCaffrey talking about turning his router off at night. Three cuts, and every one of them makes me seem less credible. That is not a coincidence. 11. I gave them my own caveats and the test that would disprove me. In the first email I wrote that a well-designed chronic, ambient-level exposure study in tendon showing no collagen degradation, run over many months, would undercut my confidence in the theory. That is a specific, testable condition, stated in advance and in writing. There was a second interview, weeks later, which was not used in the episode, but in that I asked again for the falsification criterion to be included. What the episode presents instead is a man saying “we need more study,” which reads as a hedge, an open-ended request for the benefit of the doubt. It is the opposite of a hedge. Section 6 of my second email says, unprompted, that as far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human in vivo or in human tendon in a lab. I wrote that because it is true and because it is the first thing anyone should check. Under their standard it becomes the hinge of the entire first half, framed as something they had to surface without my cooperation. I had handed it to them five weeks earlier. And in the interview I said that my 25 to 50 milligauss readings were taken at knee level, and that these fields attenuate quickly, so by the time it reaches your head it is not that high anymore. That did not air either. The qualification arrives later, from Karipidis, as a correction. How you would actually study the injuries 12. They measured the wrong thing. The episode spends its final act on whether the 49ers are the most injured team in the NFL, finds no clean ranking, and lands on “injuries are random”. That is the wrong test. You would define the exposure — measured field levels at the facility — and the outcome narrowly: soft-tissue injuries, not a single MSK injury count that a broken finger and a ruptured Achilles both land in. Then you would compare the 49ers to themselves before and after the exposure changed, and compare that change against every other team over the same window. That controls for league-wide shifts in rules, turf and training load. It is a difference-in-differences design, and it is standard. I sent them that argument on July 28th, in writing, along with the fact that in eleven of the past twelve seasons the 49ers had finished top ten in Adjusted Games Lost. And by the episode’s own reporting, the 49ers are second in games lost to injury over the past decade, with FTN’s Aaron Schatz confirming that once you adjust for starters they come out second worst in the league — after having been one of the healthiest teams for years before that. A finding like that is where an investigation starts, not where it stops. 13. I did a lot of substation research for the episode that was never aired. I had reported that the substation next to the facility was expanded in 2014. That was wrong, and Rose Rimler and I sorted it out together. They gave me credit on air, which I appreciated, but framed it as a concession on my part to something they had found. In fact I had been investigating it myself, was uncertain before they asked, but was waiting for clarification from Silicon Valley Power. The uncertainty centered around a substation named “Esparanca” that was proposed right behind the facilities as part of the stadium construction, but now appears to never have been built. I spent days in Silicon Valley Power’s records, and did eventually reach Silicon Valley Power for confirmation and indentified the mistake myself. I also gave them highly detailed documents on what we do know about those facilities: new equipment installed between 2010 and 2014, and load growth across the system with an inflection around 2013–2014, with the Northern Receiving Station carrying the highest capacity in the system and sitting closest to the data center corridor. None of that is in the episode. I have a separate piece about it coming out soon. *I cut 2 seconds from the raw audio to remove personal information that had no connection to anything in the episode. Appendix A: the passage the clip was taken from This is the sequence from my first interview, in full. The episode uses one fragment of it. It’s tricky because my understanding is that there’s something like a 15-year half-life on collagen remodeling issues. They’re going to get a new crop of players. What I really need, though, is for the injuries to be broken down so we can see the soft tissue injuries. Right now, they’re categorized as MSK injuries, but let’s say we can actually identify them more