SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " remaining " 471 found 🔀 AI-powered Shuffle
'This has no place for partisan politics' say Camp Lejeune contamination victim advocates
At a Greenville rally this week, President Donald Trump said he will order swift settlement of remaining claims only if Republicans hold Congress.
Sony reportedly exits UHD Blu-ray player market
Has discontinued its last remaining player, UBP-X700/K
Who went home on 'DWTS' Week 6 from Dedication Night
Tuesday night was an emotional one on Dancing with the Stars as the reality show hosted Dedication Night. The 10 remaining couples all honored special people -- or places -- in their lives, often bringing the crowd, viewers and judges to tears. Former DWTS pro and two-time Mirrorball champ, Kym Johnson, joined the panel as a fourth judge this week.
Alberta rejects a move toward independence from Canada
With more than 1.5 million votes counted, 76% supported remaining in Canada
'DWTS' Dedication Night: What each couple will dance to Tuesday night
Dancing with the Stars returns Tuesday night, with the 10 remaining couples participating in the always emotional Dedication Night. The evening allows the celebrity dancers to perform for someone or something important to them, often featuring guest appearances.
FNCS Solos Last Chance Qualifier in NA West: Session 1
Keep your FNCS Solos journey alive in the Last Chance Qualifier! LCQ Round 1 is open to eligible players who participated in an FNCS Solos Qualifier Round 1 session but have not already advanced to the LCQ Final or the FNCS Solos Finals. Players will compete in a single three-hour session with up to 11 matches. After the session concludes, the top 70 players in each region will advance to the LCQ Final. The LCQ Final lasts approximately two and a half hours and features up to five matches. Every match provides a direct path to the Finals: the player who earns the Victory Royale will receive 1,000 points and immediately qualify for the FNCS Solos Finals. Once qualified through a Victory Royale, that player may not compete in any remaining LCQ Final matches. After the LCQ Final concludes, the next 17 highest-scoring players who have not earned a Victory Royale will also advance to the FNCS Solos Finals. This is your last chance to secure a spot—good luck and have fun!
Staff Turnover and Missing Funds: A Tumultuous Week at Trump’s White House
With just over two weeks remaining before the midterm elections, things inside the White House are turbulent. Even though President Donald Trump isn’t on the ballot, he is top of mind for many as they head to the polls. Republicans across the country are already working to persuade voters not to ...
Business News: Former AP CEO François-Henri Bennahmias Brought In As Consultant To Hublot
In a surprise move, Bennahmias will serve as a consultant at the LVMH watch brand, with Julien Tornare remaining CEO.
Beloved Lakeview Electronics Shop Where Neighbors Found 'Hidden Gems' Closing After 55 Years
Lakeview's Royal Home Entertainment is selling off its remaining inventory ahead of its closure Saturday, though owner Joe DeGuide still plans to offer custom installation services online.
Mom-and-Pop Business Owners Grapple with Harsh Times
Report shows small business owners in NYS less optimistic about the economy. Taxes, inflation, labor costs and competition from larger businesses are major concerns right now, they say By Aaron Gifford [caption id=attachment_11067 align=alignright width=300] Ashley Ranslow is director for New York state at The National Federation of Independent Business (NFIB).[/caption] Owners of mom-and-pop businesses in New York state have been less optimistic lately than their peers in other parts of the country, a recent report indicates. The National Federation of Independent Business (NFIB), based on a survey of 11,000 of its members in the Empire State, reported that taxes, inflation, labor costs and competition from larger businesses are major concerns right now. “Indeed, while taxes are a major problem in New York and the United States overall, New York small businesses notably are struggling more with the state’s onerous, multi-level tax burden,” Ashley Ranslow, NFIB’s director for New York state, said in the July report. Compared with surveys of business owners in other states, far fewer New York respondents rated their businesses as in excellent or good health. The report also said labor costs here are about 25% higher than the national average and are the “single most important problem” facing businesses. One respondent to the New York-specific survey complained that too much red tape, taxes and laws that restrict high-yielding companies have stifled their operation’s growth. Others said high disability and workers’ compensation insurance costs, alarming increases in utility rates and excessive building regulations are discouraging. Statewide, New York has a gross domestic product of $2.53 trillion (third in the nation, followed by Texas, $2.90 trillion; and California, $4.25 trillion), a per capita income of $90,500 (sixth) and an unemployment rate of 4.6% (34th). There are 2.4 million small businesses that employ 3.9 million people. [caption id=attachment_11112 align=alignright width=451] Member of the Greater Liverpool Chamber of Commerce gather at one of the several functions the chamber organizes monthly. “Everyone in this business community encourages each other to shop local. Everyone just wants to see each other succeed,” says Megan Wilmot, the chamber director[/caption] “New York state boasts one of the largest, wealthiest and most diverse cities in the world — and that’s still only about half the state’s population,” the report said. “In other words, the state is both its iconic city and so much more — geographically, demographically, economically. But New York is not without its challenges, challenges that include notably high taxes and other weaknesses that impact the small business environment,” it said. The report includes an optimism index that compares responses from New York (NFIB) members with those of their peers in other states across several categories. This ranges from plans to increase employment to expectations for higher sales, to plans to increase inventory or expand. The scores for Empire State business owners were lower in most categories, but they