SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " cumulative " 41 found 🔀 AI-powered Shuffle
Burning through Türkiye's GDP: The high cost of fossil fuel PM2.5 pollution on public health – Centre for Research on Energy and Clean Air
Türkiye’s reliance on fossil fuels is generating massive air pollution health costs both within the country and throughout the region. This report finds that fossil fuels account for more than half (52%) of Türkiye’s population exposure to PM2.5 air pollution. The cumulative health impacts are estimated to cost the Turkish economy approximately USD 55 billion each year, equivalent to 4.1% of national GDP in 2024. The pollution is also responsible for roughly 26,500 deaths per year in the country, including deaths from cardiovascular and respiratory diseases, lung cancer, stroke, and diabetes.The impacts begin at the very start of life, with fossil-fuel-derived PM2.5 pollution contributing to an estimated 8,000 preterm births, 8,200 low-birthweight infants, 5,100 new cases of childhood asthma, and 6,500 emergency-room visits for asthma each year in Türkiye.Beyond the estimated deaths each year in Türkiye, air pollution from the country’s fossil fuel emissions also contributes to deaths and economic losses in neighbouring countries. In 2024, these emissions were estimated to cause: 32,000 deaths and USD 2.1 billion in economic burden in Egypt; 1,700 deaths and USD 0.2 billion in economic burden in Syria; 800 deaths and USD 0.8 billion in economic burden in Iraq; 500 deaths and USD 4.5 billion in economic burden in Israel; and 400 deaths and USD 1.5 billion in economic burden in Greece.Türkiye currently has no national ambient air-quality standard for PM2.5, despite the substantial health burden associated with exposure to the pollutant. Figure — The percentage of annual PM2.5 emissions in Türkiye’s fossil fuel emissions, using the EMEP emission inventory and EMEP MSC-W chemical transport model Key findings Türkiye’s fossil fuel emissions (from domestic sources as well as international aviation and shipping) account for 52% of population exposure to PM₂.₅ nationwide. PM2.5 pollution attributable to Türkiye’s fossil fuel use is responsible for approximately 26,500 deaths in the country every year, including deaths from cardiovascular and respiratory diseases, lung cancer, stroke, and diabetes. Children are among the most affected, with fossil fuel-derived PM2.5 pollution contributing to an estimated 8,000 preterm births, 8,200 low-birth-weight infants, 5,100 new cases of childhood asthma and 6,500 emergency room visits for asthma each year. The cumulative health impacts of fossil fuel-derived PM2.5 pollution are estimated to cost the Turkish economy approximately USD 55 billion each year, equivalent to 4.1% of national GDP in 2024. Transboundary pollution attributable to Türkiye’s land-based fossil fuel emissions also leads to thousands of deaths in five neighbouring countries, with estimated economic burden per year (as of 2024) reaching USD 2.1 billion in Egypt (3,200 deaths), USD 0.2 billion in Syria (1,700 deaths), USD 0.8 billion in Iraq (800 deaths), USD 4.5 billion in Israel (500 deaths), and USD 1.5 billion in Greece (400 deaths). Türkiye currently has no national ambient air quality standard for PM2.5, despite the substantial health burden associated with exposure to the pollutant. Reducing fossil fuel use and emissions across Türkiye’s energy, transport and industrial systems would deliver substantial air quality and public health benefits by reducing exposure to PM2.5 and preventing associated illness and deaths. Figure — Annual deaths attributable to Türkiye’s land-based fossil fuel emissions in the five most affected countries, based on 2024 emissions
The science, instinct and hard work behind Roosters’ success
Enter your email address to get each Tribune edition sent to your inbox Subscribe There’s a fair bit of unseen work that goes into winning an NRL premiership, dating back many months - just ask Simon Jones. The Sydney Roosters Head of Performance, who hails from Southland, has been in the thick of it. He played a lead role in guiding the 2026 champions through a marathon campaign that ended with a grand final win over the Newcastle Knights. The Roosters had to navigate the lengthy round-robin competition, including the pre-season, before playing through all four weeks of the finals series. It was a demanding stretch that tested the players and the staff responsible for keeping them on the field. “It is a hell of a beast, mate, to be honest,” Jones told The Roar Podcast. “There’s such a great group of staff there that know what they’re doing, and the boys are pretty professional.” Jones believed the Roosters managed the physical demands well, pointing to the health of the squad throughout the campaign and the decision to rest a significant portion of the playing group in the final round of the regular season. That call, made by head coach Trent Robinson and his coaching staff, proved valuable as the Roosters entered the finals with some energy in reserve. “We did finish the season physically where we needed to be, and we’d sort of had a pretty healthy squad all year,” Jones said. “To the team that do that, mate, mission accomplished, really.” It is the sort of work that often goes unnoticed when the spotlight falls on the players scoring tries and making match-winning plays, but Jones knows the cumulative effect of those decisions can be significant over a long season. After a win over Penrith had helped establish them as premiership favourites, losses to the Wests Tigers and Dolphins were followed by a defeat to the Panthers in the opening week of the finals. Rather than panic, the club refocused to position itself to challenge for the title. “The Tigers’ performance was probably the only one where you’re really quite disappointed because it’s hard to get to the top of the competition,” Jones told The Roar Podcast. “We had proof that we could; we knew what we needed to do. We just had to get back to that.” For Jones, the answer was not necessarily a radical change to the programme. It was about executing the basics consistently, both on the field and in preparation. “We just do the basics better than anybody else,” he said. “Whether that is actually the way you play the game or how you’re preparing, it’s just be really consistent, do the basics really, really well.” Like many professional sports teams, the Roosters are entrenched in sports science and performance data. The club has access to a range of information, including players’ sleep, GPS metrics and neuromuscular scores, helping staff assess how individuals are coping with training and competition. “We are very science-backed, and some people would say data-driven, but it’s people first,” he said. “The reason you collect all this data is to try and be the best for that person.” Jones said the club was also prepared to reconsider testing methods if they were not generating useful discussions or helping staff make better decisions. In an environment where technology is continually evolving, he believes experience and gut instinct remain