SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " location " 1,368 found 🔀 AI-powered Shuffle
All 'Unsupervised Science' FBC testing facility locations in Control Resonant
How to shut down all FBC testing facilities
October 2026 Satellite Puzzler
Your challenge is to tell us the location of the satellite image and why it is interesting.
Baptist Health to provide free flu vaccines at Goodwill locations this November
Baptist Health and Goodwill of Arkansas are teaming p to provide free flu shots to community members this fall.
Health Alert – U.S. Embassy Moscow, Russia (October 6, 2026)
Health Alert – U.S. Embassy Moscow, Russia (October 5, 2026) Location: Irkutsk, Russia Event: The U.S. Embassy is aware of press reports from the Irkutsk region of suspected pneumonic plague resulting in the death of an individual and of associated quarantine measures in, and closures of, hospitals in Irkutsk. We continue to track the situation closely. The U.S. government has limited ability to help U.S. citizens in Russia, especially outside of Moscow. U.S. government personnel may face additional restrictions for personal and official travel to specific regions due to health and security concerns. The State Department’s Level 4 Travel Advisory (Do Not Travel) for Russia remains in place and states U.S. citizens currently in Russia should depart immediately. U.S. citizens planning travel to Russia are again strongly advised not to travel to Russia due to risk of wrongful detention and security concerns. Actions to Take: S. citizens in the area should follow the guidance of local health authorities, avoid affected facilities, and seek medical care promptly if they develop fever or respiratory symptoms. Visit the CDC Page on Plague for additional information about the disease. Visit the CDC Travelers’ Health Page for Russia for country-specific health updates. Monitor your health for 14 days following travel if you traveled to an area experiencing the outbreak. Review the S. Embassy country page for general health information. Refer to the Embassy’s list of medical providers. Check with your travel insurance provider about medical evacuation options should you fall ill while overseas. Have a plan to depart in an emergency that does not depend on U.S. government help. Monitor local media for updates. Be prepared to adjust your plans. Enroll in the Smart Traveler Enrollment Program(STEP) to receive health and security updates. Assistance: U.S. Embassy Moscow, Russia +7 495 728-5577 MoscowACS@state.gov U.S. Embassy Moscow web page State Department – Consular Affairs (+001) 888-407-4747 or (+001) 202-501-4444 Russia Country Information Follow us on Facebook and Twitter State Department – Consular Affairs 1-888-407-4747 or 1-202-501-4444
Location Photo
Each week, on Wednesday, The Journal will post a location challenge photo on its Facebook page, encouraging followers to identify where said location can be found. This week, staffer Tom
Land sale for 324-unit downtown Sarasota apartment project called off
The cancellation of the sale of the 1800 block of Fruitville Road to an apartment developer isn't stopping plans for the Breakfast House-led move to a property 1 mile east of the current bungalow village location.
EB Games announces first ever Nintendo store-within-a-store in North America
Today, EB Games announced the first-ever Nintendo store-within-a-store experience in North America. The space will be located in the heart of Toronto. EB Games will open the Nintendo space at its flagship location at 267 Yonge Street. This is a permanent, 1,500-square-foot space that “will bring Nintendo games, characters and worlds together in a dedicated retail environment.” The new Nintendo...
Corktown pizzeria Grandma Bob’s to expand to West Village
Corktown spot Grandma Bob’s Pizza is expanding to a second location, taking over the West Village space vacated by Marrow.
Former Cocoa Beach classmates are now Orlando Health doctors. Photos
Former classmates from Cocoa Beach Jr./Sr. High, Dr. Anita Fazeli and Dr. Srividya Kannan will share an Orlando Heath location in Viera.
Planned Parenthood launches menopause care services in Dayton, Cincinnati locations
Planned Parenthood Southwest Ohio Region is launching a new service at its Dayton and Cincinnati locations for patients looking for relief from menopause and perimenopause symptoms.
Indoor playground Kid Mania closes Plano location
The indoor playground Kid Mania closed its Plano location on Chase Oaks Blvd. in mid-September, downsizing to its north Fort Worth location.
Webtoon Entertainment - Approves CEO Junko Kim's Relocation From Korea To U.S.
Webtoon Entertainment Inc NASDAQ:WBTN:
Champion Homes grows via another acquisition
Troy-based Champion Homes has acquired an Alabama-based manufactured housing company with nine retail locations around the south.
Chip City closes all locations amid economic challenges
Chip City, a New York City-based gourmet cookie chain, has closed all 22 remaining locations nationwide due to tough consumer spending and evolving preferences.
Your ballot, your move: Early voting starts Oct. 6
By Kevin Hendricks, nm.news — New Mexico voters can start casting ballots Oct. 6 for the Nov. 3 general election. There’s no reason to wait in line on Election Day, or to walk into the booth guessing. Early voting opens Oct. 6 at county clerk offices. On Oct. 17 it expands to more locations across […]
NWA C-Suite: Alan Wright
Under Wright’s leadership, Action Mechanical has expanded from two office locations to now having offices in Rogers, Jonesboro, Maumelle and Tulsa, Okla. Wright’s team includes more than 200 employees, $90...
Planet Fitness acquires Bakersfield’s Body Xchange Health Club locations
Body Xchange Health Clubs announced that they have been acquired by Planet Fitness.The announcement was posted on their social media pages.The company said that
Muchacho comes to Decatur; Kelly’s Market under new ownership
Muchacho, a West Coast-style taco shop with locations in Atlanta, plans to open its third spot in Decatur. The city will consider its alcohol license on Oct. 5, after police approval.
How do professional astronomers book time on JWST or Hubble?
Proposals are submitted annually by scientists who wish to use these facilities, and are reviewed by the Telescope Allocation Committee.