did score higher than the national average in noting that they have current employment openings, and that they are hopeful that the economy will improve. “The metrics so far paint a picture of a state with a series of challenges for small businesses, from a slightly below national average Optimism Index to a more seriously below national business health to very substantially below national Employment Index. What is going on with businesses that are creating these differences?” the report stated. In Central New York, the regional labor force comprises nearly 398,000 workers. The median household income here is $71,463, and the gross domestic product for the region last year totaled $61.3 billion, according to the CenterState CEO economic development and research organization. About half of the region’s labor force works for small and mid-sized businesses, although the number of people employed in that sector has decreased by 7% since 2010, according to CenterState’s 2026 economic forecast report. “While record-high employment in large-scale enterprises provides a strong foundation for Central New York,” the report says, “the long-term health of communities depends on a thriving small business sector to serve as a stabilizer.” Area employers identify several barriers to Central New York’s anticipated growth, including lack of specialized or skilled workers, government regulations, unaffordable housing options and long-term construction disruptions. In the city of Syracuse, the number of jobs in retail trade decreased by 1,500 or 4.7% between July 2025 and this past July. By contrast, the number of jobs in the leisure and hospitality sector increased by 2.5% or 700 jobs, in the same annual period, according to the New York State Department of Labor. Still, there’s plenty of interest for new businesses across Central New York. U.S. Census figures show that the number of applications for new businesses in all four counties increased significantly in the past 20 years. In Cayuga County, there were 324 applications in 2005 compared to 470 last year. In Madison County, the number increased from 385 to 480; Onondaga County, from 2411 to 4132; and Oswego County, from 553 to 836. Downtown Cazenovia is exemplary of Madison County’s trend: In the past year, the village welcomed a bait shop, a thrift store, a vitamin infusion center, a pizzeria, a Pilates studio and an Italian restaurant. A candy store is scheduled to open on the main drag in the months ahead. Oswego’s list of interesting new businesses in the past year includes a bubble tea shop, a hot dog eatery in Fulton, a specialty grocery store that features New York state products in Mexico, a beauty and esthetics studio in Hannibal and a hardware and farm supply store in Sandy Creek. In Onondaga County, the Liverpool area has also enjoyed a steady stream of new shops and eateries in recent years. That suburban community is unique in that, unlike neighboring communities, most of the restaurants are family-owned and not part of a national chain. [caption id=attachment_11116 align=alignright width=300] Megan Wilmot is the executive director of the Greater Liverpool’s Chamber of Commerce.[/caption] Megan Wilmot, executive director of the Greater Liverpool Chamber of Commerce, said independent business owners in her community maintain a strong sense of pride in holding their own against national companies. The chamber helps boost morale with red carpet events, ribbon cuttings, coffee hours and five-year anniversary celebrations for participating businesses. “We have built such a strong community,” Wilmot said. “Everyone in this business community encourages each other to shop local. Everyone just wants to see each other succeed.” In Syracuse, the downtown retail occupancy rate last year was about 82%, a slight improvement from 2024, according to the Downtown Syracuse Committee’s most recent annual report. Buildings with the largest amount of vacant space included The Galleries, One Park Place, and Equitable Towers, though not all of those spaces are designated for retail use. New businesses that opened in downtown Syracuse last year: Better with Time Clothing, Dakshin Curry & Biriyani, Havana Tattoo Society, Milano Bean Café, Miss Daisy, Pausa Coffee, Sweets for Babe, The Society CNY and Yafah Beauty Studio. The Destiny USA mall’s occupancy rate decreased from 80% in 2023 to 72% by the end of 2024, according to Integra Realty Resources. That leaves more than a quarter of the mall’s retail space vacant. “Looking ahead, the retail market is expected to see minimal rent growth, with vacancy rates likely remaining stable in community and neighborhood centers but continuing to rise in enclosed malls,” Integra’s report said. “New construction activity is low and redevelopment plans for former malls like Shoppingtown and Great Northern are still in the planning stages. The proposed Micron chip plant may spur development, but challenges remain in finding co-developers for large-scale projects.” Nationally, the U.S. Chamber of Commerce expects that small businesses will remain resilient and see their sales and revenues eventually improve. That organization, in a recent national survey, found that 25% of small business owners expect the economy to improve in 2027, while 45% indicated that they plan to increase employment in the next 12 months. And 69% said they believe their small business is in good shape and 70% said they are comfortable with their current cash flow. Thirty-one percent of small businesses reported raising their prices in July and 28% are planning to raise their prices within the next three to four months, the report said. Twelve percent indicated that this is a good time to expand their business. “Small business owners voice optimism for future revenues and hiring,” the report said. “High costs continue to be a wet blanket on reinvestment.” The NFIB reported in July that Main Street, despite gas price hikes, “is OK … for now.” Its small business economics trend report said sales across the country have been strong compared to last year, but continued inflation and higher prices from mom-and-pop establishments are causing some “cracks” to show. “If costs stay this high for much longer, reduced investment will have a tangible economic impact,” the report said. “The status quo is OK, but the outlook? The outlook is uncertain.”