important. “The data is no good unless you have conversations,” he said. “When you strip it right back, mate, trust the gut still and obviously, you know, just doing the basics really, really well.” The return of halfback Sam Walker provided a further example of the importance of individual determination and the work of the club’s medical team. Walker underwent ankle surgery late in the regular season, with his premiership campaign appearing in doubt. However, he was determined to return for the preliminary final. Jones said Walker was back at the training ground three days after surgery, walking freely enough to surprise those around him. While the surgeon’s work was crucial, Jones credited the halfback’s mindset as a major factor in the remarkable turnaround. “He was quite clear with Robbo after he got the surgery that he was going to make it back for the prelim finals,” Jones said. The Roosters’ performance programme also sits within a wider club culture that Jones believes is central to their success. Each season, players develop their own team mantra through a lengthy process facilitated by Robinson. It provides principles that the squad can connect to its actions on the field. Rather than simply carrying over the previous year’s wording after a successful campaign, the club repeats the process because the players’ ownership of it is what gives it meaning. “When it’s led, player-owned and player-led, mate, it’s really powerful,” Jones said. Get more from Logan Savory in the Substack app Available for iOS and Android Get the app Jones joined the Roosters in 2024 and said the environment had evolved as experienced players departed and younger members of the squad took on greater responsibility. Maintaining continuity in the club’s culture and preparation had helped the group navigate those changes. The premiership was a significant achievement for Jones, who acknowledged how difficult it was to win the NRL’s ultimate prize. However, he is already looking at how the performance programme can improve. “There’s still things within my role and things that I’d like to help improve at the club,” he said. For Jones and his team, the challenge now is to review the season, refine their systems and prepare for another campaign. The celebrations may have followed a memorable title win, but the work behind the scenes never really stops. The Southland Tribune is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
[NAC] FNCS Solos Qualifiers in NA Central: Qualifier 1 Day 1 Round 1
Drop into the FNCS Solos! The competition kicks off with Round 1, featuring two three-hour sessions—Day 1 and Day 2—with up to 11 matches per session. Eligible players must rank within the top 200,000 on the overall Power Rankings Leaderboard. Players ranked in the top 2,000 may skip Round 1 and automatically qualify for Round 2; however, choosing to compete in Round 1 forfeits that automatic qualification. After both Round 1 sessions conclude, scores from Day 1 and Day 2 will be combined. The top players on the cumulative leaderboard will advance to Round 2: Top 8,000 EU; Top 4,000 NAC; and Top 2,000 OCE, ASIA, ME, BR, and NAW. Round 2 consists of one three-hour session with up to 11 matches. At the end of the session, the top 1,000 players in each region will advance to Round 3. Round 3 also features one three-hour session with up to 11 matches. In Qualifier 1, the top 100 players on the Round 3 leaderboard will advance to Fast Track. In Qualifier 2, the top 108 players will advance to Heats. Good luck and have fun!
HEALTH AND FITNESS: This is your brain on football
Football season is underway, much to the delight of professional, college and high school fans. Football has also been in the news for another more serious reason – the association with brain injury. Over the years, it has been reported that several former NFL players suffered from brain injury because of concussions sustained over years of playing. Some players have even retired early in their careers to avoid such injury. Recently reported research suggests that this brain damage may start earlier and be the result of cumulative “minor” injuries rather than a single major trauma.
Environmental Justice Index: Find communities facing cumulative health effects of place and space
The Environmental Justice Index offers reporters a way to find communities where environmental hazards, social and health risks overlap.
Kono’s flawless Round 3 buoys Nebraska women’s golf at Ram Classic
Nebraska women’s golf played Monday and Tuesday in the Ben Connell Ram Classic hosted by Colorado State University at Ptarmigan Country Club in Fort Collins. The tournament marked the Huskers’ second outing of the season after they hit the links at The Bruzzy in Texas earlier this month. The two-day, 54-hole event welcomed 76 golfers from 13 schools that included: Washington, San Diego State, Washington State, UC Davis, Cal Poly, Wyoming, Hawaii, Southern Miss, Nevada, Northern Colorado, Colorado State and the event’s winner, UNLV, which managed to pull away from the competition with a 15-stroke victory at a cumulative 19-under par.
Situation Report No.11: Earthquakes in Venezuela 2026 (M7.2 and M7.5)
Nearly three months after the 24 June 2026 earthquakes in Venezuela, the response has moved into early recovery while sustaining essential emergency operations. Efforts now center on maintaining continuity of care across mental health, sexual and reproductive health, maternal and neonatal care, NCDs, and rehabilitation, alongside restoring affected facilities, supporting transitional camps, and strengthening Health Cluster coordination as Emergency Medical Teams and international partners withdraw. Health system recovery is advancing, with 16 ASICs and 356 health facilities assessed (61% operational) and rehabilitation progressing under CERF, CFE and US funding, while fluctuating electricity, medication refrigeration and emergency-generator gaps continue to challenge the safe continuity of essential health services. Public health surveillance and prevention remain active, with 47,145 cumulative vaccine doses administered and 556 health professionals trained, while intensified surveillance in La Guaira and Miranda and mounting environmental risks from tropical rains and heatwaves continue to require sustained vector-control and water/sanitation action. Contraception remains the most consistent unmet need across assessed shelters, particularly among adolescents and young women, while mental health needs continue to rise across the transitional camps amid limited supplies and specialized personnel. PAHO/WHO continues to support the response with critically needed medical supplies and medicines, having shipped 46.6 metric tons to Venezuela to date, benefiting 72 actors and reaching 117,714 people with treatment through PAHO and partner donations, while sustained technical and logistical support to the Ministry of Popular Power for Health (MPPS) has strengthened the national supply chain and ensured the continuity of health services through the coordination, reception, and mobilization of international donations of essential medical products.