Permits issued for $22 million Perkins Road elementary school, new Southern Classic Chicken location
Here is a list of commercial and residential building permits issued by East Baton Rouge Parish Government from Sept. 28-Oct. 2.
oasisVRX Expands to the Princeton Area With New Active Entertainment Virtual Reality Destination
/PRNewswire/ -- oasisVRX is expanding with the opening of its second location at Princeton North Shopping Center, 1225 Route 206 in Princeton, New Jersey....
‘An anchor’: Oakshire fans celebrate, grieve as business prepares to shut down
Oakshire Public House has been a gathering space in the Whiteaker neighborhood since 2013 and holds many individual and community memories. Oakshire as a company is closing, but it plans to transition the Public House to a new company in the next two months, keeping the location open through the process.
Ticket Information
The Club has received an allocation of 2285 tickets, including 12 wheelchair bays and a number of tickets for ambulant fans.The wheelchair section is located in the home section of the Red Bull Arena....
IRGC General Warns Regional States against Letting US Use Their Territory
TEHRAN (Tasnim) – Brigadier General Ali Fadavi warned regional countries against allowing the US to employ their territories for operations against Iran, stressing that any location used as a launch point for attacks on Iran will be targeted.
The Roost expands with a third Reno location, introducing three different business models
Explore The Roost's expansion in Reno with its new locations on Robb Drive and in the ROC facility, plus a look back at its Booth Street roots.
CEO SUNDAY: Tropical Smoothie Cafe CEO says 'listening and learning' are keys to success
Max Wetzel said that staying close to franchisees, employees and customers has helped guide decisions as Tropical Smoothie Cafe has grown to nearly 1,800 locations.
Fiber arts guild plans demonstrations
Foothills Weaving and Fiberarts Guild will offer a basket workshop and public waiving and spinning demonstrations at two locations in Clinton.
Popular cookie chain abruptly closes all locations after years of rapid expansion
Chip City abruptly closed all of its locations after expanding from a New York cookie shop into a multistate chain backed by millions in outside investment
ESPN ‘College GameDay’ location announced for Week 6
ESPN's College GameDay has announced its location for Week 6.
Nebraska vs Maryland – Game Thread of Winning Fun!
Time: 3:00pm CST Location: Memorial Stadium, Lincoln, NE Surface: Hellas Turf (Blessed by the Bobfather himself in Husker Valhalla) Wagering Info: Huskers -14 1⁄2 . O/U – 52 1⁄2. Moneyline: Nebraska +116, Maryland +666 ($100 wager) (FanDuel) Series Record: Nebraska is 3-1 vs. Maryland all-time with all 4 games being played after the Huskers joined the Big 10. The last two games […]
How to watch the Texas A&M vs Arkansas game tonight
A pair of 2-2 teams that could desperately use a victory will meet tonight. Here's TV info, time, location and more for Texas A&M vs. Arkansas football Saturday
Business roundup: Restaurants and Halloween attractions coming to Columbia
The Missouri Nightmare Haunted Attraction, Sava — Modern Mediterranean, and a third Culver's location will land in Columbia soon.
Enter the Video Crypt, an art installation that brings the video store back from the dead
2014 was the year Blockbuster officially closed the doors of its last corporate-owned location, marking the end of an era for many who frequented video stores.
Rising costs, construction prompt pet store’s exit from Grand Rapids
A pet store and dog grooming business is shutting down its Grand Rapids location, citing rising costs, difficulties caused by construction in the area, and the changing character of the neighborhoo…
Modern Science: An Ohio University professor studies the mechanisms behind bats using echolocation
ATHENS, Ohio (WOUB) —There's a lot we know about how animals navigate their world, but there's even more we don't. This included how bats use echolocation until recently.Peishu Li is an assistan
164 slot machines seized in Sarasota County illegal gambling bust
The slot machines were taken from three locations in Englewood, officials say.
Gemini app gains new ‘Map’ tool, replacing ‘/’ with ‘@’
Google has introduced a “Map” tool to aid your location-based Gemini app prompts on Android and iOS. Meanwhile...
Gas station owner fined for deceptive business practices in Ocean County, NJ
County officials say they caught the owner advertising gas as one price on his digital signs, then charging a different price at three locations
Dutch Girl Donuts set to open New Center location
Dutch Girl Donuts is betting on New Center for its first expansion, which is slated to open next week.
True Religion to open its first Long Island location
True Religion is opening its first Long Island location at the Green Acres retail complex, joining Timberland and T-Mobile as new tenants in Valley Stream.