Which remaining Ohio State game are you most excited for?
The Buckeyes have six games remaining on their regular-season schedule, each with its own amount of intrigue. For this week’s fan survey, we want to know which game you are most excited about. Click the link and vote!
Man United Set To 'Attack' The January Transfer Window
Michael Carrick’s struggling squad eyes vital reinforcements as Fabrizio Romano reveals the Red Devils possess the remaining funds necessary to fix glaring roster gaps this winter.
Ranking Texas A&M's 6 remaining opponents from easiest to toughest
Texas A&M’s loss to Missouri increased the difficulty of a remaining schedule that includes Texas, Alabama and Tennessee.
ESPN predicts FSU's remaining schedule after Louisville loss
ESPN’s updated Matchup Predictor lowered Florida State’s win probability in each of its final six games following the Seminoles’ loss to Louisville.
Judge orders the Trump administration to cancel taxpayer-funded TV ads
President Donald Trump must cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message, a federal judge ordered Sunday night.
Eagles’ Jake Elliott Gets Honest On Final Moments vs Jaguars
Jake Elliott nearly had a walk-off field goal to help the Philadelphia Eagles secure a victory in London to defeat the Jacksonville Jaguars as underdogs. Due to clock management, Elliott’s impressive make from 48 yards went in with eight seconds remaining on the clock in the fourth quarter. Most expected Elliott to kick far enough […] The post Eagles’ Jake Elliott Gets Honest On Final Moments vs Jaguars appeared first on HEAVY.
US judge orders Trump to cancel taxpayer-funded TV ads
US President Donald Trump must cancel any remaining taxpayer-funded television advertisements promoting himself, a federal judge ordered Sunday, following backlash from both sides of the political div...
Mike Love 'Facing Serious Health Challenges,' John Stamos Says
Mike Love, the sole remaining original member still touring as The Beach Boys, is "facing serious health challenges," John Stamos wrote on Oct. 11.
Judge orders Trump to cancel taxpayer-funded TV ads
A federal judge has ordered President Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message.
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
A federal judge has ordered President Donald Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message. The administration said the ad campaign was already coming to an end. U.S. District Judge Jennifer L. Rochon in N...
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
A federal judge has ordered President Donald Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
President Donald Trump must cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message, a federal judge ordered on Sunday night as the administration said the ad campaign was coming to an end.
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
President Donald Trump must cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message, a federal judge ordered on Sunday night as the administration said the ad campaign was coming to an end.
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
A federal judge has ordered President Donald Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message.
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
A federal judge has ordered President Donald Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message.
Judge orders the Trump administration to cancel taxpayer-funded promotional TV ads
A federal judge has ordered President Donald Trump to cancel any remaining television commercials paid for with millions of dollars in taxpayer money to promote his political message.
What Wake Forest Said After the NC State Win
Wake Forest got one of those wins Saturday that will get notated through the remaining weeks of the season as an important win. Coaches will tell you they are all important. Everyone else will acknowledge that there are some games that stand out on the schedule more than others. North Carolina State had beaten Wake …
Ranking Wisconsin football's remaining opponents from best to worst
While it looks unlikely, if they can get through Halloween unblemished, then Wisconsin hold chance of being able to progress as far as they allow
After Callais ruling, plaintiffs now raise questions over Louisiana's 2nd District
The winners of the U.S. Supreme Court decision that led Louisiana to eliminate one of its two majority-Black congressional districts now have their eyes on the state’s remaining seat held by a Black lawmaker.
The 'Black Box' That Solves AI Fears, And The Stock Behind It
Xometry has the inside track to one of the remaining largely untapped online markets: the market for things that don't yet exist.
What Are the Remaining Millennium Prize Problems?
OpenAI’s trove of new math results doesn’t fully solve any of these highly prestigious open questions, but it seems to make progress on some.
World Supercross (WSX) ends 2026 season after one round
Two weeks after canceling the British GP to seek additional funding, the beleaguered series has canceled all remaining races, but remains committed to the concept.
“DWTS” contestants ‘gasped’ backstage when Ciara Miller and Brandon Armstrong were eliminated
Some of the remaining stars react to the surprise goodbye while speaking with EW.
Pellegrini favored to start in Como-Roma
Gian Piero Gasperini is ready to welcome back the remaining players who have been on international duty, preparing for the trip to Como, scheduled for Sunday at 12:30 PM. Mora, Castro, Soulé, and Bal...
DOL renews charter for OSHA advisory committee
Eight of the 12-member committee’s seats are vacant, and the terms of the remaining four members are set to expire in January.