Ebola outbreak update: Cases and deaths; Dungu health zone, Haut-Uélé province now affected
A total of 73 new confirmed cases of Ebola Virus Disease (EVD) were reported on September 18, 2026, including 25 community deaths. Of these confirmed cases, 46 were from Ituri province, 18 from North Kivu, 6 from Haut-Uélé, and 3 from Tshopo. A new health zone, Dungu, in Haut-Uélé province, was affected during the day. As this zone borders South Sudan, strengthening cross-border surveillance is necessary. During the day on September 18, 2026, 12 deaths within Ebola Treatment Centers (ETCs)—10 in Ituri and 2 in North Kivu—were unfortunately recorded, bringing the total number of deaths for the day to 37. However, 41 patients were declared recovered (30 in Ituri, 6 in Haut-Uélé, 3 in North Kivu, and 2 in Tshopo) after testing negative for EVD twice. Since the start of the epidemic in the Democratic Republic of the Congo (DRC), a cumulative total of 7,614 confirmed cases, including 3,676 deaths, has been recorded, representing a case fatality rate of 48.3%. The epicenter remains Ituri province, which accounts for 77.2% of the confirmed cases reported across the seven affected provinces and also accounts for 63.0% of the new confirmed cases. A new health zone was affected on September 18, 2026. Consequently, 63 out of 167 health zones (37.7%) across 7 provinces are affected. Subscribe to Outbreak News TV on YouTube Response measures feature 97% traveler screening at entry points, surveillance expansion to new area Dungu, and community outreach sensitizing over 110,000 people in one day. The Democratic Republic of the Congo’s health system faces deep, structural constraints that predate the current Ebola outbreak and make epidemic response far harder. These problems are most acute in rural areas and the conflict-affected east. Outbreak News Today is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe Eastern provinces have seen health facilities damaged, looted, or abandoned. Insecurity delays patients, blocks supply deliveries, and exposes staff to attacks. Millions of displaced people live in camps with poor water, sanitation, and health services, increasing outbreak risk. Vast distances and poor roads mean many people walk hours or days to reach care. These same weaknesses explain why Ebola has continued to spread into new, under-prepared health zones even as some original hotspots show improvement: surveillance, laboratory turnaround, contact tracing, and infection control remain thin outside the best-supported sites. The Ministry of Health and partners have scaled up treatment centres, laboratories, and vaccination in the current outbreak, and some digital surveillance systems (DHIS2) provide a useful backbone. However, the underlying gaps in staffing, basic infrastructure, reliable funding, and logistics have not been closed. Without sustained investment in those foundations, the system will remain vulnerable to both routine disease burden and the next large outbreak. If you like the reporting on Outbreak News Today, please consider a paid subscription for $5/month or $30 a year. Help support the cause of this niche journalism. It is appreciated.
NREMT launches study to track long-term health effects of fire, EMS careers
A multi-disciplinary team of researchers will study the cumulative effects of harmful exposures, workplace violence, injuries and psychological stress on firefighters and EMS providers
County receives three proposals for data center health study
Multiple firms submitted proposals to conduct a study for Lackawanna County attempting to quantify the potential cumulative health and air quality impacts of proposed data center development here.
Cosmos Health Secures Additional 2.5 Million Units Under New Five-Year Contract Manufacturing Agreement with Viofar; Total Orderbook Surpasses 27.5 Million Units
* 500,000 contracted units of ROSARTIA annually / 2.5 million over five years through a new long-term agreement at wholly owned subsidiary Cana Laboratories * Expands Cosmos Health's manufacturing presence in cardiovascular pharmaceuticals, adding production of statin-based lipid-lowering therapies to Cana's growing contract manufacturing portfolio * Cumulative contract manufacturing orderbook increases to more than 27.
Fact check: Trump, RFK Jr. and others make false claims on night 2 of GOP convention
(CNN) — President Donald Trump delivered another rapid-fire series of false claims on the second night of Republicans’ midterm convention on Thursday. Health Secretary Robert F. Kennedy Jr. did his own barrage of wrongness. And various other speakers uttered statements that were untrue, misleading or missing critical context.Here is a fact check of some of the assertions from the final day of the convention. This is not intended as a comprehensive list of Thursday’s falsehoods.Trump’s many false claimsTrump made numerous false claims, some of which he also made in his longer speech Wednesday.Trump claimed that there were “no empty seats” in the Dallas arena as he spoke Thursday, which was visibly untrue. CNN White House correspondent Alayna Treene, who was there, wrote in a live chat right after Trump made the claim that “I’m looking at rows of empty seats” and that “the idea that there are ‘no empty seats’ is just laughably untrue,” though she also said the room was mostly full. Trump has for years made false claims about supposedly never having had an empty seat.Trump further inflated one of his favorite fictional figures, claiming Thursday that “$22 trillion” in investment has come into the US; on Wednesday, he had put it at “over $20 trillion,” and even that lower figure has no apparent basis in reality. As of the time he spoke Thursday, the White House’s own website claimed there had been “$11.2 trillion” in “major investment announcements” this term, not “over $20 trillion,” and the White House figure was itself a major exaggeration of actual investment.Trump, talking about elections, lied that “there’s never been bigger cheaters” than Democrats; there is no basis for broadly describing Democrats as election cheaters. For the second straight night, Trump falsely claimed that the Biden administration allowed “25 million people” to pour into the country, though that number is nowhere close to correct. Trump again falsely claimed that former President Joe Biden and other Democrats “created the worst inflation in American history,” though even peak Biden-era inflation, 9.1% in June 2022, was far from the all-time record of 23.7%; it was a 40-year high, but the rate then fell sharply before Trump returned to office.Trump also baselessly claimed that Democrats would “defund the police” and give “voting rights and welfare to 25 million illegal aliens” if they won the midterms. Republicans will still control the White House in 2027 and 2028 and the president would be in position to veto any such changes if a Democratic-controlled Congress sought to make them, but there is no indication that Democrats want to do so. Also, even groups favoring strict immigration policies estimate that the total undocumented population is far less than “25 million” or even 20 million.As he did Wednesday, Trump claimed the US now has the world’s lowest prescription drug prices. The assertion is so broad that it is unclear what exactly Trump is referencing. But experts told CNN they highly doubt that the prices for brand-name drugs in the US are generally less than they are in other countries, and the Trump administration has not provided details to prove the claim.“It’s tough to claim that you’re getting the lowest prices anywhere in the world and then also not have any evidence to support that,” said Andrew Mulcahy, a senior health economist at RAND, while Diederik Stadig, senior healthcare economist at financial institution ING, said, “To say that the US now has the lowest drug prices in the world is at this moment not true.”And as he did Wednesday, Trump said “more Americans are working today than ever before” – which is true but nearly meaningless, since the number of people working in the US generally rises over time simply because the population rises over time.