Coastal forces shape building sciences practice
When Built Environments relocated to Wilmington, the firm’s partners weren’t looking for the lazy tranquility one hopes for when on vacation. Instead, they sought sultry heat. They wanted to understand whipping coastal winds and punishing precipitation – the kind that tropical storms produce. That’s because how materials degrade can reveal a lot about how they can be improved. “We specifically chose the Wilmington market because it does fall within Climate Zone 3A, which is a coastal warm-humid climate,” said Jarrett Davis, who joined Built Environments in 2023 to lead the company’s building science practice. “There’s not a lot of product research in that climate zone, but there are a lot of structures here that get weatherized pretty severely.” Built Environments has provided building science, material testing and code compliance consulting for 25 years, ever since principal materials scientist Steve Doggett founded the company in Minnesota. “There are very few manufacturers that understand fully how their own materials and products work, whereas we know their shortfalls and their benefits out in the real world on jobsites,” Doggett said. “That’s why the original Built Environments was formed, to make buildings better.” He said the 15-employee company is just as comfortable on a jobsite, retrofitting a high-end beachside property, for example, as it is recreating some of the coast’s most intense weather conditions in the great indoors. The company operates an A2LA-accredited ISO/IEC 17025 mechanical testing laboratory on Wright Street. The year-old facility has expanded Built Environments’ in-house capabilities, Doggett said. “We’re able to simulate that hurricane wind (and) rain and perform structural and impact testing on wall assemblies, roof assemblies and glazing assemblies,” he said. “There are certain requirements that those windows and doors need to meet as far as wind ratings and pressure ratings and things of that nature.” Standard Glass Co.-Glass Depots, of Wilmington, is currently testing a new glazing system using Built Environments’ stress testing, the partners said. One method involves what’s called a “large missile cannon.” “We take 8-foot two-by-fours, and we shoot them at assemblies, so they have to withstand that impact,” Davis said. “It’s pretty cool to see, I’m not going to lie.” In many cases, the lab can run a full, wall-scale test of a product in a matter of weeks or months, whereas “it might take midrange manufacturers years,” Doggett said. “We’re nimble. We can cut that time in half.” The lab also develops intellectual property. Doggett, for example, shares a patent with Sustant LLC, of Minnesota, on a fastener patch to increase the air and water tightness within building envelopes. “We have too many ideas and not enough time,” he said. But the partners noted that they or their fellow principals – of which the company has four total, including a principal engineer and a principal codes and standards expert – could be anywhere on a given day, including in the courtroom providing expert testimony in contentious insurance cases. “Let’s say there is a fire on a structure,” Davis said. “We can analyze all the specific materials within that assembly – an exterior wall or something like that – because there are loads that require certain heat release. And so, we can measure each one of those materials, if need be, to say if this was likely or not a code-approved assembly.” Despite what can be inferred in a lab, the partners said nothing beats learning from how materials change over time under real-world strain. Take, for instance, the curious case of the creaking condo. “We recently had a customer that came to us trying to assess a sound issue of a roof. It was making noises that no one could explain or account for. How do you tackle something like that?” Doggett asked rhetorically. “There’s really no generally agreed-upon methodologies.” The problem turned out to be a faulty installation of a commercial roof system. “The building in this particular case was not local,” he said. “In the initial installation, the commercial roofing contractor installed the wrong fasteners in the wrong locations into the deck, and essentially the solar radiation was causing the building to move quite substantially early in the morning when the sun initially hit that assembly after a quite cool evening, causing the threads on the fasteners to kind of jump within the material, within the metal.” Built Environments designed an effective repair methodology that was within budget, the partners said. “We get the bizarre,” Doggett said. “I will say that’s something that has stayed the same over 25 years.” The partners said they are hiring, and that Cape Fear Community College is one of their main recruiting grounds. Davis and Doggett look for talented people who can understand traditional methodologies yet are open to on-the-job training and new understandings, they said. After all, it’s not just weather that can ruin a building. “My favorite saying is,” Davis said, “‘What are the eight most expensive words in construction? That’s how my daddy used to do it.’”
Coastal forces shape building sciences practice
When Built Environments relocated to Wilmington, the firm’s partners weren’t looking for the lazy tranquility one hopes for when on vacation. Instead, they sought sultry heat. They wanted to understand whipping coastal winds and punishing precipitation – the kind that tropical storms produce. That’s because how materials degrade can reveal a lot about how they can be improved. “We specifically chose the Wilmington market because it does fall within Climate Zone 3A, which is a coastal warm-humid climate,” said Jarrett Davis, who joined Built Environments in 2023 to lead the company’s building science practice. “There’s not a lot of product research in that climate zone, but there are a lot of structures here that get weatherized pretty severely.” Built Environments has provided building science, material testing and code compliance consulting for 25 years, ever since principal materials scientist Steve Doggett founded the company in Minnesota. “There are very few manufacturers that understand fully how their own materials and products work, whereas we know their shortfalls and their benefits out in the real world on jobsites,” Doggett said. “That’s why the original Built Environments was formed, to make buildings better.” He said the 15-employee company is just as comfortable on a jobsite, retrofitting a high-end beachside property, for example, as it is recreating some of the coast’s most intense weather conditions in the great indoors. The company operates an A2LA-accredited ISO/IEC 17025 mechanical testing laboratory on Wright Street. The year-old facility has expanded Built Environments’ in-house capabilities, Doggett said. “We’re able to simulate that hurricane wind (and) rain and perform structural and impact testing on wall assemblies, roof assemblies and glazing assemblies,” he said. “There are certain requirements that those windows and doors need to meet as far as wind ratings and pressure ratings and things of that nature.” Standard Glass Co.-Glass Depots, of Wilmington, is currently testing a new glazing system using Built Environments’ stress testing, the partners said. One method involves what’s called a “large missile cannon.” “We take 8-foot two-by-fours, and we shoot them at assemblies, so they have to withstand that impact,” Davis said. “It’s pretty cool to see, I’m not going to lie.” In many cases, the lab can run a full, wall-scale test of a product in a matter of weeks or months, whereas “it might take midrange manufacturers years,” Doggett said. “We’re nimble. We can cut that time in half.” The lab also develops intellectual property. Doggett, for example, shares a patent with Sustant LLC, of Minnesota, on a fastener patch to increase the air and water tightness within building envelopes. “We have too many ideas and not enough time,” he said. But the partners noted that they or their fellow principals – of which the company has four total, including a principal engineer and a principal codes and standards expert – could be anywhere on a given day, including in the courtroom providing expert testimony in contentious insurance cases. “Let’s say there is a fire on a structure,” Davis said. “We can analyze all the specific materials within that assembly – an exterior wall or something like that – because there are loads that require certain heat release. And so, we can measure each one of those materials, if need be, to say if this was likely or not a code-approved assembly.” Despite what can be inferred in a lab, the partners said nothing beats learning from how materials change over time under real-world strain. Take, for instance, the curious case of the creaking condo. “We recently had a customer that came to us trying to assess a sound issue of a roof. It was making noises that no one could explain or account for. How do you tackle something like that?” Doggett asked rhetorically. “There’s really no generally agreed-upon methodologies.” The problem turned out to be a faulty installation of a commercial roof system. “The building in this particular case was not local,” he said. “In the initial installation, the commercial roofing contractor installed the wrong fasteners in the wrong locations into the deck, and essentially the solar radiation was causing the building to move quite substantially early in the morning when the sun initially hit that assembly after a quite cool evening, causing the threads on the fasteners to kind of jump within the material, within the metal.” Built Environments designed an effective repair methodology that was within budget, the partners said. “We get the bizarre,” Doggett said. “I will say that’s something that has stayed the same over 25 years.” The partners said they are hiring, and that Cape Fear Community College is one of their main recruiting grounds. Davis and Doggett look for talented people who can understand traditional methodologies yet are open to on-the-job training and new understandings, they said. After all, it’s not just weather that can ruin a building. “My favorite saying is,” Davis said, “‘What are the eight most expensive words in construction? That’s how my daddy used to do it.’”