Brazil: Lessons from a Disaster
By Antonio Martins (Outras Palavras) Defeats become deeper and more prolonged when we misunderstand what caused them, avoid correcting course, and embrace “solutions” that only compound our mistakes. Lula’s government and the Brazilian left suffered a disaster in Sunday’s election. Contrary to every poll, the president finished the first round 2.2 million votes behind Flávio Bolsonaro—and, more significantly, 3.4 million votes below his total four years ago, when the machinery of the state was working against him and in favor of his opponent. His vote share declined in 98 percent of Brazil’s municipalities. The PL, the main party of the far right, elected 121 deputies and 28 senators, becoming the largest caucus in both houses of Congress. The parties aligned with the Centrão—Brazil’s bloc of transactional center-right parties—were somewhat diminished, but will still hold roughly 250 seats in the Chamber of Deputies and 35 in the Senate. That will make it easier to assemble the majorities needed to amend the Constitution or impeach Supreme Federal Court justices. If elected, Flávio Bolsonaro could appoint four members of the Court, substantially altering its internal balance of power. What produced these results? How can the far right be prevented from consolidating them into a prolonged political hegemony? And what is the essential change of direction the left now needs? Explaining the Disaster Across the commercial media and the exuberant chaos of digital platforms, interpretations are multiplying. Some focus on specific episodes: Lula’s absence from the Globo debate, his very close relationship with Alexandre de Moraes, or his emphasis on issues supposedly remote from most people’s everyday concerns, such as rare earth minerals. Among the more systemic interpretations, three seem especially questionable. One argues that the principal defeat was not the left’s, since its congressional representation declined only slightly. The decisive movement captured at the ballot box, according to this view, was a shift within the right itself—from the more moderate and transactional forces of the Centrão toward the more ideological and radicalized forces of the PL and Novo. A second interpretation holds that the nature of electoral and political processes has changed. The material interests and aspirations of society, it argues, no longer play the central role they once did; they have given way to forms of subjective self-identification that the left has yet to understand. And a third concludes that, because of these two developments, we should expect a political winter: a prolonged period in which the far right and the broader right dominate Brazilian political life. There are important elements in all three interpretations. The problem lies in what they deny or leave out: Lula’s third government was a small-bore government. It offered the majorities that elected it neither a clearly better life nor reasons to believe again in politics and its power to transform society. These failures flowed from two fatal accommodations, which I will examine below. As a result, the government suffered a slow but steady erosion of support. And, as has happened in so many Western countries, it gave the far right the opportunity to present itself as anti-system and to benefit from popular frustration and distress. The interpretation that emphasizes the migration of votes from the center-right and traditional right toward the far right has been advanced, among others, by the courageous journalist Leonardo Sakamoto. In his UOL column on Monday, October 5, he highlights the miserable behavior of the traditional conservative parties. Over the past four years, they repeatedly joined forces with the “neo”-fascists, helping to “normalize” them—a criticism that could equally be directed at almost the entire corporate media. Believing they could use the far right as a stepping stone, they instead ended up partly devoured by it. This was especially true in the Senate, where the PL’s gain of 13 senators and Novo’s gain of two came at the expense of the PSD, which lost nine; the MDB, which lost two; the PSDB, which lost two; and the PP, which lost one. Sakamoto’s observation is accurate and necessary, but it leaves uncomfortable questions unanswered. Why did the erosion of the Centrão benefit the far right rather than, for example, producing growth for the left—as has happened so many times before, both in Brazil and elsewhere? The answer is not difficult. Throughout its four years in office, Lula’s third government was almost invariably associated with the Centrão. Here lies its first accommodation: accepting the limits imposed by conservative institutions; avoiding, as much as possible, any attempt to strain those limits through popular pressure; and believing only in the modest changes that could be squeezed through openings in Congress. The failure of the campaign to end the six-day workweek is emblematic. Lula could have electrified the presidential race by pairing it with a popular campaign for passage of the measure. Instead, he chose to place his hopes in the hands of Senate president Rodrigo Alcolumbre. He generated no mass mobilization, did not force his opponents onto an uncomfortable defensive, and won no victory. In September 2025, the government squandered the greatest of its many opportunities to shake up conservative power in Congress. Popular opposition to the so-called Shielding Amendment—which, if approved, would have restricted criminal proceedings against members of Congress—brought crowds into the streets, mobilized primarily by artists and social movements. This opened the possibility for a broader political education: a campaign that could begin exposing the limits and dysfunctions of Brazil’s political system while putting Bolsonaro’s movement on the defensive for its predictable support of political privilege. The amendment was defeated. But the executive branch then backed away from the fight. It remained associated with an institutional world widely seen as corrupt, elitist, and indifferent to ordinary people’s struggles. In doing so, it forfeited its credibility as a vehicle for the protest vote. On Sunday, it reaped the bitter fruits. Are We Doomed? Taking a different approach from Sakamoto, the philosopher Moysés Pinto Neto and other writers have drawn attention, in their first analyses of October 4, to the fragmentation of the public sphere produced by Big Tech platforms. Through their algorithms, these platforms present each person with a different view of social reality. As a consequence, it becomes much harder to identify common material problems and demands—for example, the fight for labor rights or for a properly funded public health system. Voters no longer embrace such demands, these authors argue, because they no longer see themselves as part of a collective. Instead, they tend to value the