SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " assist " 1,561 found 🔀 AI-powered Shuffle
Egor Shilov Drafted 43rd Overall By Colorado Avalanche
Penn State hockey commit Egor Shilov was drafted 43rd overall by the Colorado Avalanche in the 2026 NHL Entry Draft: Shilov quickly flew up the NHL Draft radar after an outstanding 2025-26 season with the Victoriaville Tigers of the QMJHL. He had 82 points (32 goals, 50 assists) in the regular season, good for 7th […]
AI-assisted colonoscopy enhances polyp detection at UT Health San Antonio Multispecialty and Research Hospital
Contact: Steven Lee, (210) 450-3823, lees22@uthscsa.edu Content provided by Kristen Zapata SAN ANTONIO, June 29, 2026 – A routine colonoscopy may last less than an hour. But what happens during that procedure can change, or even save, a life years before cancer ever has a chance to develop. Physicians at The University of Texas at San […]
Cascades doubles down on business case for sustainability
The fiber specialist laid its path forward in a 2026-2030 sustainability plan. It’s emphasizing supplier vetting and its capacity to assist customers with their sustainability goals as it continues to strive for widely recyclable packaging.
Emily Wilcox Named Assistant Athletic Director for Sports Communications
Emily Wilcox has been named Assistant Athletic Director for Sports Communications. Her first day is slated for July 13.
Professor Willow’s Birthday Research
Starts Tuesday, July 21, 2026, at 10:00 AM Local Time Ends Tuesday, July 21, 2026, at 8:00 PM Local Time Wish Professor Willow a very happy birthday with Professor Willow’s assistant Pikachu! This adorable Pikachu makes their Pokémon GO debut as part of the Willow’s Birthday Research event along with GO Snapshots, raids and more […]
AI Assistant Tool QED Scores bioRxiv Preprint Quality
QED, an AI assistant tool, evaluates the originality and validity of bioRxiv preprints, assigning them QED Scores. Researchers report that its rankings often align with expert opinion.
$10M behavioral health unit opens at Milwaukee’s St. Francis Hospital
The renovated facility will serve 61 adults and children in need of behavioral health services, primarily assisting patients in southeastern Wisconsin. This expansion comes as Milwaukee faces challenges in keeping mental health facilities open
Sofia Elverdin Selected as Co-Recipient of the Best Dissertation Prize From the American Political Science Association’s Women, Gender and Politics Section
Sofia Elverdin, assistant professor of politics at Washington and Lee University, was recently selected as a co-recipient of the American Political Science Association’s (APSA) Best Dissertation Pr…
Life At The Speed Of Play Explores AI In Business
Mark Pincus advocates gamification, journaling, rapid experimentation, and AI-assisted innovation for entrepreneurs.
How should European scientists respond to the US AI kill switch?
Earlier in June, Europe’s worst fears of technological dependence were confirmed when the White House ordered the AI firm Anthropic to stop non-US citizens using its leading models. This kill-switch moment crystalised anxieties in Brussels that the continent, lagging the US on the creation of leading-edge AI models, is now a technological of vassal of Washington. The shock has specific implications for European scientists and universities. Some governments are now worried that with AI being integrated into labs, Donald Trump now has his finger hovering over an off switch for European science. “Having restrictions on this tool, it can have an impact on our own research,” said France’s research minister, Philippe Baptiste, at the VivaTech conference in Paris on June 18.Baptiste, himself a former academic, said that colleagues in mathematics had recently warned him they were now cut off from leading-edge US models, risking their work. “This model is not available anymore now because of the US restriction, and for the first time this had an impact on mathematics,” a field where large language models (LLMs) are making a significant contribution, said Baptiste. So, should European scientists avoid relying on US models in the future? Or would this be a self-harming overreaction? And how is AI being used in science, anyway? What happened?On June 12, it emerged that Washington, citing cybersecurity concerns, had ordered Anthropic to stop non-US citizens using two models: Claude Mythos 5, and Claude Fable 5, a version of Mythos but with guardrails to prevent abuse. Anthropic said Washington’s concerns were overblown. But forced to follow the order, yet with no way to check who was using the models, the company suddenly shut down access for everyone, US citizens included. There’s still no agreement on how to restore broad access. But last week, Bloomberg reported that select US companies, and the US government, still had access to Mythos despite the ban, but the EU’s cybersecurity agency Enisa had been shut out. Class division of researchersIn the longer term, access outside the US should be restored, said Marcel Salathé, co-director of the AI centre at the Federal Polytechnic School of Lausanne (EPFL), because a permanent restriction would be financially ruinous to US AI firms. “Even Trump will eventually budge to economic pressure,” he said.However, US AI firms might end up operating rather like banks, doing due diligence on users of their leading-edge AI models, he went on.European scientists are unlikely to fall foul of such checks, he said. But having a Chinese postgraduate in their lab, or doing a type of research the US disapproved of, could potentially result in access being denied. “It will create a sort of class division of researchers,” he said. More than frontier modelsHowever, successfully deploying AI in science is about far more than just having access to leading LLMs such as Mythos.Instead, many science-specific tools, most famously Alphafold, which predicts protein folding structures, require “far less” computing power to train than frontier models, well within the capabilities of European supercomputers, according to a recent analysis by the Arq Foundation, a Brussel-based AI think tank. Instead, tools such as Alphafold are possible because certain fields, like protein folding, weather prediction or astronomy, have large, clean, standardised datasets that can be used to train predictive models. Rather than compute, “data is the central constraint for AI for science,” the report says. For example, a less powerful physics model trained on CERN’s data “will be more valuable than the best model without certain data,” said Bengüsu Özcan, author of the report. European advantage?Europe could therefore steal a march by using its scientific data and infrastructure to create models US digital giants cannot. “They might actually match or go even beyond what these big [US] companies are doing,” said Özcan.Indeed, some European start-ups hope to create automated testing labs to create the kind of standardised data that could speed up the discovery of new materials. Materials scientists say there’s currently too little data to train models. AI scientistsHowever, even if the bottleneck for AI in science is often data, rather than compute, being at the mercy of the US for LLM access could still become a problem for European scientists. A new class of “AI scientists” based on leading LLMs is also emerging, Özcan’s report says.Unlike domain-specific tools like Alphafold, these try to automate day-to-day scientific work, by providing an overarching tool that coordinates specific models to synthesise existing literature, generate hypotheses or run analysis of data. The problem for Europe, however, is that these tools are sometimes based on US leading models. Google Deepmind’s AI Co-Scientist, for example, is built on Google’s Gemini LLM. Systematic failureThese scientific automation tools are still in their early stages, and still exhibit “systematic failures on scientific tasks,” Özcan’s report says. One of the problems is that the messy, day-to-day process of scientific discovery is largely not documented, meaning LLMs don’t have a good source of data to learn how scientists actually work. Meanwhile, some tasks, such as literature synthesis, don’t typically require access to leading edge models.However, the performance of AI scientific assistants could improve as companies such as Google pour resources into developing them. Rely on US“Unfortunately, for scientific assistants, there is not much we can do right now except rely on US frontier AI,” said Antoine Bosselut, a natural language processing expert based at EPFL. Chinese-built open models, which can run on local computers, lessening the risk of a shutdown, are touted as one alternative to US dependence. There’s also Mistral, once seen as Europe’s main AI hope, but the Paris-based company has seen its recent models fall behind in performance. But the Chinese alternatives are generally not as capable as US frontier AI models, said Bosselut, unless paired with fiddly, custom tools that allows them to act as independent agents. “Most scientists do not have the time,” he said. Don’t jump ship yetAlthough the kill switch moment is seen a warning shot for European scientists, it doesn’t mean labs should abandon US AI tools immediately. “I do not think the right response is simply to abandon US-based models and systems under the banner of sovereignty or independence,” said Mattias Björnmalm, secretary general of the Cesaer university association. “That would be an overreaction.”Related articlesEuropean sovereignty in AI requires ‘ugly trade-offs,’ say experts Robotic lab start-up makes case for €500M EU-funded materials testing facilityAI in science: is it useful? Instead, European researchers need to ask themselves whether they’re becoming dependent on technology that could be turned off in Washington, said Özcan. “They might not see this today, but they should really start asking this question,” she said. European researchers need a plan B, said Salathé. “I would recommend to every researcher, very proactively explore alternatives.”Own toolsIn addition, Björnmalm and others want European research institutions to develop their own scientific AI tools.Instead of signing AI deals with US digital giants, European universities should be using this money to create their own models, which may end up being superior for research, said Sabine Leonelli, an expert on the use of AI in science at the Technical University of Munich. “Universities in Europe seem to be happy to sign commercial contracts with US companies on the assumption [their AI tools] are better,” she said. But US frontier LLMs are typically opaque, and have been developed without independent scientific input, she said. “This is not good enough for science.”Last year, Swiss researchers released Apertus, an LLM designed to be completely transparent, from its development methods to its training data. The idea is that this makes scientific tools built on top of the model far more reproducible than with closed, commercial alternatives.“Europe needs more of this: serious capacity-building that gives researchers, universities and companies credible options,” said Björnmalm.