specifically. Is that right? He was able to do that? Oh, cool. I wasn’t able to find that information. Interesting — I didn’t know that data existed. I tried so hard to get it, and I didn’t know it was available. Maybe you could connect me with that person. That would be amazing. I’m not wedded to it being an EMF, honestly. I’m not. I would say that, to a certain extent, I’ve staked my reputation on the fact that it needs more study. It’s important to look into it, and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS, Ehlers-Danlos Syndrome, a tendon hypermobility issue. This condition is documented to be partially caused by oxidative stress. I’ve worked with them to mitigate their EMF exposure and have seen people improve. I think it’s a bigger story. In a way, the 49ers represent an occupational cluster with specific exposure risks. If someone would conduct a study on this, I believe we could learn a lot. Perhaps we would discover that it’s like, okay, maybe it’s 10% of the problem. I don’t know the exact number, but I think either way, conducting the study would provide valuable insights. To directly answer your question, it’s challenging for me because it’s part of a bigger story. If the 49ers move and stop having injuries, I might conclude that it was related to the substation. However, if they move and still experience injuries, I would want to analyze the nature of those injuries. Are they primarily soft tissue injuries? I don’t think it’s necessarily a case closed, but the story might lose traction at that point regardless. Three things are worth noting. The aired fragment stops immediately before the sentence in which I say I am not a scientist — the cut described in item 10. It also stops four paragraphs before the words “to directly answer your question.” What the episode plays is the throat-clearing. The actual answer, about what would change my mind, never airs. And two paragraphs in, I say the EMF might turn out to be ten percent of the problem. That is the ranking the episode says I never gave. Appendix B: the full email, July 6th, 1:39 PM Hi Rose, You asked me to send you some studies a couple of weeks ago. I apologize for the delay. I have been incredibly busy. I also wanted to give you a chance to dig in yourself, and get your own perspective before I influenced you too much with mine. That said, I do want to make sure that the actual argument is abundantly clear, so here it is! One note before I begin, there are really two separate questions here: Does the substation cause the soft-tissue injuries? That was my specific claim, and what the podcast is about. Is the theory biologically sound? Can 50/60 Hz fields at these levels do anything biological below the safety limits? Question two is why people have been calling me a conspiracy theorist. The regulatory and advisory bodies (ICNIRP, etc) maintain that anything below their exposure limits is biologically inert, and that position is broadly accepted within the mainstream, but the actual science paints a different picture. To defend my theory I’ve had to defend a much larger claim: that the advisory bodies have the biology wrong. I can’t honestly answer question 1 without first addressing that. Here’s is a simplified outline of my theory, with links to studies: 1. Advisory body thresholds for biological effects The ELF magnetic-field limits (ICNIRP’s ~2,000 mG public / 10,000 mG occupational) exist to prevent acute effects from exposure. If a magnetic field is strong enough, it makes nerves fire and muscles contract. Muscles twitch. You can see faint flashes of light in your vision. People can even feel tingling or even a shock. That happens due to Faraday’s law, which states that a time-varying magnetic field induces an electric field inside the body via the creation of Eddy currents.The standards assume that those currents do nothing below the twitch threshold. They do not consider chronic effects at all. My argument is that they are biologically active and do have chronic effects. 