identities assigned to them by neoliberal subjectivity—the role of the entrepreneur, for example. On this interpretation, the left’s possible error lies in clinging to outdated illusions. Moysés’s warning is highly relevant and resonates with arguments such as Naomi Klein and Astra Taylor’s “Apocalyptic Fascism and the Billionaires’ Bet.” Unlike a century ago, the far right no longer promises a radiant future. It concentrates instead on resentment—especially that of young men. “They belong to a generation that fears it may never own a home, but compensates with the pleasure it gets from constantly provoking progressives online. Convinced their future has been stolen, they share memes romanticizing historical authoritarian regimes,” the authors write. But Moysés seems to confuse this danger with inevitability. He fails to see that the left’s answer cannot be adaptation. On the contrary, it must strengthen the possibility of politics as collective action. Nor does he recognize that precisely such a reversal is already becoming possible in some of the most promising mobilizations of the twenty-first century: the election, at the end of 2025, of the young Muslim Zohran Mamdani as mayor of New York, on a platform centered on the intensely material fight for an affordable city; the Left Party’s victory in Berlin two weeks ago, built around the demand to expropriate private real-estate corporations; and the very recent wave of demonstrations in Spain—including an occupation of Madrid’s Puerta del Sol—in which tens of thousands of young people mobilized by the Tenants’ Union have demanded limits on rents. By putting itself in the straitjacket of the “fiscal framework” in the first months of 2022, Lula’s third government adopted the second fatal accommodation of its term. Faced with conservative institutions and a country devastated by four years of Bolsonaro, increased public investment was the government’s remaining weapon for offering a more dignified life to the majority and forging an anti-conservative pact with them. The same state that disburses 1 trillion reais a year to enrich a small class of rentiers could instead spend money to extend the Family Health Strategy to every Brazilian, at a cost of 30 billion reais; provide full-day public schooling and childcare to all adolescents and children—and, especially, relief to their mothers; achieve universal sanitation while cleaning up polluted urban rivers; multiply metro systems; begin transforming the urban peripheries; and undertake many other urgently needed projects. In April 2023, an article in Outras Palavras warned that the fiscal framework could “shrink the Lula government and preserve the forces that condemn the country to inequality and regression.” A year later, another article showed that restraints on public spending were strangling policies vital to ordinary people and undermining the president’s popularity. In November 2024 came a reality check, in the form of the government’s humiliating defeat in the municipal elections. Even then, the fiscal lock was neither removed nor loosened. On the contrary: throughout the government’s four years, fiscal restraint remained central to its political narrative. The administration proudly proclaimed that it had “put the state’s accounts in order,” without grasping either how misleading that phrase was—given the payment of 1 trillion reais in interest—or how badly the message was hurting it politically. Lula finally woke up in September 2026. The increase in Bolsa Família benefits, after four years of being frozen; the announcement that anti-obesity drugs would be offered through Brazil’s public health system; and the ban on online betting showed that the state has the power to act decisively on behalf of the majority when those in government are willing to confront obstacles. The huge marches that closed the campaign in Fortaleza, Salvador, Rio de Janeiro, and São Paulo on the eve of October 4 showed how such initiatives can mobilize activists and the broader public. But it was too late—and too little to change the outcome of the first round. History has not ended The possibility of a turnaround in the three weeks leading up to November 25 cannot be ruled out. It will not be simple or easy. Lula must not only make up a deficit of 2.2 million votes; he must also offset the movement of voters who backed other right-wing candidates in the first round, most of whom are likely to move toward Flávio Bolsonaro. Pulling that off will require a broad, grassroots effort to win over voters, potentially reinforced by new initiatives from Lula. The coming hours and days will be decisive. If Bolsonaro’s movement also wins the presidency, the result will create a high-risk situation for Brazilian sovereignty and democracy. The enormous challenges posed by such an outcome would require the left to reexamine, in depth and with a genuine willingness to engage in self-criticism, its political projects—or its lack of them—and its practices. But would that mean we are condemned to the long winter of far-right hegemony that some analyses are beginning to forecast? It is far too early to say, suggests a recent text by Álvaro García Linera, the thinker who served as vice president of Bolivia under Evo Morales. His central hypothesis is that this political current will prove short-lived. At a moment when the entire world is once again talking about sovereignty and protecting national economies, the far right offers a stale, recolonizing neoliberalism. Its submission to the United States is as blatant and pathetic as Flávio and Eduardo Bolsonaro’s overtures to Donald Trump. Its project amounts to something like every man for himself: greater inequality, capitalism without limits, devastation, and supremacism. Will it work? In the United States, just two years into his second term, Trump himself is reaching record levels of unpopularity and may be on the verge of losing Republican control of both the House and Senate in November. Every new beginning is difficult. Whatever the outcome of the second round, the defeats of October 4 show how profoundly the Brazilian left will have to rethink and rebuild. But just as it would be foolish to underestimate the seriousness of its mistakes, it would be equally foolish to conclude that rebuilding a political project is no longer possible. History has not ended. The times are moving faster than ever. Originally published in Portuguese by Outras Palavras. English translation by Eric Blanc; I’ve added the subtitles. More We can’t stop the far right at home or abroad without a revitalized labor movement, which is yet another reason why you should become a sustaining supporter of the Emergency Workplace Organizing Committee (EWOC) — one of US labor’s pivotal bright spots. Relatedly, Jacobin published a short piece of mine reflecting on a decade of Bernie Sanders inspiring a whole new generation of young worker organizers.