Keiser's Paul Dodson Voted 2025-26 SUN Sports Information Director of the Year
The Sun Conference is pleased to announce that Keiser University Assistant Athletics Director of Communications Paul Dodson has been named the 2025-26 Sun Conference Sports Information Director of the Year, as voted on by his peers across the league. The honor marks the third conference SID of the Year award of Dodson's career after previously earning the distinction in 2022-23 at Keiser University and 2018-19 while at Johnson & Wales University.
Facebook rolls out an AI companion app for creators
The new app, which is currently being tested with select creators, will have Facebook's recently-launched AI creator assistant built into it.
Hong Kong Digital Entertainment Association Presents the 3rd "Future Animation - AI-Assisted Animation Production Support Scheme"
/PRNewswire/ -- Organised by the Hong Kong Digital Entertainment Association (HKDEA) and sponsored by the Cultural and Creative Industries Development Agency...
Google Home Speaker review: A modest update for the Gemini era
Google's new speaker is a modest update, but the question is whether Gemini is a good smart home assistant.
Behind the scenes of a successful entertainment career with Jenny Austin ’12
From interviews with big-name celebrities like Will Ferrell to assisting with casting for hit television shows like “The Summer I Turned Pretty,” Jenny Austin ’12 is living out her dreams....
Financing the Future: Leaders Make the Investment Case for Women's, Children's and Adolescents' Health
With development assistance declining and health systems under growing strain, leaders at Africa Health ExCon called for a shift from fragmented financing to integrated, sustainable investment in women’s, children’s and adolescents’ health. Discussions highlighted domestic financing, private sector engagement, service integration and climate-resilient health systems as pathways to greater impact.
Banks Joins Sports Performance Staff
The UNCW Athletics department has announced the addition of Dr. Quadrian Banks as an Assistant Director of Sports Performance on Wednesday.
Entrepreneur Works opens business assistance center in Chester
“We want every business to learn how to properly run a business,” says
Trail Blazers hiring T-Wolves assistant Micah Nori as head coach, reportedly on 1-year deal with team options for subsequent seasons
Health Net Providing Special Assistance to Members and Providers Affected by Palos Warehouse Fire in Los Angeles
[auto]
Priorities for Military Health System: ‘Our mission is readiness’
Keith Bass, assistant secretary of war for health affairs, outlines his strategic priorities for the Military Health System, with funding and staffing at the top of the list to optimize warfighter readiness.
Science Hill HS names Tom Poisal assistant athletic director
JOHNSON CITY, Tenn. (WJHL) — Johnson City Schools announced on Monday that Tom Poisal has been named assistant athletic director at Science Hill High School. According to a news release from the sc…
UWF professor secures $825,000 grant to support cancer survivors - University of West Florida Newsroom
University of West Florida Assistant Professor of Public Health Dr. Karishma Chhabria Unrue has been awarded a nearly $825,000 grant through the Florida Cancer Innovation Fund to lead a statewide initiative focused on improving the health and well-being of breast and prostate cancer survivors. The award represents one of the largest externally funded research grants […]
Amid legal battles, health leaders, LGBTQ+ community concerned for future of gender-affirming care
An increasingly hostile political environment has made it difficult to obtain medical care to assist with gender transitioning in WV.
Air Force award supports research on electronics that can survive extremes
Betul Akkopru-Akgun, assistant research professor in Penn State's Department of Materials Science and Engineering and the Materials Research Institute, has received an Air Force Office of Scientific Research Young Investigator Program award to investigate how electricity and heat move through materials used in extreme environments.
Tesla driver on auto assistance crashed into Texas home, kills woman
It was not clear which of Tesla's features the driver was using at the time of the crash.
2 Cool Features To Use With Samsung Galaxy's Smart View
You can use your voice assistant and cast only specific apps to larger screens when using Samsung's Smart View feature on Galaxy phones.
Success via SNF mental health assistants: How one provider slashed antipsychotics use, bad behavior and hospitalizations
One of the nation’s largest nursing homes is expanding its behavioral health initiatives, offering important insights for caregiving as providers nationwide admit more patients than ever with serious mental illness or other complex diagnoses.
Apple Unveiled These Five New Apps Last Week
Apple last week unveiled five new apps, with four announced at WWDC 2026 alongside its upcoming fall software updates, one released in beta for developers, and one released independently by its subsidiary Claris. Siri AI App One of the biggest announcements of WWDC 2026 was Siri AI, a ground-up rebuild of Apple's voice assistant that for the first time comes with a dedicated standalone app.
Siri AI Hands On: A Smart, Helpful Assistant
The new Siri AI is conversational, omnipresent, and actually helpful.
MSU researcher, Partnership Middle School students collaborate on climate science literacy podcast
STARKVILLE —Mississippi State Assistant Professor Lourdes Cardozo-Gaibisso is immersing local middle school students in climate science literacy exploration through podcasting, helping them share experiences, ask questions and engage with environmental
'Proactive' Johansson's Motherwell appointment 'very exciting'
Former Hibernian player Kevin Nicol believes "proactive" Alfred Johansson's appointment as Motherwell manager is "very exciting". Nicol is assistant at Fredrikstad, who play in the same Norwegian top flight as Johansson's former club Rosenborg. Swede Johansson, 35, replaces Jens Berthel Askou, who became a hugely popular figure with the Fir Park faithful.
Real Estate Is Still a People Business
Unless you’ve been avoiding the internet for the past few years, you’ve probably noticed that artificial intelligence is everywhere. From customer service chatbots to content creation and personal assistants, AI is reshaping how people work, communicate, and access information. Real estate is no exception. Buyers, sellers, and real estate professionals are incorporating AI into their […]
New legislation to open Allentown NIZ’s tax records adds small-business program
Unlike previous bills, this one will have a component to enhance small businesses in the NIZ with an assistance program.
Democratic Socialists Surge in Mayoral Races Across the Country as Anti-Trump Fervor Rises
WASHINGTON (AP) — As Janeese Lewis George paves a path to the mayor's office in Washington, D.C., she's told voters they could have it all. Her unapologetically expansive, left-wing agenda includes subsidized or even free childcare, increased down payment assistance for homebuyers and community ...