Columbia Health expands annual flu fair outreach to additional locations and day
Columbia Health expanded its annual flu fair this year, adding a second vaccination location and an extra day. Eligible affiliates have one day left of the four-day fair to stop by and get vaccinated.
Midtown Costco closes, set to reopen as business center in 2027
Shoppers packed Costco on Linwood Boulevard on Thursday as the Midtown location served its final day before closing and beginning its transition into a Costco Business Center.
New sports facility signals continuing growth in regional youth sports
Elite Sports Center in Loves Park had the grand opening of its secondary location this week, marking the newest component of a growing regional initiative to establish the Stateline area as a hub for youth sports.
Historic grocery business to close Little Chute location
The company calls it a tough decision, saying the older store would need major updates to compete with the large chains.
Latino Expo Resource Fair returns this weekend, in a new location
The Latino Expo cancelled its resource fair last year because of the political climate.
Ten bucks says you’ll love this community science project
Today marks the first day of Rut Watch 2026 With another season of Deer Spy in the books thanks to community scientists like you, biologists are now on a mission to pinpoint the peak of the white-tailed deer breeding season in Maine. Every observation of deer breeding behavior and sign helps define the timing of the rut, and this project uses the power of community science to collect deer data all fall long. Hunters, hikers, and wildlife watchers - Rut Watch pairs well with any outdoor adventure you have planned this season. It’s a perfect excuse to slow down and connect with nature as you look for clues. So get outside, rack up that deer data and submit rut reports from now through December 1. The online form is science made simple: Location Date and time Breeding behavior observed Submit a Rut Report What to watch for Active Breeding The most obvious breeding behavior to observe is a buck mounting a doe, but that is a rare sight as it only lasts a moment. You are more likely to witness a buck “tending” a doe, following closely, chasing, nuzzling, or pawing at her rump until she is receptive. Sparring After bucks shed their velvet, sparring helps sort out who is who in the dominance hierarchy. Early season matches are often less intense than later season matches between similar sized bucks. Most sparring is complete by the time breeding begins. Rubs Don’t just look for deer, pay attention to the trees. Rubs are marks made by bucks when they rub their antlers on trees, removing bark and leaving their scent calling card in the process. Scrapes Look to the forest floor for this sign of breeding season behavior. Scrapes consist of two parts - a licking branch, and a patch of cleared earth. Bucks break a low branch around head height, then paw at the leaves below to expose the dirt. Covered in scent, a scrape tells does and other bucks, “I’m here!” Learn More More information What’s next for deer community science: Northern Maine Wintering Deer Survey Other active community science projects: Fish Tag Reporting Maine Golden Eagle Study Maine Amphibian & Reptile Atlas Project Maine Deer Management: Maine’s Big Game Management Plan Game Species Conservation & Management Report The Benefits of Hunting: Supporting Wildlife, Conservation, and Community Subscribe Share Leave a comment
The sport is growing leaps and bounds with its focus on agility and balance.
The sport of Ninja Warrior is growing across the country and here in Southern California, with the opening of a new Ninja Academy gym in Ventura last month. Owner Madelyn Scarpulla opened her first West Coast location in Culver City two years ago.
Midtown Costco set to close, reopen as business center
The Costco location in Midtown, which has operated for more than 25 years, is closing its doors Thursday evening.
Hershey Entertainment & Resorts to Open Mellow Mushroom in Hershey in Fall 2027
Hershey Entertainment & Resorts (HE&R) today announced it will bring Mellow Mushroom to Hershey, Pennsylvania, marking the stone-baked pizza brand’s first location in the state. Mellow Mushroom is slated to open in fall 2027 at 337 West Chocolate Avenue, in the heart of downtown Hershey. The 8,000-square-foot restaurant will be owned and operated by HE&R. […]
L.L. Bean to open store in Greenville
L.L. Bean's new location will be within the 40-acre Greenville County Square Redevelopment on the south side of downtown Greenville.
Germany manager Jürgen Klopp reveals family connection to Augsburg
What made the location of Greece vs Germany special to Klopp?
2 massage businesses suspected of trafficking shut down in Kennewick sting
The same locations were shut down earlier this year under different names.