Almost all debt maturities move to 2031 and 2033 in AMC Entertainment (AMC)'s completed refinancing.
New notes carry 8.875% interest and second-lien loans 11.25%; remaining 2029 notes are to be redeemed on or about February 15, 2027.
Countries race to provide oral health care for all in 100-Day Sprint across Asia
Twenty Asian countries and areas across the WHO Western Pacific and South-East Asia regions vowed to strengthen essential oral health benefits as part of a “100-Day Sprint” initiative, during the 16th Asian Chief Dental Officers Meeting held from 27 to 29 September in Kota Kinabalu, Malaysia. The meeting marked the midpoint of the 100-day sprint bolstering support for countries to develop essential oral health benefit packages that can be integrated into national universal health coverage plans. Convened by the two WHO regional offices and the Malaysian Ministry of Health as the Secretariat, the meeting brought together national oral health leaders from 20 Asian countries, staff from all levels of WHO, WHO collaborating centres and other development partners. Participating countries and areas included: Bangladesh, Bhutan, Brunei Darussalam, Cambodia, China, Hong Kong (SAR) China, India, Indonesia, Japan, Lao People’s Democratic Republic, Malaysia, Maldives, Mongolia, Nepal, the Philippines, Singapore, Sri Lanka, Thailand, Timor-Leste and Viet Nam. Participants reviewed progress and refined proposals using the WHO Service Package Delivery and Implementation (SPDI) Platform. Countries conducted bottleneck analyses across four key areas: service delivery, workforce, access to essential medicines and health products, and health financing. They identified practical actions to address implementation challenges and refined proposed revisions to their national oral health benefit packages. “There is no health without oral health. Through the 100-Day Sprint, countries are advancing the implementation of the Western Pacific regional implementation plan on oral health and strengthening progress towards universal health coverage,” noted WHO Regional Director for the Western Pacific Dr Saia Ma'u Piukala. Participants identified bottlenecks and proposed workable solutions to strengthen access to essential oral health care through primary health care, sharing experiences and discussing how best to translate policy commitments into feasible and sustainable action at the country level. Malaysian Minister of Health Datuk Seri Dr Dzulkefly Ahmad highlighted the importance of prevention and primary health-care approaches to improve oral health: “Oral diseases can have lifelong consequences, yet many are preventable. By integrating essential oral health care into primary health care and promoting prevention in schools and communities, we can improve oral health across the life course.”The WHO team led by Dr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control of the WHO Western Pacific Region and national oral health leads from over 20 Asian countries visited the SK Pekan Putatan School, Sabah for school oral health programme including flouride mouth rinsing. © WHO / V. ChaudharyDr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control for the WHO Western Pacific Region, emphasized key collaborative roles WHO can play. “Oral diseases are the most common noncommunicable diseases, yet many can be prevented and treated through essential oral health services delivered at the primary health-care level,” she said. “By sharing experiences and using WHO tools such as the SPDI Platform, countries are accelerating progress towards universal health coverage for oral health.” “Integrating oral health into broader health services is essential for reducing inequities, expanding access and recognizing oral health as an integral component of overall health and well-being. The 100-Day Sprint provides an important opportunity to translate this commitment into practical action and ensure that quality oral health services reach all people, especially those most in need,” said Dr Suman Rijal, Director of the WHO South-East Asia regional Department of Healthier Populations and Noncommunicable Diseases. As host of the meeting, Malaysia showcased ongoing efforts to strengthen oral health care through primary health care and prevention-focused approaches, while providing a platform for countries across the two WHO regions to exchange experiences and accelerate progress towards universal health coverage for oral health. “WHO is encouraged by Malaysia's leadership in addressing the burden of oral diseases and advancing universal health coverage for oral health through practical, country-led action,” said Dr Rabi Abeyasinghe, WHO Representative to Malaysia, Brunei Darussalam and Singapore. Countries will continue to refine and figure costs for national oral health benefits during the remaining sessions of the 100 days. These efforts support implementation of the WHO Global strategy and action plan on oral health 2023–2030, while also helping to expand access to essential oral health services through stronger and more equitable health systems across the WHO Western Pacific and South-East Asia regions.______________For more information, or to arrange media interviews, contact: WHO Regional Office for the Western Pacific: wprocom@who.int WHO Regional Office for South-East Asia: SEMediaRelations@who.int
Chip City closes all locations amid economic challenges
Chip City, a New York City-based gourmet cookie chain, has closed all 22 remaining locations nationwide due to tough consumer spending and evolving preferences.
ESPN predicts Auburn's remaining schedule after SEC loss to Tennessee
How did Auburn football's 2026 outlook change following its Week 5 loss to Tennessee?