The unwanted return of tetanus; why soccer makes people so happy; breast cancer in men; plus other stories with Vanderbilt Health sources
Women’s Health interviewed Kathryn Edwards, MD, Sarah H. Sell and Cornelius Vanderbilt Professor of Pediatrics, for a story about her JAMA Viewpoint article on tetanus making a comeback. Women’s Health interviewed Colin Armstrong, PhD, Assistant Professor of Clinical Psychiatry and Behavioral Sciences and Assistant Professor of Physical Medicine and Rehabilitation, for a story tied to the World Cup about why soccer makes people so happy. An NBC News story about the announcement by “X-Men” actor and former wrestler Tyler Mane that he has breast cancer quotes Ben Ho Park, MD, director of the Vanderbilt-Ingram Cancer Center. The story focuses on how a prominent man with breast cancer may help remove some stigma from a cancer that is rare in males. Prevention magazine interviewed Caitlyn Mooney, MD, Assistant Professor, Department of Orthopaedic Surgery, for a story about a BMJ study that suggests 90 to 120 minutes per week of strength training may lower the risk of death. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Women’s Health (norovirus is more common this summer); SFGate (measles in San Francisco just before the World Cup crowds); Travel + Leisure (how to avoid getting sick on a cruise); and Fox News (mosquito-borne diseases). Reporter Liz DeSantis from WKRN News 2 aired a story on the rehab unit at Monroe Carell Jr. Children’s Hospital at Vanderbilt. Kat Hedden, PT, DPT, PCS, CBIS, Acute Pediatric Physical Therapy Clinical Team Lead and Mary McLanahan, MD, Assistant Professor of Physical Medicine and Rehabilitation were interviewed, as well as the family of patient Will Terry. Reporter Nikki Hauser from WTVF News Channel 5 interviewed Graden Knapp, Gaming and Technology Specialist at Monroe Carell Jr. Children’s Hospital at Vanderbilt about his 3-D wheelchair project. Tennesseanreporter Sandy Mazza covered the announcement of the latest Leadership Nashville class, which includes Jane Freedman, MD, Deputy CEO, and Chief Health Systems Office for Vanderbilt Health; and also the announcement of the latest Leadership Tennessee cohort, which includes Jeff Upperman, MD, Surgeon in Chief at Monroe Carroll Jr Children’s Hospital at Vanderbilt.
Digimon Story: Time Stranger free update launches July 9, adds Terriermon Assistant, Graphics Mode options, more
Publisher Bandai Namco and developer Media.Vision will release a free update for Digimon Story: Time Stranger on July 9 for PlayStation 5, Xbox Series, and PC, and at launch for Switch 2 and Switch…
Photoshop and Premiere now have AI assistants
The latest expansion in prompt-based editing.
Adobe adds its AI assistant to Premiere, Illustrator and InDesign
Adobe is updating its Firefly AI assistant with new chops, and adding it to Premiere, Illustrator, InDesign and Frame.io.
Tulane Athletics Announces Promotion of DéJeuné Green to Assistant Director of Behavioral Health & Performance
Tulane University Athletics announced the promotion of DéJeuné Green to Assistant Director of Behavioral Health & Performance on Thursday. Gree...
May moving on as Hibs reshape backroom staff
Eddie May is to leave his coaching position at Hibernian at the end of June, ending 12 years of service at Easter Road. The 58-year-old made over 100 appearances for the club between 1985-89 and returned in 2014, working across different roles in the academy, player development and with the first team. In June 2024, May he was chosen as an assistant coach, along with Liam Craig, as David Gray took on the position of head coach.
The Constitutional Politics of Chile’s National Reconstruction
--Benjamín Alemparte, Assistant Professor of Constitutional Law, University of Chile Constitutions do not change only through formal amendment. Bruce
AI Health Startup Wants to Assist Half of Latin American Doctors
An Andreessen Horowitz-backed healthcare startup born in Latin America wants to put its AI assistant in the hands of half the region’s 1.9 million doctors by the end of 2027, a bet that technology can help bridge a shortage of medical professionals across strained health systems.
Google bets on Gemini to reinvent the smart home speaker
Google is betting generative AI can breathe new life into the smart speaker. The company's new $99.99 Google Home Speaker replaces the rigid commands of the Google Assistant era with more conversational Gemini interactions.
Google’s first smart speaker in six years arrives next week
The Google Home Speaker is designed for Gemini for Home and its more conversational smart home assistant.
Governor Sherrill Secures SBA Economic Injury Disaster Assistance for Businesses and Nonprofits Affected by Belleville Fire
FOR IMMEDIATE RELEASE June 17, 2026 Governor Sherrill Secures SBA Economic Injury Disaster Assistance for Businesses and Nonprofits Affected by Belleville Fire Business Recovery Center Opened June 16 in Belleville TRENTON – Small businesses and private nonprofit organizations affected by the devastating May 3, 2026 fire in Belleville Township may now apply[...]
Latvia pilots citizen engagement in research grant evaluations
Latvia has introduced an element of citizen engagement to the evaluation of nationally funded research grants. The aim is to both create more connections between science and society, and to improve the quality of its evaluations. The move comes as research funders across Europe are experimenting with ways to improve evaluation processes in the face of a sharpened focus on science’s impact on society. Evaluators of grant applications submitted to Latvia’s Fundamental and Applied Research Programme (FLPP), the country’s main research funder, will this year have the option of consulting citizen feedback on challenges the public thinks science should focus on to inform their decisions. “In recent years, both public discussions and policy-level debates in Latvia have highlighted the importance of demonstrating how publicly funded research contributes to society, the economy and the resolution of real-world challenges,” said a source at the Latvian Council of Science (LCS), which manages the FLPP. “At the same time, research institutions themselves expressed interest in improving the project evaluation framework while continuing to ensure that funding is awarded to the highest-quality projects,” the source added. The citizen input comes from a survey that was conducted between 25 February and 16 March 2025, to which 1,737 people responded. It gathered information on what the public views as problem areas for Latvia, and the role of science and technology in providing solutions to these problems. A summary of these responses has been included as an annex to the FLPP 2026 call for proposals that evaluators can refer to, purely in an advisory manner, when judging proposals. Results from the survey show that the main problem areas identified by the public were in healthcare and public health, followed by the development of new treatment methods and medicines, and then digital technology, data security and cyber security. At the bottom of the list was research aimed at acquiring new knowledge about the universe, matter and the laws of nature. Further analysis looked at the public view of the possible role of science in solving these problems. The survey charted 4,167 individual responses based on open-ended questions that were derived from the participants’ answers. The analysis again found that medical and health sciences topped the scoring, with 788 responses referring to the field. Humanities and the arts were bottom of the list, with 625. Digging further into the details, the survey suggests citizens are aware of and concerned about a number of research areas. This includes technologies and innovation to improve the environment or reduce pollution, the development of modern military technologies and cybersecurity tools, and the development and application of artificial intelligence, among others. “We hope this initiative will help strengthen public trust in science and create a more meaningful dialogue between researchers and society,” the LCS source said, adding that it offers benefits to researchers, evaluators and to the general public. More space for citizen engagement in evaluationsThere is a gradual but increasing use of citizen engagement in research evaluation processes around Europe, especially in healthcare, but it remains relatively rare, said Henry Sauermann, a professor at the European School of Management and Technology in Berlin and an expert in citizen science.“Given that we are at a point where citizen involvement is extremely limited, there is presumably space for more, but it's not that we should do it just because we want to do it,” he told Science|Business. He said some research lends itself better to having citizen input, and this usually tends to be on the applied end of the science spectrum where the public can offer useful feedback based on their experiences. He added that advising scientists on certain topics to study is also a useful approach, in the way that Latvia is doing. “The public does fund a lot of science, there's a lot of tax money going into this. We of course do want to preserve academic freedom, but it's also not unreasonable to incorporate more feedback or input from citizens where possible,” he said. Related articlesCitizen science: where, when, and how to let the public contribute to researchHow can Europe cope with a flood of AI-assisted research grant proposals?Data Corner: Horizon Europe’s AI, digital and data call success rate is 5.2%There are several ways of involving citizens in science funding. The most minimal way is having a few representatives on a panel, such as members of a patient group or union. The most direct way is crowdsourcing funding for specific projects. There is an increasing number of online platforms that allow the public to chip in to support scientific proposals.Sauermann studied this in a recent paper and found that it can have its uses, but it still is not clear if there are benefits to it. There are various assumptions linked to citizen engagement, for example that it increases public trust in science, or that it provides a representative view of what the public thinks about science. These are not necessarily true, Sauermann found. People who participate in engagement activities tend to already be very trusting of science, and, on the whole, it is generally the well-off and well educated who contribute, giving a narrow view of public opinion. On whether citizen input can help manage the increasing number of proposals that are being submitted due to assistance from AI, Sauermann is more sceptical. “The obvious answer to the flood of AI-written proposals is AI-driven evaluation,” he said, adding that it doesn’t mean citizen engagement shouldn’t be a part of evaluations in a well thought-out manner. Southern Denmark’s successful approachOne successful example of citizen engagement in science evaluations was implemented in southern Denmark. Between 2019 and 2025, citizens in the region were invited to vote to fund one of five pre-selected projects in the field of healthcare. The project, called A Healthier Southern Denmark, was a collaboration between regional authorities, the University of Southern Denmark, and two media partners. Over the seven years, there were 75,000 votes and significant public engagement online and on social media. “It was a bit of a wild project, we’d never done something like that before and we were a bit nervous about what would be said in the media about it. But actually, people were very positive,” said Anne Kathrine Overgaard, one of the main organisers of the project from the University of Southern Denmark. The university and its researchers have learned a lot from the experience, particularly about engaging with society and shaping their research to match real-world needs. This is important with Europe’s increasing focus on competitiveness and bringing innovations to market faster, Overgaard said. She hopes to see more citizen engagement in evaluation processes and in science more broadly. “For many years, citizen engagement has been a bit of an add-on to proposals, just to check a box. But I think things are changing,” she said. It’s less about citizens just gathering data and more “about the dialogue between the public and the scientists,” she said. The initiative ended last year as the team wanted to regroup to find fresh momentum. The development of AI and AI-written proposals has made Overgaard reflect on how the project could be reworked to help evaluators. She hopes to bring it back in the future. “It could be a good idea to try this initiative again in a slightly re-worked format,” she said.