MEA Location-based Entertainment Market Size Report 2033
MEA location-based entertainment market size was $191.5M in 2025, is projected to grow from $253.2M in 2026 to $1,398.0M by 2033, at a CAGR of 27.6%
Chris Koza album release concert Oct. 24
Lanesboro Arts is thrilled to celebrate the release of Chris Koza’s latest album, “Millsmoke on the Skyline,” with a concert at the St. Mane Theatre at 7 p.m. on October 24. Chris Koza is a composer and performer based in Denver and Minneapolis. In his writing, Koza both honors and builds on the vast genre of Americana music. For every song that sounds like it could be strummed from a boxcar clacking slowly across a grassy midwestern plain, there’s a tune sailing from a city rooftop, echoing across a valley of streets and traffic, or a melody twisting and shimmering like a dim frequency deep into the starry night.Both as a solo artist and with his band Rogue Valley, Koza has supported and shared the stage with artists such as Brandi Carlile, Gordon Lightfoot, Ingrid Michaelson, The Jayhawks, Neko Case, Kathleen Edwards, Dan Wilson, and many more. His music regularly appears on ABC’s “General Hospital,” “60 Minutes,” and “Good Morning America.” Koza’s song, “Be Wild,” was also featured in a state of Minnesota tourism campaign.#placement_932485_0_i{width:100%;max-width:550px;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid932485 = window.pid932485 || rnd;var plc932485 = window.plc932485 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=932485;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid932485+';place='+(plc932485++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');Koza’s latest offering, “Millsmoke on the Skyline,” grants the newfound outsider perspective of the rich life and golden fleeting days throughout the rural Midwest. Weaving melody and lyrics into vignettes and narratives set in places where love is powerful, dreams are vast, and life is beautiful.The St. Mane Theatre box office will open at 6 p.m. on the day of the concert. Tickets will be sold in person at the door or can be purchased online at lanesboroarts.org. Seating at the St. Mane theatre is first come, first served. Tickets are on sale now for $25 for general admission or $22 for Lanesboro Arts members.The 2026 performing arts season at Lanesboro Arts is made possible by our season sponsor, Poet Refinery, as well as our concert level sponsors, High Court Pub, Krage Insurance Agency & Preble Farmers Mutual, Stone Mill Clothing & Gifts, E2 Boutique/Amish Experience, and The Cottage House Inn, and community sponsors, VIS Plumbing, Granny’s Liquor, Kingsley Mercantile, Batstone CPA, Clara’s Eatery, IGA, Niagara Cave, and Huntington Electric. This event is made possible by the voters of Minnesota through a Minnesota State Arts Board grant, thanks to a legislative appropriation from the Arts and Cultural Heritage Fund. #placement_932489_0_i{width:100%;max-width:550px;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid932489 = window.pid932489 || rnd;var plc932489 = window.plc932489 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=932489;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid932489+';place='+(plc932489++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');
Heritage Bank rebrands downtown Sioux Falls location as Physician Bank
A Sioux Falls bank branch and a downtown building now both are rebranded as Physician Bank launches its headquarters.
How much Class A office space is available in the CBD?
This map shows the locations of Class A office space in the Des Moines Central Business District based on data provided by brokerage firms CBRE and Colliers. Click on a site to see how many spaces are available and the total square footage in each building. Graphic created by Kate Meyer with Flourish The Central…
Bats may have first evolved in Europe 65 million years ago
A huge genomic and fossil study suggests bats first evolved in Europe around 65 to 60 million years ago before spreading across the globe. The findings also indicate that flight and echolocation emerged near the beginning of bat evolution, potentially helping explain how bats became one of the most successful mammal groups on Earth.
University Auto And Tire opens location in Elkins
Fayetteville-based University Auto and Tire recently opened its second location after acquiring a 6,500-square-foot vehicle maintenance shop on 3.2 acres in Elkins. Will and Bernadette Helton own University Auto and...
University Auto And Tire opens location in Elkins
Fayetteville-based University Auto and Tire recently opened its second location after acquiring a 6,500-square-foot vehicle maintenance shop on 3.2 acres in Elkins. Will and Bernadette Helton own University Auto and...
Stowaways moving to Blue Hill
After a year of operating in the former MacLeod's Restaurant location at 63 Main Street in Bucksport, the seafood restaurant Stowaways is relocating to Blue Hill, according to a social
Business Beat : Scooters Coffee Coldwater location to open Monday October 5th
COLDWATER, MI (WTVB) - Scooter's Coffee has announced it will officially open it's new drive-thru location in ...
Starbucks Is Closing Stores to Grow. That Sounds Backward Until You See Why
Starbucks shows that sometimes getting smaller, closing underperforming locations, and reinvesting in what works is the path to growth.
Stanton Looks to Curb Crime Hot Spots With New Business License Rules
Stanton officials are amending their business license rules to prevent illegal activity from repeatedly popping up at commercial locations .
Health department, NorthLakes Community Clinic offering local flu shot clinics
Appointments are encouraged, but walk-ins are welcome at all locations, according to the health department.
Meritage to close 38 restaurants as Wendy’s fight unfolds
Meritage Hospitality Group plans to close 38 restaurants as the Wendy’s franchisee fights to retain control of 314 locations in Chapter 11.
Flu shots now available for the UK campus community
UK students, employees and community members can now schedule their seasonal flu shots at convenient campus locations.