“There are more Americans working because there are more Americans. That’s the entire analysis,” Justin Wolfers, a University of Michigan professor of public policy and economics, wrote in his newsletter in August.RFK Jr.’s false claims on the pandemic, Trump’s record and moreFalse claim about Democrats and the 2024 electionKennedy unsuccessfully ran for the 2024 Democratic presidential nomination before withdrawing to run as an independent and then eventually endorsing Republican candidate Donald Trump. In Kennedy’s Thursday convention speech, he complained of how the Democrats handled the nomination race.At one point, he said, “For the first time in history, they cancelled their own convention. No voter ever cast a primary ballot for Kamala Harris, no elected delegate was ever consulted; the party of ‘No Kings’ simply anointed a queen.”Kennedy is entitled to express unhappiness about how quickly Democratic leaders coalesced around then-Vice President Harris after Biden unexpectedly dropped out of the race in July 2024, after the primaries were over and less than four months from Election Day. But it’s not true that the party canceled its convention or that delegates didn’t get any say.The convention was held; it was a four-day event in Chicago in August 2024. Democratic convention delegates officially nominated Harris in a virtual roll call vote in advance of the convention. It’s true that Harris was the only candidate on the roll call ballot, but that’s because she was the only candidate who gathered enough delegate signatures to appear on the ballot.It’s clear that party elites’ backing of Harris played a key role in the unusual nomination process. But Kennedy’s specific allegations that the convention was abandoned and delegates were cut out of the process are not true.False claim that Democrats closed ‘every church’ during the Covid-19 pandemicWhile attacking Democrats, Kennedy claimed that, during the Covid-19 pandemic, “They closed every church in our country for a year.”It’s not true that every church in the country was closed for a year, nor even that every church in a Democratic state was closed for a year.Every state issued some type of guidance or order about social distancing during the Covid-19 pandemic, but many states – including some led by Democrats and some led by Republicans – incorporated religious exemptions into those limitations on social interactions.According to a Pew Research Center analysis from April 2020, 15 states allowed religious gatherings to continue without a limit on their size. That set of states included Colorado, Michigan and Pennsylvania, which all had Democratic governors. And at least two states with Republican governors, Alaska and Idaho, were among the states that prohibited religious gatherings at least briefly.False claim that Trump ‘ended nine wars’Trump has repeatedly claimed that he has ended “eight wars.” Kennedy went one higher on Thursday, declaring, “President Trump has ended nine wars.”That’s false. Trump hasn’t even ended eight wars.Trump’s list of eight includes two situations that were never actually wars during his tenure: a diplomatic dispute between Egypt and Ethiopia and a mysterious supposed situation between Serbia and Kosovo. The list also includes a war, involving Rwanda and the Democratic Republic of Congo, that hasn’t actually ended despite a peace agreement brokered by the Trump administration.In addition, the list includes the war between Israel and Hamas, but Israel continues to conduct frequent attacks in Gaza despite a US-brokered ceasefire agreement. And it includes the brief 2025 conflict between Israel and Iran, though Israel proceeded to join the US in starting another war against Iran in 2026.Claim about reversing a decline in longevityKennedy speaking of the Trump administration, claimed Thursday: “We have now reversed a 30-year decline in longevity. “Kennedy referenced preliminary data that he said he had received from the US Centers for Disease Control and Prevention this week, but it’s unclear what metric of longevity he’s referring to.CDC data shows that US life expectancy had been steadily increasing for decades before a sharp drop during the Covid-19 pandemic. Life expectancy had already started to rebound in 2022, under the Biden administration, and reached a new record high in 2024 before Trump’s second term began.Preliminary data shared by the CDC in July suggests that life expectancy probably hit another record high in 2025.CNN has reached out to HHS for clarification on Kennedy’s comments.Claim that Democrats ‘lost 360,000 children’Speaking about Democrats, Kennedy said: “They somehow lost 360,000 children and they turned our federal government into the biggest child trafficking operation in world history.”Trump and other Republicans have made similar claims. But there’s no basis for the assertion that Democrats “lost” so many children or that the federal government was engaged in human trafficking.A 2024 report from the inspector general for the Department of Homeland Security said Immigration and Customs Enforcement had reported that more than 32,000 unaccompanied migrant children failed to appear as scheduled for immigration court hearings after being released or transferred out of custody between fiscal years 2019 and 2023 – a period that, notably, includes two years and four months under the first Trump administration. The report also said that 291,000 unaccompanied migrant children during this period were not given notices to appear in court.The report said that ICE had “no assurances” these children “are safe from trafficking, exploitation, or forced labor.” But it did not say all the children were actually “lost” and did not definitively assert that any of them were trafficked – let alone that the government was somehow involved in a trafficking operation. And, again, the report spanned parts of both a Republican administration and a Democratic administration.Aaron Reichlin-Melnick, senior fellow at the American Immigration Council, told CNN in 2024: “Long story short, no, there are not 320,000 kids missing. 32,000 kids missed court. That doesn’t mean they’re missing, it means they missed court (either because their sponsor didn’t bring them or they are teenagers who didn’t want to show up). The remaining 291,000 cases mentioned by the (Office of the Inspector General) are cases where ICE hasn’t filed the paperwork to start their immigration court cases.”Vance on inflation, crime and taxes on Social SecurityA false claim about the media and Biden-era inflationVice President JD Vance mocked the media during part of his speech on Thursday. But he made a false claim about Biden-era inflation while lampooning how the media supposedly challenged him over another false claim on that subject.Vance said: “The president and I would go during a campaign, we’d say, ‘You know, inflation is as high as it’s been in 100 years,’ and the fake news would say, ‘No, no, no, it’s as high as it’s been in 68 years.’ That ain’t good, ladies and gentlemen.”Mainstream journalists, at least, wouldn’t say that inflation under Biden was as high as it had been “in 68 years.” Rather, CNN and others noted that peak inflation under the Biden administration, 9.1% in June 2022, was the highest in about 40 years.Vance is entitled to make his general point that this correction still doesn’t make Biden-era inflation sound good, but his specific number was, again, wrong. And he didn’t acknowledge that inflation fell sharply under Biden after hitting the 40-year high, declining to 2.9% in Biden’s last full month in office, December 2024, and 3.0% in January 2025, when Trump and Vance were inaugurated.The rate was 3.4% in July 2026, the most recent month for which data is available.Trump didn’t end taxes on Social SecurityVance claimed, “We’ve ended taxes on Social Security.” Several other convention speakers, including Rep. Lisa McClain of Michigan, Rep. Ryan Mackenzie of Pennsylvania and Ohio House candidate Derek Merrin, similarly said the administration has achieved “no tax on Social Security.”It hasn’t. The big domestic policy bill Trump signed in 2025 did create an additional, temporary $6,000-per-year tax deduction for individuals age 65 and older (which phases out for individuals earning $75,000 per year or more), but as the White House has implicitly acknowledged, millions of Social Security recipients will continue to pay taxes on their benefits even before the temporary new deduction expires after 2028.The Social Security Administration said in 2025 that “the bill ensures that nearly 90% of Social Security beneficiaries will no longer pay federal income taxes on their benefits.Claim about violent crime rate under BidenWhile criticizing the Biden administration, Vice President JD Vance claimed Thursday that the US “became a country where violent crime exploded, unless, of course, you could afford private security.”But violent crime did not explode under Biden. In fact, as FactCheck.org reported last month, data collected and published by the FBI shows that the national violent crime rate was at a lower level in 2023 and 2024, the last two full calendar years of Biden’s term, than it was in 2020, the last full calendar year of Trump’s first term. The year 2020 was highly unusual in many ways – violent crime jumped amid the Covid-19 pandemic – but Biden nonetheless left office with violent crime lower than it was when he took over. In fact, the 2024 violent crime rate was even lower than the 2019 rate under Trump before the pandemic.There was an increase in violent crime during the earlier part of Biden’s term. But given the subsequent decline, it’s misleading at best to claim violent crime “exploded” with no further context.Asked earlier this month about Trump’s similar previous claims to have reversed a Biden-era upswing in violence, crime data expert Jeff Asher said in an email: “No, crime began dropping significantly in 2023 during the Biden administration. Murder fell at record rates in 2023, 2024 and 2025 and, while 2026 may not feature a record decline nationally, it is still on track to see a sizable double-digit decline this year. Violent crime similarly fell nationally in 2023 and 2024, though the drops were more muted than the decline that was recorded by the FBI in 2025.”Other GOP speakersMike Johnson’s false claim about the inflation Republicans inherited from BidenSome other speakers at the convention took aim at inflation under Biden. House Speaker Mike Johnson claimed that “Republicans inherited from the Biden administration record-high inflation.”That’s not true. The inflation rate was 2.9% in Biden’s last full month in office, December 2024, and 3.0% in January 2025, when Trump took over. That’s lower than the most recent rate, 3.4% in July 2026, and nowhere close to the all-time record of 23.7%, which was reached in 1920, or the highest point of Jimmy Carter’s presidency, 14.8%, which was reached in 1980.Johnson correctly said moments later that inflation reached “a 40-year high of 9.1% inflation” under Biden. But a 40-year high is not an all-time record. More importantly, Johnson didn’t explain that 9.1% was much higher than the rate Trump inherited or that the 9.1% rate occurred in June 2022, with roughly two-and-a-half years left in Biden’s term.The cumulative increase in prices from the beginning of the Biden administration to the end was also not the highest in US history. Federal figures show that beginning-to-end inflation under Biden was less than half of that during Carter’s term.What Johnson left out of his claim about a congressional resolutionWhile attacking Democrats as extreme, Johnson said: “Just last week, nearly every Democrat in the House of Representatives voted against condemning socialism and Marxism. They voted against it.”But the resolution didn’t use the word “Marxism.” And Johnson didn’t mention that the resolution wasn’t only about condemning socialism. Rather, it contained other language that Democratic leadership said was the focus of the party’s opposition to the resolution.The resolution’s first provision said it “condemns and denounces socialism in all its forms, including the Democratic Socialists of America, and opposes the implementation of socialist policies in the United States.” But its fifth provision said it “calls for enactment of the SAVE America Act,” Trump’s favored elections bill, which contains various provisions opposed by many Democrats.So while it’s very possible many Democrats would have opposed the resolution even without its expression of support for the SAVE America Act, the call to pass this elections bill served as a poison pill that ensured most Democrats wouldn’t support it.“House Resolution 1490 explicitly calls for enactment of the so-called SAVE America Act, which is the top legislative priority of far-right extremists,” Democratic House leader Hakeem Jeffries said in a statement last week.A New Mexico candidate left out key context in an attack on his opponentGreg Cunningham, a Republican House candidate in New Mexico, used some of his Thursday speech to criticize his Democratic opponent, Rep. Gabe Vasquez. Cunningham said of Vasquez: “He even voted against a resolution honoring the sacrifices and service of the brave men and women in law enforcement who protect, every day, our communities.”But Cunningham left out important context about the resolution. While its focus was expressing support for law enforcement, its preamble contained statements praising the Trump administration and criticizing “leftist activists,” “progressive politicians” and “sanctuary city policies” for allegedly making law enforcement less safe.In other words, a House member might vote against such a resolution, as the vast majority of Democrats did, because they disagreed with conservative components of it, not the general expressions of support for law enforcement. (CNN has reached out to Vasquez’s campaign and House office for comment on his vote.) It’s common for parties to write resolutions in a way that would make it difficult for opponents to support but would open those opponents to campaign attacks if they voted “no.”An Ohio candidate’s misleading attack about Democrats and votingMerrin, the Republican candidate running against Democratic Rep. Marcy Kaptur for a House seat in Ohio, claimed in his speech, “While Democrats talk about letting illegal immigrants vote in our election, Republicans fight for proof of citizenship, photo ID and fair elections.”It’s a big country, so it’s possible some Democrat somewhere is talking about letting undocumented people vote in some election. But Merrin’s claim is misleading at best. There is no proposal from Democrats in Congress to let undocumented people vote in the 2026 midterms – the election Merrin appeared to be referring to when he said “our election” – or vote in future federal elections.CNN has reached out to Merrin’s campaign for an explanation of his claim.House Majority Leader Steve Scalise invoked a similar theme in his speech Wednesday, claiming that Democrats had voted last week “to allow illegals to vote in our federal elections.” But there was no congressional vote on letting undocumented immigrants vote in any elections.Rather, there was a vote on the non-binding Republican resolution that included multiple provisions, including one that “reiterates the notion that American elections are for American citizens only,” one supporting Trump’s favored elections bill and one denouncing socialism.Opposing that multi-clause resolution doesn’t necessarily mean someone supports voting by any non-citizens, let alone non-citizens in the country illegally.This article has been updated with additional items.CNN’s Deja Oliver contributed to this report.The-CNN-Wire™ & © 2026 Cable News Network, Inc., a Warner Bros. Discovery Company. All rights reserved.