Science informs creativity at Camp Invention
LEAVITTSBURG — Children learning to use science and other skills to solve mysteries had the assistance of movable capybaras that they ...
War, sports collide as Iran's World Cup kicks off in Los Angeles
CBC News reported on the unchartered territory FIFA World Cup 2026 is finding itself in as members of Team Iran arrive in Los Angeles, inviting a divisive collision of geopolitics and sports in an area with a large Iranian diaspora. "You've never had two countries engaged in active military conflict matching up against each other, competing in the same tournament," said Salma Mousa, an assistant professor of political science and affiliated faculty with the Bedari Kindness Institute. Mousa, who studies the intersection of sports and conflicts, worries that a potential July 3 face-off between Iran and the U.S. in Texas might “increase tensions to kind of a cataclysmic degree.” Read more about UCLA in today’s Washington Times.
Yinming Shao named Downsbrough Early Career Professor of Physics
Yinming Shao, assistant professor of physics at Penn State, has been honored with the Downsbrough Early Career Professorship in Physics in recognition of his research contributions, teaching, and service to the Department of Physics and the Eberly College of Science.
OHIO students, businesses see benefits from participation in Export Internship Program
Ohio University’s participation in the Ohio Export Internship Program Is giving students real-world experience in international trade while also assisting a wide range of manufacturers in the Buckeye State.
WVPEC, WVU partner with Pittsburgh Penguins to take hockey-themed STEM lessons into classrooms
Elementary school students in West Virginia and Pennsylvania will soon explore science through the lens of hockey thanks to a new partnership involving the West Virginia Public Education Collaborative and the STEAM Technical Assistance Center, housed in the West Virginia University Office of the Provost, and the Pittsburgh Penguins Foundation.
Fund honoring late meteorologist to assist in global student experience
Jenni Evans, a world-renowned meteorologist whose research transformed the scientific understanding of tropical cyclones and strengthened storm forecasting worldwide, considered her students’ success her proudest accomplishment. The newly established Jenni Evans Fund in the Department of Meteorology and Atmospheric Science will ensure that those successes continue in perpetuity.
Montclair School Board OKs New Assistant Business Administrator
The Montclair Public Schools has a new assistant business administrator, and the school board is set to renew a contract with its interim school business administrator on Wednesday.
Department of Health and Human Services Digital Stockpile & Manufacturing Response Network Challenge
NASA’s Center of Excellence for Collaborative Innovation (CoECI) assists in the use of crowdsourcing across the federal government. CoECI’s NASA Tournament
NASA’s Quantum Lab Aboard Space Station Gets Chilly Upgrade
Upgraded hardware will allow the Cold Atom Lab to set new records in quantum physics and help develop new technologies.
'Clarke to drop Shankland for Christie or McLean'
If we rewind 36 years to 16 June 1990 and the Italian city of Genoa, Stuart McCall was busy scoring to help Scotland secure a 2-1 win over Sweden. The former midfielder jokes that he "was always deadly from a yard out" and ultimately that victory wasn't enough to ensure Scotland progressed to the knock-out stage, but up until this weekend, it was their last win at a World Cup finals. Now the 62 year-old is assistant to Paul Heckingbottom at Preston North End, but he's also enjoying absorbing all the action from the United States, Canada and Mexico.
China offers staunch support to Myanmar president during his state visit
The two countries sign 18 cooperation deals, including on free trade and assistance in the event of natural disasters.
Swansea City to make Crystal Palace's Ben Stevens sporting director
Swansea City are set to appoint Crystal Palace assistant sporting director Ben Stevens as their new sporting director.
United States Announces U.S. Government Members of the U.S.-Uzbekistan Business and Investment Council
United States Announces U.S. Government Members of the U.S.-Uzbekistan Business and Investment Council Press Release June 16, 2026 Today, at the fifth annual Tashkent International Investment Forum (TIIF 2026), the United States announced the following inaugural members of the U.S.-Uzbekistan Business and Investment Council: U.S. International Development Finance Corporation (DFC) Vice President Bethany Aquilina Brez Export-Import Bank of the United States (EXIM) Senior Vice President Sarah Witten Assistant Secretary of Commerce, David Fogel Assistant Secretary of State for Economic, Energy, and Business Affairs, Caleb Orr U.S. Ambassador to Uzbekistan, Jonathan Henick Launched in Washington, D.C., in April 2026, the U.S.-Uzbekistan Business and Investment Council serves as the premier bilateral platform to accelerate trade and catalyze private sector investment between the United States and Uzbekistan. The Council is Co-Chaired by Special Envoy for South and Central Asia, Ambassador Sergio Gor and Saida Mirziyoyeva, Head of the Administration of the President of the Republic of Uzbekistan. The Council gives American businesses direct access to U.S. government financing, trade promotion, and market development tools to execute large-scale projects in Uzbekistan. Uzbekistan holds significant reserves of critical minerals essential to U.S. technology, defense, and energy sectors. The Council provides a direct mechanism to advance U.S. access to these resources through transparent, mutually beneficial partnerships. Through their participation, the American members of the Council will deepen the institutional framework for American commercial engagement in Uzbekistan.
Turner on Addressing Poor Mental Health Outcomes of Black and Latino Boys
Assistant professor of social welfare David C. Turner III argues that still more needs to be done to address the structural issues impacting the mental health outcomes of Black and Latino boys
Damien Perrinelle set to be named Red Star manager
Former AS Monaco assistant manager Damien Perrinelle is set to take charge at Ligue 2 side Red Star, L’Équipe understands.Perrinelle, who previously managed Monaco’s academy side, was integrate...
💪 Dream World Cup debut! Gyökeres is making history tonight
The Swedish forward is destroying any trace of nerves in his World Cup debut. In less than sixty minutes, he delivered his first assist and scored his first goal in football’s biggest competition. ...
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
U.S. DOJ continues elections investigation, fight to audit California’s voter rolls
First Assistant U.S. Attorney Bill Essayli said there is evidence of voter fraud as his office continues its investigation into the state’s election.
California Politics 360 full episode | US Justice Dept. continues elections investigation
On California Politics 360, Ashley Zavala sat down with First Assistant U.S. Attorney Bill Essayli, who is leading the investigation.