Navigating the American Dream: How Integrated Financial Tools, Credit and Rewards Can Help Small Businesses Succeed
(Feature Impact) Owning a small business has been a cornerstone of the “American Dream” for generations. It represents the chance to transform a passion into a livelihood and legacy. However, turning dreams into reality is rarely a smooth or easy process and requires more than ambition alone. Today’s business owners need support and access to tools that enable them to overcome challenges and keep growing.#placement_678081_0_i{width:100%;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid678081 = window.pid678081 || rnd;var plc678081 = window.plc678081 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=678081;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid678081+';place='+(plc678081++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');Recent research conducted by the Capital One Insights Center shows 75% of more than 1,000 surveyed small business owners with more than one employee and annual revenues of up to $20 million are confident about the future, and 69% believe their business is actively primed for growth.While this optimism is promising, 47% of business owners still said their operations either stayed the same or became less efficient over the past year, citing issues like back-office friction and fragmented financial systems that make it difficult to get a clear picture of the health of their businesses.If you’re a small business owner eager to grow but not sure how to get there, start with this advice from real small business owners and experts at Capital One.Identify Sources of FrictionBefore you can pour effort into growth, you must understand what barriers are holding you back. Take time to look under the hood of your business to identify where time and energy is being lost.For example, you may be among the 78% of small business owners who feel stressed and uncertain about expense management – think hours spent hunting for receipts, manually entering numbers into software and reconciling accounts. Operational challenges aren’t just a hassle; they also pull attention away from important priorities like serving your customers and planning for growth. “We were focused on making as many candles as possible, especially during the busy season,” said Katie Roering, co-owner of Fontana Candle Co. “A lot of the back-office tasks like procurement, raw material purchasing, forecasting – all the really important things – were done at 3 a.m., 8 p.m. or on Saturday and Sunday, and there really just was not enough time in the day to get everything done that we needed to. We just knew as we continued to grow, we needed to streamline our processes, build out our team and keep moving forward.”Use Integrated Tools to Manage FinancesInstead of balancing 10 different tracking and analysis tools, you can turn to one-stop solutions to improve efficiency. Time gets lost when you’re forced to manually gather and interpret relevant data before you’re able to act. You need a platform that handles the busywork for you.Integrated, or “all-in-one,” financial tools – like accounting and bookkeeping platforms with automation capabilities or business credit cards featuring built-in analytical tools – allow you to easily stay on top of cash flow and day-to-day operations. For small businesses where every hour and dollar makes a difference, consolidating and automating systems can have an immediate impact. In fact, 51% of survey respondents said integrated tools have already fueled their growth.Leverage Credit Access and Rewards WiselyGrowth requires capital, so access to credit is a game-changer for many business owners, with 77% describing it as a key factor in achieving business resilience. Having funds accessible when you need them makes your business more capable of weathering storms such as equipment failures and seasonal slowdowns. It also puts the power in your hands to act when an exciting opportunity presents itself, like an inventory flash sale or the chance to advertise in a new market.Access to credit comes with another advantage: rewards. By using credit cards for your daily business expenses, you can earn cash back, points or travel rewards. Whether you redeem these to cover everyday expenses, book business trips or reinvest in the business, they can act as a bonus source of income. Learn to maximize rewards like the 84% of small business cardholders surveyed so you aren’t leaving money on the table.To learn more about how small business owners can identify obstacles, employ integrated financial tools and use credit as a tool for growth, read the full report at capitalone.com/about/insights-center.Photos courtesy of Shutterstock
Did your favorite local Starbucks just close? These 36 SoCal locations are likely shuttered
Starbucks said it would close 250 locations in North America as the chain battles increased competition. Thirty-six of those locations appear to be in Southern California.
WHO recognizes healthy, innovative cities across the Western Pacific Region
Nine Healthy City champions from across the World Health Organization (WHO) Western Pacific Region received special recognition at an awarding ceremony during the 11th Global Conference of the Alliance for Healthy Cities in Sydney, Australia.The WHO Regional Office for the Western Pacific has presented the Healthy Cities Recognition Awards every two years since 2004 to celebrate innovative and impactful city-led initiatives that improve the health and well-being of urban populations.Eight cities received awards for their best practices, and one National Forum received the WHO Regional Director’s Special Award in recognition of its long-standing leadership in advancing the Healthy Cities movement.Awardees were selected through a rigorous evaluation process and recognized for demonstrating measurable, innovative and sustainable approaches to health challenges faced by cities.Remarking on the significance of the awards, Dr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control at the Regional Office, said that, “There is no single blueprint for a healthy city. What works in one context may need to be adapted to another. But by sharing our experiences, including what worked, what was challenging, and what we learnt along the way, we can help one another move faster and further.”Award-winning cities and initiativesThis year's awards recognize outstanding city-led initiatives that have demonstrated measurable impact, innovation and sustainability in advancing health initiatives for urban populations.Baguio City (Philippines) – Data for equity: informing action, improving healthDr Donnabel Tubera-Panes, City Epidemiologist – Medical Officer IV of the Health Services Office accepted the award on behalf of Baguio City. Photo credit: Maria BoyadgisBaguio City was recognized for developing a pioneering Livability Index that provides village-level data across all 128 barangays (villages), enabling evidence-based planning and more equitable allocation of resources. By integrating community participation and institutionalizing the index within city planning and budgeting processes, the city has demonstrated how data can drive action to reduce health and social inequities.Eunpyeong-gu (Seoul, Republic of Korea) – Communities living in vulnerable situations: advancing health equity through community engagementVice Mayor Honourable Ahn Hyoung Jun accepted the award on behalf of Eunpyeong-gu. Photo credit: Maria BoyadgisEunpyeong-gu was recognized for its inclusive health equity programme supporting vulnerable populations, including isolated older adults and LGBTQI+ communities. Through peer-led community networks, social cooperatives and inclusive service design, the district has strengthened access to care, promoted social inclusion and advanced community ownership of health initiatives.Madiun City (Indonesia) – Adapting and mitigating climate-related crises: building heat resilience