Scientists tested 212 plant-based meat alternatives. Every one contained fungal toxins
Every one of 212 plant-based meat alternatives and drinks tested in the UK contained at least one naturally occurring fungal toxin, though concentrations remained below recommended EU guideline levels. Researchers say the bigger question is whether regularly eating large amounts of these foods could lead to potentially concerning cumulative exposure over time.
Vikings’ J.J. McCarthy Gets Concerning Take Ahead of Broncos Game
Minnesota Vikings QB J.J. McCarthy hasn’t had the best preseason so far in 2026. That’s not really a good thing since the preseason is 66% over.None of the drives that he’s led so far in the preseason have led to a touchdown, and his cumulative completion percentage is a hair above 50%. He’s looked shaky, […] The post Vikings’ J.J. McCarthy Gets Concerning Take Ahead of Broncos Game appeared first on HEAVY.
New Science Says Scrapping A Working Gas Car For An EV Is Usually Greener
New lifecycle research finds that scrapping some working gasoline cars early and replacing them with EVs can substantially cut cumulative emissions.
Marine Heatwaves Are Hiding Far More Heat Than Scientists Realized
The first study of its kind shows that ecosystems experience far more cumulative heat than standard measurements reveal. A marine heatwave may have an official beginning and end, but the warm water affecting an ecosystem often does not. Like a pot that continues absorbing heat over time, coastal waters can remain unusually warm for weeks
Windows 11 KB5101684 update released with 42 changes and fixes
Microsoft has released the KB5101684 preview cumulative update for Windows 11 24H2 and 25H2, which 42 bug fixes and additional feature improvements for the operating system.
All Arkansas baseball interests sign before MLB Draft deadline
The 12 drafted Razorbacks signed for a cumulative total of more than $14.7 million.
Prolonged exposure to wildfire smoke increases cardiovascular health risks
Repeated and cumulative exposure to wildfire smoke is linked to a higher risk of being hospitalized for cardiovascular disease in older adults in the U.S., a new Yale study finds.
Baseball Tallies Another ABCA/Sports Attack Academic Achievement Honor
GREENSBORO, N.C. – The American Baseball Coaches Association (ABCA) has announced that the Augustana baseball team has once again received the ABCA/Sports Attack Team Academic Excellence Award. Augustana collected a cumulative GPA of 3.35 in 2025-26.
USPS tells Congress it needs cash rescue amid broken business model
Postmaster General David Steiner told a Senate committee the agency has amassed nearly $31 billion in cumulative defaults and could run out of cash by year's end
Windows 11 KB5095093 update rolls out new Point-in-Time restore feature
Microsoft has released the KB5095093 preview cumulative update for Windows 11 24H2 and 25H2, which fixes numerous bugs and begins rolling out new features, including the new Point-in-Time restore feature.
Live Nation Entertainment Stock Surges 10%, With A 5-Day Winning Spree
Live Nation Entertainment (LYV) - a live music events promoter and ticketing software provider. - hit a 5-day winning streak, with cumulative gains over this period amounting to 10%. The company's market cap has surged by about $3.8 Bil over the last 5 days and currently stands at $41 Bil.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Life Sciences Investment Opportunities Accelerate as AI and Genomics Drive $200+ Billion Market Expansion
“Covering more than 25 recently published reports, the review provides a consolidated view of growth opportunities across healthcare technologies, biologics, diagnostics and therapeutic markets.”Boston, June 01, 2026 (GLOBE NEWSWIRE) -- The global life sciences industry is experiencing unprecedented growth momentum across multiple therapeutic and diagnostic segments, with cumulative market opportunities exceeding $200 billion by 2030, according to BCC Research's latest comprehensive analysis. Th
Q1 Airports Passenger Traffic Flat - Los Angeles Business Journal
Cumulative passenger traffic at the four airports serving Los Angeles County came in flat during the first quarter of the year. According to data released
UniCredit to Take Cumulative €3 Billion Hit on Russia Sale
UniCredit SpA has signed a non-binding accord to sell parts of its business in Russia to a private investor in the United Arab Emirates, as the Italian lender accelerates efforts to scale back its presence in the country.