SBA moves to revise 8(a) rules while preserving tribal, ANC eligibility
Details By Brian Edwards Native Contracting June 13, 2026 The U.S. Small Business Administration has proposed changes to its 8(a) Business Development Program that would eliminate race-based presumptions of social disadvantage for individually owned businesses while leaving eligibility standards unchanged for tribally owned enterprises, Alaska Native corporations and other Native entity-owned participants. In both the title and summary of the proposed rule published in the Federal Register, SBA emphasized that the changes only apply to individually owned firms and “do not impact entity-owned firms,” including tribes, Alaska Native corporation, Native Hawaiian organizations and community development corporations. The proposed rule, announced June 11, would require all individual applicants seeking admission to the 8(a) program to submit evidence demonstrating social disadvantage. Membership in a racial or ethnic group alone would no longer establish eligibility, according to the SBA. For Indian Country, the agency said eligibility standards for businesses owned by federally recognized tribes, Alaska Native corporations, Native Hawaiian organizations and community development corporations would remain unchanged. The proposal comes after the Department of Defense reaffirmed that participation by tribes and Alaska Native corporations in the 8(a) program is based on their political status under federal law rather than diversity, equity and inclusion initiatives. In a May 28 letter to Alaska's Republican Sens. Lisa Murkowski and Dan Sullivan, Under Secretary of Defense for Acquisition and Sustainment Michael P. Duffey wrote that participation by federally recognized tribes and Alaska Native corporations in federal programs is “grounded in their political status as Native Americans, not DEI initiatives.” The SBA proposal follows a 2023 federal court ruling that found unconstitutional the program's rebuttable presumption that members of certain racial and ethnic groups were socially disadvantaged. SBA Administrator Kelly Loeffler said the proposed rule would establish a single standard for individually owned applicants by requiring evidence of social disadvantage. The 8(a) Business Development Program provides participating firms with business development assistance and access to federal set-aside and sole-source contracting opportunities. The program remains a major source of federal contracting revenue for tribal enterprises and Alaska Native corporations. Native-owned firms received $16.1 billion of the program's approximately $26 billion in federal contract awards during fiscal 2024, according to data previously reported by Tribal Business News. The proposal also arrives amid ongoing concerns from Native contractors about SBA administration of the program. In May, the Native American Contractors Association and 53 Native-owned businesses urged SBA to address delays in processing 8(a) applications, saying some reviews had stretched beyond regulatory deadlines and appeared to have stalled since August 2025. The proposed rule is open for public comment through July 13. The Federal Register notice does not reference tribal consultation or indicate whether SBA determined consultation was unnecessary because tribal eligibility standards are unchanged. The SBA has not announced when the proposed rule would take effect. The agency is expected to accept public comments before issuing a final rule.About The AuthorAuthor: Brian EdwardsBrian Edwards is associate publisher and associate editor of Tribal Business News and Native News Online. He is a longtime publisher, editor, business reporter and serial entrepreneur. Subscribe Today!Other Articles by this authorDefense Department reaffirms tribal, ANC eligibility in SBA 8(a) programTribal heritage projects eligible for up to $100K in federal funding through NPS programIHS launches tribal long-term care construction initiative with three projectsIḷisaġvik College acquires site for long-planned Utqiaġvik campus This article is available to paid digital subscribers. Click here to sign in or get access.
Department of Veterans Affairs stops LGBTQ+ veteran support
Internal VA guidance obtained by The Advocate raises questions about the future of specialized assistance for those who served.
Trump prosecutor in L.A. is searching for voter fraud before final count
First Assistant U.S. Atty. Bill Essayli is waging an unusual campaign to find election fraud in California despite DOJ guidelines saying not to during vote counting.
Vikings hire Andrew Healy, Trent Kirchner as assistant GMs
The Vikings are hiring Andrew Healy and Trent Kirchner as assistant General Managers under new General Manager Nolan Teasley, Alec Lewis of TheAthletic.com reports.
FDA clears new computer-assisted device for removing clots in stroke patients
The Thunderbolt device from California-based Penumbra uses modulated aspiration to detect and remove blood clots. Back in January, Boston Scientific agreed to acquire Penumbra for approximately $14.5 billion.
Essentia Health-Duluth Clinic welcomes Sabrina Ratsamy to practice neurology
Sabrina Ratsamy, a certified physician assistant practicing neurology, is thrilled to join the Essentia Health-Duluth Clinic.
Overview of WHO Member State Interventions at WHA79 on Women’s, Children’s and Adolescents’ Health (WCAH)
WHA79 highlighted a critical turning point for women’s, children’s and adolescents’ health (WCAH) amid record declines in development assistance, growing humanitarian crises and ongoing reforms of the global health architecture. PMNCH advocated for WCAH to remain central to health system reform, emergency response and financing discussions, emphasizing that sustainable investments, country-led governance and protection of essential services are vital to prevent reversals in hard-won health gains and accelerate progress toward the SDGs.
Tomb Raider: Legacy of Atlantis developers used gen AI to get "the right answers faster", Crystal Dynamics explains
Tomb Raider: Legacy of Atlantis developers Crystal Dynamics and Flying Wild Hog used gen AI to create placeholder assets to assist with visualisation.
Disability rights organizations challenge N.Y. medically assisted suicide law
The organizations claim that people with life-threatening disabilities belong to a protected class and are at risk of harm if the law goes into effect.
Time for an AI checkup: Flaw found in machine learning for sepsis treatment
Shengpu Tang, Emory assistant professor of computer science, found a flaw in many peer-reviewed studies using the AI method known as reinforcement learning as a theoretical guide for the treatment of sepsis.
Using AI for medical advice; pelvic floor exercises; the hidden dangers of burning incense; plus other stories with Vanderbilt Health sources
Colin Walsh, MD,Associate Professor of Biomedical Informatics, was on WTVF News Channel 5‘s “Morningline” show in an interview about whether or not it is safe to use AI for medical advice. Time magazine reporter Stacey Colino interviewed Elisabeth Sebesta, MD, Assistant Professor of Urology, for a story about pelvic floor exercises for issues including menopause, erectile dysfunction and urinary incontinence in men. “Each Breath,” published by the American Lung Association, quoted Brian Christman, MD, Adjunct Professor of Medicine, for a story about the hidden dangers of burning incense. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Healthline (low vaccination rates lead to more cases of measles, whooping cough and other preventable diseases); ABC News (U.S. measles cases surpass 2,000 for second year in a row); and CIDRAP News (high-dose flu shots cut rates of hospitalization in older adults). Sarah Rohde, MD, Associate Professor of Otolaryngology-Head and Neck Surgery, was quoted in a People magazine story on patient Makalii Andrade, a surfer from Kauai Island who suffered a serious neck injury in 2022 and recently underwent surgery at Vanderbilt Health to begin the final phase of his recovery. James Crowe, MD, Director of the Vanderbilt Center for Antibody Therapeutics, for a piece in Nature about antibodies against a strain of Ebola. SFGATE reporter Gillian Mohney interviewed Xue Zhong, PhD, Research Assistant Professor, Division of Genetic Medicine and Clinical Pharmacology, for a story about a study of a blood test looking at Alzheimer’s disease biomarkers. Matthew Franklin Mart, MD, Assistant Professor of Medicine, was quoted in a Healio story about how inflammation and illness severity is linked to less cognitive resilience after a person has been an ICU patient. The “How We Really Feel” podcast host Sula Windgassen, PhD, interviewed Lindsey C. McKernan, PhD, MPH, Associate Professor of Psychiatry & Behavioral Sciences, Physical Medicine & Rehabilitation and Urology, for an episode focusing on pelvic and bladder health. The podcast is also available on YouTube and the podcast website. In addition, podcaster Monica Sanford interviewed cardiologist Mark Glazer, MD, for her podcast “The Monica Sanford Show”; the two-part interview is here and here.
AI-Generated Microdramas Are Real — and Thriving Under Our Noses
Vertical-first platforms are proving that human-assisted AI production is a commercially viable engine for mobile entertainment
AI-Generated Microdramas Are Real — and Thriving Under Our Noses
Vertical-first platforms are proving that human-assisted AI production is a commercially viable engine for mobile entertainment
UTRGV Sports Medicine Adds Muteba Dikanda as Assistant Athletic Trainer
RIO GRANDE VALLEY – The University of Texas Rio Grande Valley (UTRGV) Department of Intercollegiate Athletics announced the addition of Muteba Dikanda as an Assistant Athletic Trainer.
Bypass Siri AI Waitlist on macOS 27 Golden Gate Beta: Here's How
If you installed the macOS 27 Golden Gate developer beta and have signed up to the Siri AI waitlist but are still waiting to be accepted, there's a Terminal command workaround that enables the new virtual assistant on your Mac immediately. If you're still reading, since you're on the first macOS 27 developer beta, we're assuming you are running it on a test machine, and not on your primary Mac. We're also assuming you're comfortable with using the Terminal app.