Countries race to provide oral health care for all in 100-Day Sprint across Asia
Twenty Asian countries and areas across the WHO Western Pacific and South-East Asia regions vowed to strengthen essential oral health benefits as part of a “100-Day Sprint” initiative, during the 16th Asian Chief Dental Officers Meeting held from 27 to 29 September in Kota Kinabalu, Malaysia. The meeting marked the midpoint of the 100-day sprint bolstering support for countries to develop essential oral health benefit packages that can be integrated into national universal health coverage plans. Convened by the two WHO regional offices and the Malaysian Ministry of Health as the Secretariat, the meeting brought together national oral health leaders from 20 Asian countries, staff from all levels of WHO, WHO collaborating centres and other development partners. Participating countries and areas included: Bangladesh, Bhutan, Brunei Darussalam, Cambodia, China, Hong Kong (SAR) China, India, Indonesia, Japan, Lao People’s Democratic Republic, Malaysia, Maldives, Mongolia, Nepal, the Philippines, Singapore, Sri Lanka, Thailand, Timor-Leste and Viet Nam. Participants reviewed progress and refined proposals using the WHO Service Package Delivery and Implementation (SPDI) Platform. Countries conducted bottleneck analyses across four key areas: service delivery, workforce, access to essential medicines and health products, and health financing. They identified practical actions to address implementation challenges and refined proposed revisions to their national oral health benefit packages. “There is no health without oral health. Through the 100-Day Sprint, countries are advancing the implementation of the Western Pacific regional implementation plan on oral health and strengthening progress towards universal health coverage,” noted WHO Regional Director for the Western Pacific Dr Saia Ma'u Piukala. Participants identified bottlenecks and proposed workable solutions to strengthen access to essential oral health care through primary health care, sharing experiences and discussing how best to translate policy commitments into feasible and sustainable action at the country level. Malaysian Minister of Health Datuk Seri Dr Dzulkefly Ahmad highlighted the importance of prevention and primary health-care approaches to improve oral health: “Oral diseases can have lifelong consequences, yet many are preventable. By integrating essential oral health care into primary health care and promoting prevention in schools and communities, we can improve oral health across the life course.”The WHO team led by Dr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control of the WHO Western Pacific Region and national oral health leads from over 20 Asian countries visited the SK Pekan Putatan School, Sabah for school oral health programme including flouride mouth rinsing. © WHO / V. ChaudharyDr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control for the WHO Western Pacific Region, emphasized key collaborative roles WHO can play. “Oral diseases are the most common noncommunicable diseases, yet many can be prevented and treated through essential oral health services delivered at the primary health-care level,” she said. “By sharing experiences and using WHO tools such as the SPDI Platform, countries are accelerating progress towards universal health coverage for oral health.” “Integrating oral health into broader health services is essential for reducing inequities, expanding access and recognizing oral health as an integral component of overall health and well-being. The 100-Day Sprint provides an important opportunity to translate this commitment into practical action and ensure that quality oral health services reach all people, especially those most in need,” said Dr Suman Rijal, Director of the WHO South-East Asia regional Department of Healthier Populations and Noncommunicable Diseases. As host of the meeting, Malaysia showcased ongoing efforts to strengthen oral health care through primary health care and prevention-focused approaches, while providing a platform for countries across the two WHO regions to exchange experiences and accelerate progress towards universal health coverage for oral health. “WHO is encouraged by Malaysia's leadership in addressing the burden of oral diseases and advancing universal health coverage for oral health through practical, country-led action,” said Dr Rabi Abeyasinghe, WHO Representative to Malaysia, Brunei Darussalam and Singapore. Countries will continue to refine and figure costs for national oral health benefits during the remaining sessions of the 100 days. These efforts support implementation of the WHO Global strategy and action plan on oral health 2023–2030, while also helping to expand access to essential oral health services through stronger and more equitable health systems across the WHO Western Pacific and South-East Asia regions.______________For more information, or to arrange media interviews, contact: WHO Regional Office for the Western Pacific: wprocom@who.int WHO Regional Office for South-East Asia: SEMediaRelations@who.int
'Dancing with the Stars' Week 5 theme revealed: It's Super Bowl Night
The Week 5 theme for "Dancing with the Stars" has been revealed. Here's what to know about Super Bowl Night and what viewers can expect from the remaining celebrity contestants.
NFL Week 4 TV coverage maps
There are 15 games remaining on the Week 4 NFL schedule. Here is when and where you can watch them.
Does Texas football play today? No. 1 Longhorns' remaining schedule
After going 4-0 to begin the season, top-ranked Texas football now awaits a matchup with bitter rival Oklahoma.
Theaster Gates bets on fine china
The famed, Chicago-based artist's career is taking a new direction with the purchase of Pickard China, the sole remaining maker of fine china in the United States.
Ranchester artist’s work now in all 50 states
Two weeks ago, Katie Coyne realized her online store hit a milestone — she had shipped orders to customers in 48 states. The only two remaining states were New Jersey and Rhode Island. Suddenly, she had a mission.
Will Brazil Betting Ban Change Flutter Entertainment's (FLUT) Narrative
Flutter Entertainment reported that Don Liu resigned as Chief Legal Officer effective September 30, 2026, with Group Company Secretary Edward Traynor stepping in as interim Chief Legal Officer from October 1, 2026. Brazil's recent ban on online betting removes a previously important market opportunity for Flutter Entertainment, placing greater emphasis on execution in existing regulated regions and any remaining expansion plans. We will now look at how Flutter Entertainment's investment...