2. There are multipe ELF-EMF mechanisms for inducing oxidative stress. This is basic biophysics. Below are the two primary mechanisms. Simplest first. Dr. Paul Héroux of McGill has the most intuitive explanation, which rests on Maxwell’s principle of superposition: because Maxwell’s equations are linear, two sets of electromagnetic waves sharing the same space simply add together. In the interview I pictured a pebble dropped into a pond, sending out clean ripples. Then a boat motors past at distance, sending larger waves, and where they meet the ripples, the two add together and the original pattern gets distorted. In our cells, the mitochondria run on continuous currents of electrons and protons that carry their own faint electromagnetic fields. An external field from a substation, by the principle of superposition, adds to those internal currents and shifts the pattern. The electron transport chain in the mitochondria leaks a fraction of its electrons by design as reactive oxygen species (ROS), which act as signalling molecules in a healthy cell. Distorting that field increases that electron leakage, creating oxidative stress. A tiny electromagnetic interference results in a large downstream effect. https://www.sciencedirect.com/science/article/pii/S2405844025006474 The more complex pathway is Dimitris Panagopoulos’s Ion Forced-Oscillation / Voltage-Gated Ion Channel (IFO-VGIC) mechanism. Weak, polarized, low-frequency fields force the ions (calcium, potassium, sodium) next to an ion channel’s voltage sensor to oscillate; because that force scales with the inverse cube of the distance involved, fields far below the stimulation threshold can still force the channel open, disrupting the cell’s ion balance and driving ROS overproduction (Nitric oxide and superoxide interact and produce peroxynitrite, a highly unstable cytotoxin that breaks down into free radicals). https://www.researchgate.net/publication/366088934 https://www.spandidos-publications.com/ijo/59/5/92 https://www.mdpi.com/1422-0067/22/18/10041 https://www.frontiersin.org/journals/public-health/articles/10.3389/fpubh.2025.1585441/full https://pmc.ncbi.nlm.nih.gov/articles/PMC3772193/ 3. Evidence of oxidative stress, in vivo, in humans from ELF-EMF There are many studies, and the strongest are occupational, which applies to the 49ers situation. 115 power-plant workers vs. 145 office controls. Serum malondialdehyde (MDA, the standard lipid-peroxidation marker), superoxide dismutase, and catalase were all significantly higher in the exposed group, and the markers rose with increasing field exposure. https://journals.sagepub.com/doi/abs/10.3233/WOR-203244 A follow-up where they reversed the oxidative stress in power plant workers. A double-blind randomized controlled trial: 91 power-plant workers given vitamin E, vitamin C, both, or placebo for 90 days. The antioxidant groups showed reduced lipid peroxidation and raised antioxidant capacity versus controls. https://pubmed.ncbi.nlm.nih.gov/32191586/ A spot-welder study: 46 welders occupationally exposed at 50 Hz, showed significantly altered red-blood-cell antioxidant enzyme activity and concluded ELF-MF “might act as an oxidative stressor… even at the recommended levels of exposure.” https://pubmed.ncbi.nlm.nih.gov/18504600/ A substation-specific study found oxidative stress and DNA damage https://pubmed.ncbi.nlm.nih.gov/24460415/ 4. Oxidative stress degrades collagen This half isn’t controversial at all. Oxidative stress activates the matrix metalloproteinases (MMPs) that break collagen down and suppresses its synthesis. Here are three example studies: Siwik et al. 2001: Oxidative stress raises MMPs and lowers collagen synthesis in cardiac fibroblasts. https://pubmed.ncbi.nlm.nih.gov/11121376/ Fisher et al. 2009: Collagen fragmentation drives oxidative stress and elevates MMP-1 in aged human skin. https://pmc.ncbi.nlm.nih.gov/articles/PMC2631323/ Varani et al. 2006: Decreased collagen production in oxidatively aged skin. https://pubmed.ncbi.nlm.nih.gov/16723701/ 5. What about the study showing improved collagen synthesis I’m glad you asked this question, and I’m bummed we didn’t get to it in the interview because it is a great question, and very important to understand. Superficially it may appear to be a refutation of my theory, but I would argue that it actually supports the underlying argument. That study used a short, high-intensity pulsed dose: therapeutic-PEMF, the same type of field used clinically to stimulate bone and tissue healing. The reason this works is because it triggers the very same biological pathways that can lead to oxidative stress. The exposure still stimulates ROS production, but done at a controlled dosage, for a limited duration it has a different effect. The cell reads the ROS as a warning signal and it upregulates its antioxidant defenses, and mounts a repair/proliferation response. The therapy is then stopped before the cell gets overwhelmed. That is essentially a hormetic response: a small dose of a stressor producing a beneficial adaptation. Two things follow: At the very least, this means the field is biologically active, which by itself undercuts the regulatory claim that these fields are inert below their thresholds. There is a wealth of literature on PEMF (pulsed EMF) bone regeneration and calcium channel signalling (which is the second mechanims in section one). Here is one. https://www.nature.com/articles/srep13856 At best, it leads us straight to my actual concern, which is that under chronic, chaotic and unregulated exposure, the cell’s antioxidant capacity gets overwhelmed, resulting in oxidative stress. There are plentiful examples of things that are beneficial at controlled doses, but harmful at uncontrolled doses. Excecise is one obvious, uncontroversial example. Botox is perhaps a more interesting example. 