Transfer market approach and Elland Road redevelopment
Raj asked: Where do you think Leeds will strengthen this summer, and who do you think will be sold to assist financial regulations? Adam: I think there will be an attempt to retain the key talent, which has started with captain Ethan Ampadu's new four-year deal. Also, from the recent discussion with chairman Paraag Marathe, there seems a real positivity that manager Daniel Farke will be staying beyond the existing year of his contract.
New OMB rule could break science in the United States
The drug that saved your mother. The treatment your doctor recommended. The clinical trial that bought someone you love more time. None of it was inevitable. It required a system built to operate outside politics and sustained over decades, because science doesn’t operate on the timeline of a politician. That system is now under direct threat. The Office of Management and Budget (OMB) has proposed a new rule to regulate all federal grants, not just science, but housing, education, defense, NASA and everything in between, that would fundamentally change how research is conducted in the United States. There have been a lot of fires in the past 16 months, and if everything is an emergency, nothing is an emergency. But this is a very big deal. These rules would strip away the independence that has kept science from becoming a political tool. The good news is there’s still something we can all do. How the grant system was designed to work When I was a new faculty member, I was full of millions of ideas, so I sat down and wrote an NIH proposal. I worked on it for months and thought it was so good. Then I sent it to my mentor. It came back covered in comments. Places where my reasoning wasn’t as airtight as I’d thought, methods that could be stronger, gaps in my thinking that I had been too close to the work to see. It stung, as honest feedback always does, but peer review almost always makes the work better. In fact, it’s the backbone of how American science has functioned for generations. At NIH, submitted proposals go to a panel of scientists who have experience in the field. These are the people who can read research methods and spot their weaknesses, who understand when an experiment is designed well and when it isn’t. Applications are scored rigorously, and often only the top 3-20% of proposals receive funding. The people making funding decisions are required to justify them based on these reviews. To be clear: this is not a perfect system, and good science still goes unfunded more often than any of us would like due to limited resources. There is also criticism that peer review may undervalue bold ideas that are risky but could have high payoffs. But the peer review system is nonetheless a meaningful part of the grant selection process. While thoughtful and careful changes could improve the system, the changes being proposed by OMB will not make things better. The rule that could change everything Through this OMB proposal, the system that helps decide what gets funded is being dismantled. There are many troubling elements buried in this proposal, but three provisions stand out in particular. Each would be damaging alone. Together, they would change what kind of science gets done in America, and who it serves. 1. Political appointees would decide which science gets funded, and peer review would be explicitly sidelined or ignored. The guidelines your doctor follows, the standards that determine what’s in your air and water, the drugs that get approved for your family: all of it starts with a funding decision. Right now, that decision is made by scientists who can evaluate whether the work is actually sound and whether it could move the needle forward. Under this proposal, funding decisions could be made by political appointees. The careful, expertise-driven review process that shapes grant funding would be effectively sidelined. That means that a poorly designed study could get funded simply because someone in a political office liked the sound of it, while rigorous, important work doesn’t get funded because it no longer aligns with the administration’s priorities. In other words, critical work that benefits all of us could now be missed just because it has become politically inconvenient. 2. Grants could be canceled at any point, without warning, in the middle of ongoing work. Say your tax dollars have been paying for a cancer study for two years. The grant was awarded for five years, so the team is mid-experiment. There are three additional years’ worth of answers that could change how the disease is treated for hundreds of thousands of people. With this new rule, the federal government could cancel the remaining funding tomorrow, walk away from the commitment it made with your money, and have no legal obligation to finish what it started. This is a huge waste of money. There are rarely other sources of funding for this work, which means the team, the graduate students, postdocs, and research staff who have dedicated years of their careers to this project could lose their jobs. Patients who have contributed their time to studies may not see it turn into useful learnings for others. Every hour of work already completed could result in nothing useful. Science can take decades to get to tangible outcomes. It needs a stable funding system to flourish. 3. Researchers would have a harder time communicating their findings without pre-approval from the federal government. There is a saying from Sir Mark Walport: “Science isn’t finished until it’s communicated.” Science is no use to anyone if it is kept locked away in the labs that produced the data. The proposed rule could make communicating research findings harder in a number of ways: Make it harder for scientists to widely share their findings in scientific journals. Publication costs, including journal fees that allow for broad public access, could not be paid for by federal funds which is often how scientists pay these costs. Restrict researchers from engaging publicly about how their findings should inform policy or public health guidelines. This would restrict scientists from doing the work that transforms years of lab work into decisions that actually affect people’s lives. Make it harder for scientists to attend conferences. Conferences would now need to be approved by the federal agency at the time of grant award. This disadvantages conferences or publications that are not politically aligned. Conferences are a key way in which scientists learn about work happening in their field so they can collaborate and build on each other’s findings. What good is science with a muzzle? The long-term impact These changes could (and hopefully would) be reversed under the next administration. But by then, damage has been done. Once projects are halted or denied funding by political appointees, people leave their science careers for other paths or even leave the country to do their amazing science elsewhere. You cannot pause a scientific study the way you pause a subscription you decided isn’t useful anymore. You cannot freeze a research team that depends on salaries to feed their families, causing a scramble for replacement funding that, in most cases, simply does not exist. When the money stops, everything stops, and all the work in progress and its potential are lost. Despite all of the language about reducing waste, fraud, and abuse, this new proposed rule increases the administrative burden tremendously. Every researcher watching this unfold will make a rational decision: don’t start anything that will take a decade to finish. This includes not building a team around funding that could vanish, or asking the big questions that need patience and stability to answer. The most consequential science, the kind that produces the treatments and the breakthroughs that reach your doctor’s office twenty years from now, is exactly the science that would be abandoned first. This is still a proposal, so we can all do something Some worry this rule is already a done deal. But by law, OMB is required to open a public comment period. Those comments matter because they inform members of Congress, they can be used in litigation, and they create a public record. So here’s what you can do: Submit a public comment. The public comment period on this proposed change is open until July 13. Anyone can submit a comment, and OMB is required to respond to substantial ones. Each comment must be different to count as distinct; identical comments will be counted only once. Comment as an individual, not on behalf of your organization. Here’s a full resource to help you, with useful examples, but in general: Share a story about how science or federal funding has benefitted you or is involved in your work. Are you or someone you loved a cancer survivor? Do you know someone with Alzheimer’s? Have you received NIH/NSF or other federal funding? All of these can be stories you use to highlight why you care. Explain why you’re worried about these proposed changes. You can use the wording found here or in other resources to help you. Ask them to withdraw this proposed rule. Contact your elected representatives. Congress allocates money to federal agencies to spend, and it has oversight of how that process works. You can let your representatives know this proposed change concerns you and ask them to intervene. There are levers they can push that can help at this moment. Let others know why federal funding matters. This isn’t just about science, but ALL federal grants, including for education systems, defense projects, and more. The process, including the importance of federal funding, is invisible to many. We can all make it more visible by sharing how science benefits us and why we value it. You can also share this article, or any of the resources linked here, to help spread awareness! Bottom line We are quickly losing ground in scientific research in the U.S. More changes, like the proposed rule by OMB, would decimate our ability to conduct research here, leaving us all worse off: fewer treatments for pancreatic cancer, less research on pollution impacts, fewer answers for patients with rare disease, and more unaddressed health needs. The impact will be very real for all of us, regardless of where we stand politically. Using our voices for science is more important than ever. Love, LM Big thanks to Dr. Megan Ranney for reading this over and providing brilliant insights, as always. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective at YLE and a science communicator and immunologist working at the intersection of public trust, science, and public health. You can find her on Substack, LinkedIn, Instagram and Threads. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “Translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
2025-26 Season in Review: Brett Kulak
Vitals Player: Brett KulakBorn: Jan. 6, 1994 (32 years old)Height: 6-foot-1Weight: 192 poundsHometown: Edmonton, Alberta, CanadaShoots: LeftDraft: 2012 NHL Draft, fourth round, 14th pick (105th overall) by Calgary Flames2025-26 Statistics (with Pittsburgh): 25 games played; one goal; six assists; seven pointsContract Status: Entering unrestricted free agency on July 1 after completion of a four-year, $11,000,000 contract […]
McKinsey consultants use AI to lessen their reliance on PowerPoint
Louis-Charles Généreux, a McKinsey consultant, built an AI-assisted website to manage his consulting project and effectively replace PowerPoint.