Oilers spring sports stand strong
By Mara Waire wairem@findlay.edu Men’s Golf The University of Findlay Men’s Golf team competed on the road at the Wright State Invitational on April 13, 2026, finishing 4th overall against a field composed primarily of Division I programs. The team posted a cumulative score of 18 over par, recording consistent rounds of 292, 284, and […]
The Future of Colorado condo development
By Peter LiFari For nearly two decades, the story of condominium construction in Colorado has been mistold, misunderstood and misrepresented. This outcome reflects the cumulative effect of more than two decades of Colorado policy, beginning with the Construction Defect Action Reform Act of 2001 and evolving through subsequent legislative changes, that have reshaped the risk landscape governing […]
Bordonaro: Legislature’s labor agenda risks hurting business competitiveness
With the Labor Committee approving 48 bills in six weeks, the cumulative weight of new scheduling rules, striking worker benefits and operational mandates risks making Connecticut a harder place to do business at exactly the wrong time.
Train transfer hub linked to reduced healthcare spending
Researchers from Osaka Metropolitan University and Japan System Techniques Co., Ltd. evaluated the 2019 Osaka-Higashi Line station openings using a natural experiment and health insurance claims. While the overall rail-line effect was not significant, Shigino Station, a well-connected transfer hub, showed an estimated cumulative reduction of about JPY 62,500 per medically treated person over four years, highlighting that station connectivity and local context may determinewhether new stations deliver healthcare cost benefits.
April’s NCSciFest shows ‘Science Matters’ in all 100 counties
As it turns 16, the nation’s first statewide science festival expects to surpass 4 million in cumulative participation.
Windows 11 KB5079391 update rolls out Smart App Control improvements
Microsoft has released the KB5079391 preview cumulative update for Windows 11 24H2 and 25H2, which includes 29 changes, such as Smart App Control and Display improvements.
Glyphosate: A story of science, risk, and nuance
In the summer of 2014, a California groundskeeper named Dewayne Johnson started noticing patches of raw, weeping skin spreading across his body. He had spent years applying Roundup, Monsanto’s glyphosate-based herbicide, for a school district, sometimes drenched in it when equipment malfunctioned. By 2014, he had a diagnosis: non-Hodgkin’s lymphoma. In 2018, a jury awarded him $289 million in damages, later reduced on appeal. Tens of thousands of lawsuits followed. The story hasn’t quieted down. It’s all over the internet, swinging between “this will kill you, buy organic” and “relax, you’re fear-mongering.” Some of that recent chatter stems from an Executive Order protecting glyphosate and its production, which set off intense infighting within the MAHA movement. Some of it reflects a deeper truth: Americans genuinely care about harmful chemicals in their environment (see poll below). And the conversation isn’t going anywhere, with a Supreme Court case involving Monsanto set for this April. Glyphosate (the active ingredient in Roundup) is one of the most widely used herbicides in the world. But does glyphosate cause cancer? And how much exposure is actually risky? With so much mistrust in institutions and corporations (and some genuine conflicts of interest), making sense of the actual scientific evidence is genuinely hard. Here is a translation of what the scientific evidence actually says. Does glyphosate cause harm? Glyphosate is an herbicide that kills most plants it contacts rather than targeting specific species. It works by blocking an enzyme pathway (EPSPS) that plants and many microorganisms need to produce essential amino acids. Without those amino acids, the plant can’t grow and dies. Glyphosate was first developed by Monsanto in the 1970s and became ubiquitous after the company introduced “Roundup Ready” crops in the 1990s. In 2024, Bayer removed glyphosate from residential Roundup-branded products due to litigation pressure. But today it is still the most widely used herbicide in the world. Farmers also discovered they could spray it directly on crops like oats, lentils, beans, and peas just before harvest to dry them out faster and make harvesting easier. Because of its widespread use, it’s obviously really important to understand if it’s harmful to humans. The key principle: The dose makes the poison The most important concept in toxicology is that “the dose makes the poison.” Sixteenth-century physician Paracelsus articulated what remains the foundational principle of toxicology: sola dosis facit venenum. Water will kill you if you drink enough of it. Aspirin saves lives at 81 milligrams and causes internal bleeding at higher chronic doses. So, at what dose is glyphosate poisonous? The LD50 in rats (the dose that kills half the test animals) is around 5,600 mg/kg body weight. Table salt is roughly 3,000 mg/kg. By that classic measure, glyphosate is less acutely toxic than salt. But some people are exposed to a lot of glyphosate through their work. And among the general public, there are many questions about low-dose, cumulative exposure from multiple sources over long periods. Does glyphosate cause health problems? Cancer Correlation maps are striking, with one analysis finding that 60% of counties that spray the most glyphosate have non-Hodgkin’s lymphoma rates above the national average. But correlation alone doesn’t establish cause, which is why animal and human studies matter. In animals: Rat studies are typically what most fear is rooted in, but most people don’t know the study details on the dosage given to rats. A pooled analysis of the 13 most rigorous rat studies found evidence that very high doses, around 55,000 times greater than typical food residue exposure, can cause certain cancers. In humans: One of the strongest studies followed 55,000 herbicide users over 20 years and found no overall increased cancer risk. There was one signal: among those with the highest use, rates of acute myeloid leukemia (AML) appeared elevated. A broader meta-analysis of 18 human studies also found no overall cancer risk, though a separate meta-analysis focused specifically on non-Hodgkin lymphoma found that people with high cumulative glyphosate exposure faced a 41% higher relative risk compared to those with low or no exposure. These human studies are observational studies (randomized controlled trials would be unethical), and meta-analyses are only as reliable as the studies they pool. But the story seems consistent: at very high exposure levels, there may be some cancer risk. But that’s about as far as the science currently takes us. Emerging research: gut and reproductive health Gut: Because glyphosate targets a pathway that exists in some gut bacteria, scientists have questioned whether it could affect the microbiome. In mice, a 2023 University of Iowa study found that glyphosate altered gut bacterial composition and raised markers of intestinal inflammation. A 2024 systematic review found similar patterns: disrupted gut bacteria and problems with the mucus layer that protects the intestinal wall in mice. Whether this translates to humans is an open question. The human