6. What about a study that shows EMF causing collagen degradation in humans? As far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human, in vivo, or in human tendon in a lab. There are studies involving isolated fibroblasts though, which secrete collagen. The most relevant one showed that human fetal scleral fibroblasts exposed to 50 Hz ELF-EMF showed a significant decrease in collagen synthesis and that MMP-2 expression was upregulated, which is the exact mechanism I described in section 2. https://pmc.ncbi.nlm.nih.gov/articles/PMC3626379/ That’s it! Thanks again for the interview. Best, Peter Anthony Cowan Environmental Health · Wellness Tech · Researcher & Journalist Publisher & Editor, Living Energy Bio: petercowan.comSocial: X · Instagram · TikTokApp: sunlightis.lifePhone: [redacted]
Trump administration doles out $16.8M for healthcare tech in rural Kansas
Rural healthcare in Kansas will benefit from nearly $17 million in federal dollars to expand technology such as telehealth, artificial intelligence and diagnostic tools, and expedite transportation to specialty healthcare.
University of Arkansas wins intermodal association challenge
The Intermodal Association of North America, the Calverton, Md.-based trade group representing the interests of the intermodal freight transportation industry, said the University of Arkansas won the association’s 2026 Academic...
U.S. 17 Corridor Improvements Project begins in North Myrtle Beach, business worries for impacts
Work has begun on the South Carolina Department of Transportation’s U.S. 17 Corridor Improvements Project.
Buttigieg: Democrats Need to Get Serious About Amending the Constitution
The former transportation secretary spoke with The Atlantic’s editor in chief about what comes next for Democrats should they win big in November.
Final stretch: Science Hill JROTC nears $25,000 fundraising goal
Science Hill High School's Army JROTC program has raised about $21,096 toward a $25,000 fundraising goal, with 11 days remaining in its campaign as of Thursday afternoon. The program is also seeking a 10 to 15 passenger van to help transport cadets to competitions and community events.
Input costs, transportation expenses drive uncertainty for manufacturers
Manufacturers are growing more optimistic about sales and production over the coming year, but rising input costs, transportation expenses and continued global uncertainty are keeping pressure on the sector, according to a new survey from the National Association of Manufacturers. NAM’s Q3 2026 Manufacturers’ Outlook Survey found that manufacturers expect raw material and other input […]
Oregon DOJ convicts multiple business owners of Medicaid fraud
BEND, Ore. (KTVZ) -- Oregon Attorney General Dan Rayfield announced a series of Medicaid fraud enforcement actions from the Oregon Department of Justice's Medicaid Fraud Control Unit (MFCU), involving non-emergency transportation companies and a mental health care provider. The cases include guilty pleas from the transportation business owners and a grand jury indictment against the
Scania launches Venture & New Business China to accelerate future transport solutions
Scania is launching Venture & New Business China (VNBC), a dedicated platform to identify, develop and pilot new business opportunities in China through strategic partnerships, customer collaborations and new ventures. Kelly Fu has been appointed Regional Lead for China Venture & New Business, Scania Group.
Sphere Entertainment (SPHR) Following Lyft Deal Has Its Valuation Back In Focus
Sphere Entertainment (SPHR) just signed a multi-year marketing deal with Lyft that makes the rideshare service the official partner across its venues, highlighting how transportation partnerships can shape the broader entertainment ecosystem. Sphere Entertainment’s recent Lyft tie-up lands at a time when momentum has cooled in the short term but remains strong over a longer horizon. The share price is down 15.8% over the past month, while the year-to-date share price return is 53.2% and the...