SBIR Advance: $675,000 in state matching grants advance 7 innovative small businesses
MADISON – Seven small businesses in Wisconsin will receive up to $675,000 to commercialize their innovations, thanks to the SBIR Advance program’s latest round of funding. The state matching grant program provides assistance to companies in the process of completing a project...
Drury chemistry professor lands $450,000 research grant from the National Science Foundation
SPRINGFIELD, Mo., June 9, 2026 – Drury University Assistant Professor of Chemistry Dr. John Kiernicki has received a $449,297 research grant from the National Science Foundation (NSF) for the study […]
Apple's New AI Models Contain 'None' of Google's Gemini Assistant
Apple executives have detailed the architecture of the company's new Apple Foundation Models (AFM) and clarified exactly how Google's technology factored into their development.
What smart people are saying about Apple's slew of AI announcements
Tech industry leaders are weighing in on Apple's AI updates across its ecosystem, including on Siri, call assistance, and photo editing tools.
What smart people are saying about Apple's slew of AI announcements
Tech industry leaders are weighing in on Apple's AI updates across its ecosystem, including on Siri, call assistance, and photo editing tools.
Jeffrey Epstein’s longtime executive assistant to testify on Capitol Hill
We can create the future of science right now
Paul Litvak is the founder and Executive Director of the Robyn Dawes Institute and a Visiting Scholar at UC Berkeley. He has a PhD in Behavioral Decision Research from Carnegie Mellon where he studied emotions and the sunk cost bias. Over 15 years in industry, he solved a wide range of challenging technical problems. At Meta he created models optimizing the ad review process. At Google he ran experiments to measure social influence. At Airbnb, he was a product manager leading machine learning teams optimizing search ranking and price suggestions. He also co-founded and led product at Rhythmic Health, a venture-backed biosensing startup, creating an accurate low cost system using a color changing strip and a smart phone to measure salivary lactate. The bottleneck At this point, it is uncontroversial to say that science needs to stop using the PDF article as the unit of knowledge and currency. The unbearable slowness of scientific publishing, the profit motive and margins: I’m not saying anything new. The PDF also sucks because it’s hard to extract structured information, which makes it hard to do evidence synthesis. As a result, we do much less evidence synthesis than is needed. And evidence synthesis ultimately undergirds most policy and medical decision-making. I can see second-by-second real-time odds for any sporting or newsworthy event, but a school board can’t see the best evidence on whether their 8th graders should be taught algebra. As a society, we don’t treat this as an important problem. Again, not controversial. Not only is the problem well understood, but the solution has already been laid out. What we need is AI-assisted living evidence synthesis - (1) an open knowledge graph of atomic claims, (2) claims linked to evidence, (3) assessment and synthesis of each piece of evidence, and (4) continuous updating with new data. What few realize (yet) is that the technical capacity to build this vision for a significant portion of science already exists. Not only that, scientists and startup teams are already building many of these components. I know this because I’ve been surveying the space and talking to many of the builders. There are some missing pieces: for example, evaluations of how well some of the components work. But at this point, most of what’s missing is a fully end-to-end working integration of all of these parts. In the rest of this essay, I’m going to lay out all the parts of a working living evidence layer for science and who is working on them, and propose concrete next steps for building this system. What’s now possible The diagram above outlines the components of a living evidence synthesis platform, including some of the teams working on each component1. Scientific PDFs are processed into claims with associated evidence. The evidence is subjected to a forensic audit, methodological evaluation and robustness and reproducibility checks. Finally it’s given a weight in a continuously updating synthesis. What follows is a description and status of each component and a few of the teams working on them. Document understanding The first thing you need to be able to do is turn an article into structured data. Mostly that means parsing PDFs. There are often multicolumn layouts that confuse non-specialized PDF to text processing libraries. For scientific papers, there is the added complexity of parsing formulas and tables and figures. This is a really hot area - there are startups offering APIs, and it seems like a new open source package gets posted to Github every few weeks. What follows isn’t exhaustive. A package called GROBID was the state of the art for a while, they didn’t update their package for nearly two years until very recently. In the meantime reducto.ai released an AI powered PDF extraction API, PaddleOCR became popular, IBM released a model called Docling, and both Mistral and Gemini created models and libraries. I also know of at least one other well-funded psychology research group working on a paper parser. By contrast, there are few open evals in this space, with no extensive evals for complex table comprehension in particular. Nonetheless, I’m confident this will be a solved problem soon, given the combination of LLM advances and developer interest. Hypothesis level extraction There has been increasing interest in comprehending the extracted text of papers and linking information to evidence for each hypothesis. A lot of work has already been done. Trialstreamer (Marshall et al. 2020) and RobotReviewer LIVE (Marshall et al. 2023) demonstrated automated extraction of trial population, intervention, and outcome at scale on clinical RCTs. PaperQA2 (Skarlinski et al. 2024) and Ai2 ScholarQA (2024) extended this to retrieval-augmented question answering with citation grounding. Elicit, Consensus, and SciSpace operationalized claim-level extraction for end users. OpenEval (Booeshaghi et al. 2026) is the most recent and most ambitious: 1.96 million atomic claims extracted from 16,087 eLife manuscripts using Claude Sonnet 4.5, grouped into ~299,000 results, with LLM evaluations showing 81% agreement with human peer review on a 2,487-paper subset. None of these solutions link claims to test-statistics, as you would need to evaluate randomized controlled trials. This is why I built the evidence.guide API - to extract hypotheses and associated test statistics from behavioral science papers. The best public eval of this kind of extraction I’m aware of comes from the recent SCORE project - they had humans code thousands of psychology papers to extract their claims by hand. It would be extremely helpful to the world if all scientific PDFs were available as structured open data. I’ve been working to make this happen, both directly at Berkeley and through coordination with large entities I can’t yet speak of; as hard as it is to do, I think it’s possible2. Forensic audit A lot of work has been done on forensic audit, but some gaps remain. Of course, for biology papers that rely on images for evidence, there are a variety of tools (notably Proofig and ImageTwin) to spot anomalies. These are still well short of what sleuths like Elizabeth Bik can do on her own, but these tools are constant companions among fraud analysts. There’s someone working on auditing Excel files for anomalies, and a number of teams are automating numerical checks like GRIM and SPRITE, including Scrutiny project, the INSPECT-SR team as well as statcheck. The regcheck team is building a way to use AI to compare preregistrations to analyses in papers, to ensure there aren’t significant deviations. Nonetheless, there are many other kinds of anomalies to screen for, both public and less publicly known. And there are no formal evals for anomaly detection that I’m aware of. Still, there’s a lot to draw from in this space and I’m pretty certain we will be able to scan papers for most kinds of obvious anomalies in the near future. Methodological review This area has been white hot, though I fear for many of the startups in this space, because this capability may become commoditized. There are at least six different AI peer review companies, including Refine.ink, Reviewer3, ReviewerZero.ai, Q.E.D. Science, Paper Wizard, and Isitcredible. Coarse (a pun on refine) was also recently created as an open source alternative. These systems provide qualitative feedback on the content of papers, spotting methodological weaknesses and mathematical errors. They seem to work pretty well, and many academics report bitterly that they exceed the average quality of typical peer reviewers. But there are few evals here either. What evals exist so far involve using LLM-as-judge (circularity problems abound) or comparing against human reviews of questionable quality. What you’d ideally want is an eval that measures capturing known errors in papers3. Reproducibility and robustness Another active area has been using AI agents to automate computational reproducibility4 and robustness5 checks in papers that report numerical results. For more recent papers where data and code are available, AI agents can see whether they can re-run the analyses and produce the numbers reported in the published paper. In addition to a handful of individual academics who have been experimenting using Claude Code for this, the Institute for Replication is a leading group working on building an end to end system. The evals related to this problem are the most mature, with CORE-Bench (Siegel, Kapoor, Narayanan 2024) and PaperBench (OpenAI 2025) available to benchmark agents on this task. There is also work on getting AI agents to test alternative ways of analyzing the data to ensure the results are robust to small analytic design choices. Synthesis This is the most underdeveloped area where significant investment is required. Although some automated evidence synthesis systems exist — for example, otto-sr is building