gut is highly variable and resistant, and we don't yet have strong studies confirming the same effects in people. Reproductive health: Animal studies have found that glyphosate-based herbicides can interfere with reproductive hormones, including disrupting egg cell development in mice and reducing the number of eggs available in sheep’s ovaries. However, the doses used in these experiments were high, so it’s not yet clear whether the same effects would occur in humans. On the human side, a 2021 pilot study led by Mount Sinai researchers tested urine samples from pregnant women across the U.S. and found glyphosate in 95% of them. The study also found a possible connection between higher glyphosate exposure during pregnancy and a subtle physical difference measured in female newborns. That said, some connections weren’t statistically reliable and this was a small study. The researchers themselves said more and larger studies are needed before drawing firm conclusions. What do regulators say about glyphosate safety? In 2015, the International Agency for Research on Cancer (IARC), part of the World Health Organization, classified glyphosate as "probably carcinogenic to humans" (Group 2A). The classification is worth taking seriously. But, there’s an important distinction: IARC classifies hazard, meaning the potential to cause harm under some conditions. It does not assess risk, which accounts for actual exposure levels and the real-world probability of harm. The U.S. EPA, the European Food Safety Authority, Health Canada, and regulatory agencies in Australia and Japan have all concluded that glyphosate is “unlikely to be carcinogenic to humans” at realistic exposure levels. They’re asking a different question: given how much of this people actually encounter, what is the probability of harm? Your actual exposure is what determines your actual risk. What does glyphosate mean for your daily life? At the grocery store: Food residues are small. The EPA’s acceptable daily intake is 1.75 mg/kg of body weight per day. To hit that threshold from oatmeal alone, a 150-pound adult would need to eat roughly 50 pounds of oats every day. But this calculation addresses only one pathway (food), and we don’t yet have robust tools to measure people’s actual total exposure. If reducing exposure matters to you, organic certification prohibits synthetic herbicides, and organic oat products generally test at lower or undetectable levels. Either way, a diet rich in whole grains, conventional or organic, is far better for your health than one that omits them out of fear of residues. On the farm: Occupational exposure is orders of magnitude higher than consumer exposure. Farmers and farm workers who mix, load, and apply glyphosate-based herbicides, especially without protective equipment, face meaningfully different risk profiles. Proper PPE isn’t optional. Integrated weed management strategies that rotate chemical modes of action are also worth taking seriously, both for health and for long-term effectiveness. If you live near a farm: Spray drift is real. Concentrations near field edges can spike during and after application, particularly on windy days. This is an area where I think public health could really step up and empower rural communities with buffer zones, rather than placing the onus on individuals. But for now, knowing your local agricultural calendar and keeping windows closed during application are the first steps. Bottom line Dewayne Johnson was exposed to glyphosate at levels most people will never encounter, and a jury decided he deserved compensation. That outcome is not evidence that the oatmeal in your pantry is dangerous. But it is a reminder that the dose, the context, and the person doing the exposing all matter enormously. Glyphosate is a chemical tool with benefits, trade-offs, and genuine open scientific questions. Learning to hold that complexity without collapsing into panic or dismissal is, honestly, one of the most useful and hardest things to do in navigating modern health science. Love, YLE Your Local Epidemiologist (YLE) is founded and operated by Dr. Katelyn Jetelina, MPH PhD—an epidemiologist, wife, and mom of two little girls. Hannah Totte, MPH, is an epidemiologist and YLE Community Manager. YLE reaches more than 425,000 people in over 132 countries with one goal: “Translate” the ever-evolving public health science so that people will be well-equipped to make evidence-based decisions. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
We (Still) Have the Science on Cumulative Impacts
That’s why we need cumulative impacts policies, which require the evaluation of multiple stressors and burdens so the decisions that get made are more comprehensive, effective, and equitable.
Microsoft releases Windows 11 OOB hotpatch to fix RRAS RCE flaw
Microsoft has released an out-of-band (OOB) update to fix a security vulnerabilities affecting Windows 11 Enterprise devices that receive hotpatch updates instead of the regular Patch Tuesday cumulative updates.
Windows 11 KB5077241 update improves BitLocker, adds Sysmon tool
Microsoft has released the KB5077241 optional cumulative update for Windows 11, which comes with 29 changes, including improvements to BitLocker, a new network speed test tool, and native System Monitor (Sysmon) functionality.
Tlaib, health advocates sound alarm as EPA works to loosen pollution standard
Opponents of the EPA's actions join virtual press conference Tuesday.
Windows 11 KB5074109 & KB5073455 cumulative updates released
Microsoft has released Windows 11 KB5074109 and KB5073455 cumulative updates for versions 25H2/24H2 and 23H2 to fix security vulnerabilities, bugs, and add new features.
Refugee and migrant health system review in Lithuania
Lithuania has experienced a substantial increase in the number of refugees and migrants, particularly following the 2021 Belarus border situation and the mass displacement from Ukraine in 2022. By late 2024, over 91,000 Ukrainians had been cumulatively registered in Lithuania, with about 47,000 holding valid temporary protection status. This increase, alongside sizeable communities of Belarusian nationals, Russian citizens and other regular migrants covered under compulsory health insurance contributions, has brought new challenges for Lithuania’s health system, especially related to continuity of care, interpretation support and equitable access across municipalities. This report presents the findings of a joint review of the health system in Lithuania, conducted by the World Health Organization (WHO) in close collaboration with the Ministry of Health of Lithuania, and other partners. The review examines the capacity of Lithuania’s health system to provide services for refugees and migrants. It focuses on the health challenges facing refugees and migrants, the policies and systems in place to address these challenges, and the opportunities to strengthen long-term health system capacity. Furthermore, the report offers practical recommendations for addressing the barriers refugees and migrants face in accessing health services.
Windows 11 KB5070311 update fixes File Explorer freezes, search issues
Microsoft has released the KB5070311 preview cumulative update for Windows 11 systems, which includes 49 changes, including fixes for File Explorer freezes and search issues.