Leaders discuss challenges for Latino communities at the State of the Union on Latino Health
The State of the Union on Latino Health brought together leaders in Pennsylvania to address challenges such as health inequality, housing, and transportation for Hispanic communities.
J.B. Hunt expects higher costs to reduce Q3 earnings
Lowell-based J.B. Hunt Transport Services Inc. recently offered a “rare” intra-quarter peek into its third-quarter earnings and expects earnings to fall 5% to 10% from the second quarter because of...
Afognak Acquires Weaver Bros. Family of Trucking Companies
Afognak Commercial Group acquired a majority interest in the Weaver Bros., Doyle’s Fuel Service, and Doyle Transport family of companies.
'Science fiction': Transport companies — the backbone of economy — are sounding alarm on fuel prices
Prices for diesel, the fuel type used to power trucks and trains, came in at an all-time high of $6.31 per gallon on Wednesday.
Mercy Health to partner with American Red Cross for blood drive; Rebuild Mayfield project to improve downtown roadways
Mercy Health will hold a blood drive from 7 a.m. to 4 p.m. on Wednesday. And the Kentucky Transportation Cabinet held a public information meeting Tuesday to provide updates on
New businesses: Fresno County fictitious business name filings
See the latest Fresno County fictitious business name filings, including restaurants, farms, transportation, health and service businesses.
4,000-year-old letter finally read by scientists, but left unopened
ENCI is a portable, high-definition CT scanner device that can easily be disassembled for transport.
Back to School, Back to Health: Helping Imperial Valley Families Prepare
Written by Sergio Uriarte. Last Updated September 15, 2026 in Healthcare. EL CENTRO — A new school year brings plenty for families to manage: supplies, schedules, transportation, forms and after-school activities. It’s also a
Runaway Athletics Spending Threatens the Financial Health of America’s Colleges, Cantwell Snapshot Report Shows - U.S. Senate Committee on Commerce, Science, & Transportation
Today, U.S. Senator Maria Cantwell (D-Wash.), Ranking Member of the Senate Committee on Commerce, Science and Transportation, released a new snapshot report on how runaway athletics spending is harming the financial health and broader missions of U.S. colleges and universities – and hitting students with record-high fees.
Senate Overwhelmingly Supports Consideration of Protect College Sports Act Following Event with Student Athletes and Coaches - U.S. Senate Committee on Commerce, Science, & Transportation
To watch Chairman Cruz’s remarks on the Senate floor, click HERE WASHINGTON, D.C. – Today, with a vote of 74-24, the Senate cleared a key procedural hurdle to move to consideration of the Protect College Sports Act (S.4668), setting the stage for the bill to move through the Senate. Senate Commerce Committee Chairman Ted Cruz (R-Texas), the […]
Markel International bolsters leadership in new Marine Transportation business with two key appointments
/PRNewswire/ -- Markel Insurance, the insurance operation within Markel Group Inc. (NYSE: MKL), today announced the appointment of Dean Johnson to Head of...
Next governor should fix dysfunctional CU Board of Regents
Earlier this year, the governor and state legislature finally agreed to revamp the board of directors at the Regional Transportation District, downsizing the board while adding appointed members (Polis signs RTD overhaul bill aimed at rebuilding transit ridership, Colorado Politics, May 27). Hopefully the state’s next governor will convince the legislature to fix another problematic […]
Record diesel prices strain local transport business
The average price of diesel hit a record $6.23 per gallon Monday.
Record diesel prices strain local transport business
The average price of diesel hit a record $6.23 per gallon Monday.
Baton Rouge transportation and delivery business acquired by Sulphur company
First Choice Couriers LLC has acquired Baton Rouge-based Total Delivery and Logistics in a move that will expand the Sulphur-based company’s operations and service capabilities in Baton Rouge and Ne… Already an INSIDER? Sign in. Already an INSIDER? Sign in