an AI agent to write systematic reviews — none of these incorporate the full range of paper level signals to weight evidence appropriately. Nor is there anything like an eval or a gold standard for a good systematic review. Arguably Cochrane reviews are the closest we have to gold standard human systematic reviews, though I’ve heard academics in the know complain about their uneven quality. A key question for a synthesis platform is how to weight anomalies and methodological issues in assessing the quality of a piece of evidence. This is an unsolved problem and one I’m very keen to work on. Continuous updating There are many pieces of basic infrastructure available for monitoring for new research and initiating updates. OpenAlex is the current open citation graph. Retraction Watch integrated into Crossref in October 2023. Scite tracks how citations support, contrast, or mention prior claims. The Living Evidence Network demonstrated continuous-update workflows in clinical guidelines. Engineering this is a relatively straightforward task. When you look over this technical architecture and all the progress being made, it’s hard not to be optimistic that a living guide to scientific evidence will be built. The stakeholders are ready The social infrastructure for this is starting to coalesce — it’s not just a pie in the sky academic exercise to imagine this coming into existence. Institutions like the Center for Open Science, the Institute for Replication, the INSPECT-SR, the Living Evidence Network and more are all working on scaling work to improve research quality. Funders are also aligned. The Sloan Foundation has funded living evidence work through COS. Coefficient Giving supports the Institute for Replication and COS. The Astera Institute and the Institute for Progress have shown interest in this space. NIH has established an Office for Replication and Reproducibility. Although there are (very unfortunately) serious headwinds in science funding generally, there is an active group of funders interested in metascience. A brief word about what I’ve been doing at RDI. First, as a Visiting Scholar at Berkeley I’ve been actively figuring out how a non-profit and a public university can conduct and make public the results of large-scale academic article data mining. With some of the money I raised from donors, I commissioned a legal analysis of recent case law and publisher text data mining (TDM) agreements in order to understand whether a massive open data mining of academic articles is possible (with caveats, it is). I’ve also been working to bring together stakeholders in this space, and identify gaps. I’ve also been doing some software development in this space, with more to come. A pilot proposal The assumption undergirding all of this is that an AI, given all this information, would make the right judgment about a scientific claim with lots of conflicting evidence, weighing all the factors appropriately. That’s the hypothesis we need to test. Randomized control trial research is the best place to focus on first. RCTs are used to make many of the important decisions in society - from medical trials to public policy changes. And they use a relatively uniform set of inferential statistics with lots of known and available diagnostics. Behavioral science experiments, within the broader realm of RCTs, should be first used as a testbed whose results can be generalized. Because behavioral science is at the vanguard of open science practices, replications abound (there are thousands of them) to serve as ground truth training data. Key Hypothesis Therefore the pilot would test, in behavioral RCTs that have been replicated, whether the quality of evidence for a claim can be used to accurately predict whether that claim will replicate. Secondary Hypotheses Compared to claims that replicated, non-replicated claims demonstrate a greater share of forensic anomalies in their source literatures. Hypothesis level claim and statistic extraction is accurate enough to scale living evidence without onerous human review costs. Replication prediction is more accurate than prediction markets6 or journal prestige. If all the different quality signals we gather do accurately predict which studies will replicate, then we can use that model to score evidence to power the living evidence layer. Why this is informative regardless of outcome If the pilot succeeds, the architecture extends to medical RCTs (where Living Evidence already operates and integration is mostly about claim representation), then to slices of basic biology with stable replication structure. If it fails, the field learns which quality signals are load-bearing and which ones metascience has oversold. Either result is a contribution to knowing what the literature supports. Implications for funders Because this burgeoning ecosystem of builders already exists, a well-informed philanthropic or government funder could play a crucial catalyzing role in bringing this future about. They could play at least three roles: creating open structured datasets, publishing open benchmarks and incentivizing the solving of key technical challenges. First, open archives of papers that the government maintains, like PubMed, could be turned into structured data amenable to large scale metascience and claim aggregation. I know the US government already has an interest in doing this, though some key open questions remain unanswered. How do you determine the best models and systems for accurately extracting information from papers? How can you establish a robust way to allow researchers to flag errors and correct them? And finally, how do you create a legal regime in working with publishers to maximize the scope of available papers? For the latter, a university or a private philanthropy may be better positioned to make structured data publicly available under journal subscription terms or fair use. Philanthropists or government funders could also coordinate to create or commission benchmarks that evaluate whether important problems have been solved. For example, an open benchmark for claim extraction from a range of different scientific article types would be extremely helpful. Ensuring the underlying data are accurate is vital for creating these evaluations. I’ve discussed opportunistically using various human-created datasets for this purpose, but a consistent problem is that errors in human data make it difficult for them to serve as a gold standard. Finally, with structured data and benchmarks available, the government or private philanthropy could use them to incentivize groups to develop machine learning systems that meet these benchmarks. Prizes are one potentially valuable tool for this. For example, you could establish a prize for a system that accurately updates a living meta-analysis for a small set of claims. Prizes are particularly useful as signals of problem importance, and can help create vibrant ecosystems of public and private research—see, for example the role the government played in kickstarting the current work on nuclear fusion. Conclusion The drawbacks of the current scientific publishing system are known. Scientists agree, metascientists agree, philanthropists agree: the published PDF plus citation graph isn’t the right substrate for maintaining a representation of the evidence base in science. The pieces needed to build the alternative either already exist or are rapidly taking shape. The community is forming around exactly this problem, with concrete partnerships and shared infrastructure. A pilot should start on behavioral science RCTs because that’s the slice of empirical science most amenable to legibility, where replication ground truth is richest, and where the failure modes are best documented. What’s been missing is the galvanizing mission to assemble these pieces into something that works. That’s what I’m proposing to build. *** 1 I have a broader field map that I’ll release publicly soon. This is me, building in public! 2 If this is something that you are excited about, please reach out and talk to me. 3 More on this very soon too! 4 This tests whether, given the code and the data, you can get the same statistics as reported in the published paper. 5 This tests whether the results are the same as a paper’s given alternative analytical decisions in conducting the analysis (like outlier omission). Closely related is the idea of a “multiverse” where you come up with many different ways of answering the same underlying research question with the same data, and test whether the results hold in all those alternative methods. There’s been work on the latter as well. 6 Some of the replications, e.g. those from the SCORE project, had paired the experiments with forecasts from prediction markets. So we get to look at this for free.
US: Global Health Aid Tied to Harmful Conditions
The United States government is conditioning lifesaving health assistance on broad access to surveillance data and extractive rights to pathogen samples and data for pharmaceutical development.
Grants fund high-risk research on fungal disease and antibiotic resistance
Schwartz Research Fund Visionary Grants for faculty members in the life sciences aims to provide significant assistance for innovative, visionary research that opens an important new line of inquiry.
Tried assisting living for $7,000 but too expensive, bought small home
Lana Mountford, 74, moved from assisted living to a two-bedroom house due to rising costs, managing health issues with a part-timer caregiver.
Rangers Hire Ex-Bruins Coach For AHL Squad
Earlier this offseason, the Boston Bruins moved on from assistant coach Jay Leach, who had coached their defenseman for the last two seasons.
Saving Siri: After two years of stumbles, is Apple's AI moment here?
When Apple holds its developer conference at its Cupertino, California headquarters on Monday, the big draw will be a widely expected overhaul to Siri, the AI assistant the iPhone maker two years ago promised, but failed, to improve.
Saving Siri: After two years of stumbles, is Apple's AI moment here?
When Apple holds its developer conference at its Cupertino, California headquarters on Monday, the big draw will be a widely expected overhaul to Siri, the AI assistant the iPhone maker two years ago promised, but failed, to improve.