and preventing flood-related health risksMs Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of Madiun City. Photo credit: Maria BoyadgisMadiun City was recognized for its SUPERMIE (Sustainable Public Environmental Management Initiative) – a community-based environmental governance model that addresses urban flooding, climate resilience and environmental sustainability. The initiative contributed to reductions in flood-prone areas, greenhouse gas emissions, diarrhoeal disease and dengue fever, while at the same time improving food security through neighbourhood food gardens. The programme has already been replicated in 15 cities and regencies across Indonesia.Macao Special Administrative Region (China) – Protecting communities from tobacco and alcohol-related harms: tackling commercial drivers of riskDr LO Iek Long, Director of the Health Bureau, Macao SAR, China accepted the award on behalf of Macao. Photo credit: Maria BoyadgisMacao SAR was recognized for implementing a comprehensive and integrated approach to tobacco and alcohol control. Through legislation, monitoring systems, enforcement, public awareness campaigns and multisectoral partnerships, the programme has strengthened protection against major risk factors for noncommunicable diseases and established a model that is highly transferable to other urban settings.Phnom Penh Capital City (Cambodia) – Safe, active and health-enabling transport: advancing health and reducing inequities in urban mobilityH.E. Khoung Sreng, Governor of Phnom Penh Capital City accepted the award on behalf of Phnom Penh Capital City. Photo credit: Maria BoyadgisPhnom Penh received the award for its Safe School Zone Project, which combines infrastructure improvements, speed management, enforcement, education and stakeholder engagement to protect children and communities. The initiative has demonstrated measurable reductions in crashes and vehicle speeds while providing a scalable model for safer urban mobility across the country.Quezon City (Philippines) – Transforming food environments: addressing policy, market and urban design drivers of health and nutritionMs Jirah Asa M. Sideco, Chief of the Nutrition Section of the Quezon City Health Department accepted the award on behalf of Quezon City. Photo credit: Maria BoyadgisQuezon City was recognized for its public food procurement policy that promotes healthier diets through government-run institutions and feeding programmes. Supported by strong policy frameworks and monitoring systems, the initiative improves access to nutritious food for vulnerable populations while serving as a benchmark for other local governments.Samarinda City (Indonesia) – Preventing violence and promoting gender equality: transforming urban systems, norms and spaces Mrs Rinda Wahyuni, Chairperson of Samarinda Healthy City Forum accepted the award on behalf of Samarinda City. Photo credit: Maria BoyadgisSamarinda City was recognized for its multisectoral approach to preventing violence and advancing gender equality. Responding to local evidence on violence against women and children, the city has positioned violence prevention as a public health priority, bringing together health services, schools, social welfare institutions, law enforcement, civil society and community leaders to strengthen prevention, reporting, survivor-centred support and legal protection. Through inclusive policies, community engagement and sustainable city financing, Samarinda has developed a locally owned and scalable model for creating safer, more equitable and inclusive urban communities.Singapore – Age-friendly cities: transforming systems to bridge generations for a healthier tomorrowDr Tan Weng Mooi, Director, Integrated Health Promotion, accepted the award on behalf of Singapore. Photo credit: Maria BoyadgisSingapore received recognition for its Healthy Precinct Framework, which translates national healthy ageing priorities into neighbourhood-level action. The initiative integrates preventive care, social support, service coordination and age-friendly environments while actively engaging older persons, caregivers and community organizations. Its expansion across multiple precincts demonstrates its scalability and long-term sustainability.WHO Regional Director’s Special AwardNational Forum for Indonesian Healthy Cities/Regencies (Indonesia)Ms Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of the National Forum. Photo credit: Maria BoyadgisThe WHO Regional Director's Special Award was presented to the National Forum for Indonesian Healthy Cities/Regencies (FKKSI) in recognition of its long-standing leadership in advancing the Healthy Cities movement across Indonesia. As a national platform bringing together local governments, communities, academia and civil society, FKKSI has played a critical role in promoting collaboration, capacity-building, knowledge exchange and advocacy. Its efforts have strengthened and institutionalized healthy urban development nationwide and established a model for multisectoral engagement in the Region. Healthy Cities for allThe 2026 Healthy Cities Recognition Awards highlight how cities can lead transformative action on health by addressing climate change, inequity, ageing, nutrition, mobility, social inclusion, violence prevention and the commercial determinants of health. The recognized initiatives demonstrate that local governments, communities and partners can work together to create healthier, safer and more resilient urban environments for everyone. As urban populations continue to grow across the Western Pacific Region, WHO remains committed to supporting cities in advancing health, equity and sustainable development through the Healthy Cities approach and the Alliance for Healthy Cities. ###Note to editorsSince 2004, the WHO Healthy Cities Recognition Awards have provided a platform for cities to share innovative and effective approaches to improving health and well-being. The awards recognize achievements in areas including climate resilience, healthy ageing, health equity, gender equality, tobacco and alcohol control, urban mobility, nutrition and data-driven governance. In 2026, more than 150 submissions were received from cities and local governments across the Western Pacific Region. The titles and affiliations of awardees are presented as they were at the time the photo was taken.______________For more information, or to arrange media interviews, contact: WHO Regional Office for the Western Pacific: wprocom@who.int
ESPN College GameDay Week 5 location announced for 2026 season
College GameDay has announced its destination for Week 5.
Rise Up Coffee opens a second location, new Flip's Pancake House, Just Us & Treats opens and more Quad-Cities business news
Rise Up Coffee opens second location, Flip's Pancake House opens in Milan, Just Us & Treats opens, and more Quad-Cities business news.
Nebraska vs Michigan State
Big Ten play! I am probably wearing a suit and tie by now. I wonder if I’ll get to watch the game in any way. I bought a Starlink mobile just to get internet at this place we’re going to. I hope it works. HOW TO WATCH Time: 4:00pm CST Location: Memorial Stadium, Lincoln, NE Surface: Hellas Turf […]
Pennsylvania health network plans dinners to thank local veterans
LEWISTOWN, Pa. (WHTM) — A Pennsylvania health system is thanking veterans this fall. Geisinger will host free drive-through appreciation dinners for local veterans at 12 locations, including …
Braves vs Marlins Game Thread: 9/26/2026
Join us and discuss today’s game in the comments below! Game Info Game Date/Time: Saturday, September 26, 4:10 p.m. ET Location: loanDepot Park, Miami, FL TV: BravesVision Streaming: MLB.tv Radio: 680 AM / 93.7 FM The Fan, Los Bravos
CT man accused of stealing, forging checks from local business and paying juvenile to deposit them
Investigators allege that the man contacted the juvenile to deposit the checks for him at different bank locations and said he would pay him $5,000.
Georgia still tops for business following nationwide survey
Georgia’s political leaders are celebrating the state’s ranking as the top location for corporate expansions for the 13th year in a row.
Manhattan Pizza opens first West Virginia location
INWOOD - Brothers Jordan Whitehurst and Zach Zarou have spent most of their lives working in the pizza business, and now, they’re bringing their family’s business to West Virginia.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
2 dead in violent Jeep crash across parking lot of KC business
Locationof the crash -google image KANSAS CITY—Two people died in an a
I Had 5 Key Pillars of Health Tested, in Less Than Six Hours
With two Biograph locations, one in New York and one in the San Francisco bay area, the preventative care clinics evaluate assessments across five key pillars of health.
Is an Iowa-based dog business really going to take over the Bar K location in OKC?
Rumors circulated on social media on Friday morning about an Iowa-based business possibly taking over the Bar K location in downtown Oklahoma City.
Science in action: Grand Teton Council invites community to annual STEM-A-RAMA event
IDAHO FALLS — The Grand Teton Council of Scouting America (formerly the Boy Scouts of America) invites community members to a free annual event to see science in action and get hands-on with STEM careers this Saturday. Since 2019, the annual STEM-A-RAMA event has brought numerous organizations together in one location, allowing local youth to […]
Trump promised to campaign in midterm battlegrounds. He's starting in deep red states instead
While organizers insist the rallies are in locations with media markets that span state lines and they will help bolster broader turnout, Trump's itinerary is yet another sign of the uphill fight that his party faces.
Novant Health sells 36 urgent care sites to S.C. system
Novant Health is selling 36 urgent care locations to Prisma Health, South Carolina’s largest healthcare system. Terms weren’t disclosed.
Read about 20 business updates in New Braunfels
New Braunfels welcomes new restaurants, coffee shops and retail stores while celebrating local business anniversaries, relocations and ownership changes.
Wisconsin senator introduces bill to ban ICE, CPB agents from polling locations
Sen. Tammy Baldwin said the legislation sends a message to the president that lawmakers are watching, even if there’s no chance the bill passes before Election Day.
Report: Cubs, Red Sox Could Finish Series In Tampa
As a looming nor’easter forces scheduling shifts and doubleheaders, the regular-season finale faces a potential relocation to Tropicana Field to bypass Boston’s worsening weekend weather forecast.
SCORE Iowa to launch statewide organization Oct. 1
Iowa’s existing SCORE chapters will consolidate into one statewide organization, effective Oct. 1, expanding access to business mentoring and educational resources for entrepreneurs and small businesses across all 99 counties. SCORE Iowa provides free, confidential, one-on-one mentoring by connecting entrepreneurs with volunteers whose experience matches their business needs, regardless of location. “Bringing our Iowa chapters…
Pilates, massage: Check out 4 Allen business updates
Pilates Retreat, Relax Myora and 4Ever Young are now open in Allen, and Vital Dental is planning a new location.
Encompass Health celebrates opening of new Bangor rehabilitation hospital
The for-profit health organization has expanded its footprint in recent years with plans to open hospitals in several locations around the country.
Prisma Health to Acquire Urgent Care Centers
Prisma Health announced an agreement to acquire 36 urgent care locations in South Carolina (formerly Doctor's Care) from Novant Health, expanding access to convenient care for communities across the state. The acquisition includes approximately...
Aberdeen lose 500 semi-final tickets after pitch invasion
Aberdeen have their ticket allocation cut for the Premier Sports Cup semi-final against Rangers following a pitch invasion and pyrotechnics display from fans in the previous round.
Prisma Health to acquire 36 South Carolina urgent care centers from Novant Health
Prisma Health announced an agreement Thursday to acquire 36 urgent care locations across South Carolina from Novant Health.
Cubs’ Final Series Might Be Forced To New Location
The magic number for the Chicago Cubs to clinch their spot in the 2026 MLB postseason is one, as they need either just one more victory or a loss by the Arizona Diamondbacks. The Cubs, who are playing their series finale against the Miami Marlins, have one more series remaining on the road against the […] The post Cubs’ Final Series Might Be Forced To New Location appeared first on HEAVY.
Governor announces another $54.6 million in rural health grants
Gov. Sarah Huckabee Sanders announced an additional $54.6 million in federal funding to bolster rural healthcare on Thursday, the latest allocation from the state's share of a $50 billion fund established by Congress last year.
Quincy Artists Guild to hold annual art show in November
QUINCY — The Quincy Artists Guild will hold its annual art show and sale at a new location this year, District Designs, 117 N. Fourth St. in downtown Quincy, running […]
Real-time data provides nuanced look at likelihood of cannabis use
Substance use, including cannabis, is not one-size-fits-all. Some people might consume more in the company of others or in certain situations or locations. Research from the Arizona State University Department of Psychology examines these nuances by leveraging the smartphone most of us carry. This work relies on sending surveys, called ecological momentary assessments, or EMAs, that prompt people to report where they are, what they are doing and what is happening in that moment.
WSFS Financial Corp. opens 1st office in Lancaster County
Delaware-based WSFS Financial Corp. has expanded to Lancaster County with the opening of its first location here.