Latvia vote shaped by Russia fears
Latvia's parliamentary election is being shaped by fears of Russian aggression and the war in Ukraine. While most parties back stronger defenses, they differ on whether remaining ties with Russia should be maintained.
Browns survive late comeback to defeat Steelers
Andre Szmyt kicks a match-winning 56-yard field goal with 10 seconds remaining as the Cleveland Browns survive a Pittsburgh Steelers comeback.
Nets GM Marks Remaining Flexible With Trade Assets
Armed with thirteen first-round picks and massive future cap space, Sean Marks is hunting for a blockbuster superstar deal while cultivating a high-upside young core in Brooklyn.
Rogers becomes sole owner of Maple Leaf Sports & Entertainment after purchasing remaining stake
TORONTO -- Rogers Communications Inc. has officially completed a full takeover of Maple Leaf Sports & Entertainment, which owns the Toronto Maple Leafs and Toronto Raptors, after purchasing the remaining 25 percent ownership stake from Kilmer Sports Inc. for $4.35 billion (Cdn) on Thursday.
Rogers becomes sole owner of Maple Leaf Sports & Entertainment after purchasing remaining stake
The telecommunications giant now has total control over the Maple Leafs, Raptors, Toronto FC, Argonauts and Scotiabank Arena.
Rogers becomes sole owner of Maple Leaf Sports & Entertainment after purchasing remaining stake
The telecommunications giant now has total control over the Maple Leafs, Raptors, Toronto FC, Argonauts and Scotiabank Arena.
Rogers Completes Acquisition of Maple Leaf Sports & Entertainment
Will invest to build championship-calibre teamsWill invest to deliver world-class experiences to fans and customersBecomes global communications, sports and entertainment leader TORONTO, Oct. 01, 2026 (GLOBE NEWSWIRE) -- Rogers Communications Inc. announced today that it has completed the acquisition of Maple Leaf Sports & Entertainment (MLSE), increasing its ownership of MLSE to 100%. Rogers acquired the remaining 25% ownership stake in MLSE from Kilmer Sports Inc. for C$4.35 billion. “We’re pr
Where UW Offensive Line Has Fallen Short
Quarterback Demond Williams Jr. has been pressured 58 times this season. In just four games, that number is the highest among quarterbacks in the Big Ten and tied for fifth-most nationally. Of the 58 pressures, 35 of them have been attributed to the offensive line, while the remaining 23 are credited to Williams himself. Washington …
Bears keeping starting QB under wraps before Jets game
Bears head coach Ben Johnson is remaining mum on the team's starting QB vs. the Jets, although the team knows "the direction" for Week 4.
Citrus County's oldest home starts season
The 1863 Duval-Metz House, the oldest remaining home in Citrus County, opens its 2026–27 season of house tours this month.
The Family Business Advantage: Third Quarterly Power Breakfast of 2026 explores how family businesses balance legacy and innovation
Photo by GFBJAnother successful Power Breakfast is in the books. The Greater Fayetteville Business Journal hosted its third quarterly Power Breakfast of 2026 on Tuesday, Sept. 29. Local leaders and decision-makers gathered to network and learn from the panel about how established principles drive long-term stability while allowing for operational evolution. The panel featured Managing Partner of Luigi’s Italian Chophouse & Bar, Nate Ernst; Inside Sales at Hubbard Supplyhouse, Mary Grace Hurley; Chief Operations Officer for Copiers Plus, Drew Smith; and CEO of Holmes Security Systems, Stephen Wheeler. The panel was moderated by Lauren Willets, director of the Family Enterprise Center at UNC’s Kenan-Flagler Business School. Throughout the discussion, the panelists returned to a common idea: family businesses thrive when they preserve the relationships and values at their core while remaining open to change.Each panelist shared personal stories that carried practical lessons. Stephen Wheeler emphasized the role of relationships with customers and employees, saying, “What makes a family business successful today is relationships.” Mary Grace Hurley echoed Wheeler’s sentiment, describing relationships as a lasting inheritance, including a customer connection that began when she was young and continued into her working life. “If something’s given to you, that’s going to cost you too,” added Nate Ernst. He explained this philosophy by sharing that, in his view, earning responsibility builds credibility and confidence.Another hot topic was the idea of tradition versus change. For these businesses that have been around for a century or even more, it can be difficult to escape the “we’ve always done it this way” caveat, but these speakers emphasized how change has been an integral part of their growth and longevity. A family business can honor its history without being bound by it.“Innovation and tradition–they don’t have to be competing with one another,” shared Hurley. She pointed to changes in how businesses operate, including the adoption of computers and new management practices. Ernst stressed that adaptation is essential, while Wheeler described how his family’s electrical contracting business had evolved into a security-focused company. The details of the work may change, but identifying and upholding core values is key to embracing change while maintaining the character of a business. “I think it’s just important to remember why you started in the first place. What was your mission? What are your core values? And to reevaluate those,” shared Drew Smith.In addition to the first-hand accounts and wisdom shared by panelists, Moderator Lauren Willets recommended two novels during the panel for those seeking additional educational resources. Those two novels are “Hug of War: How to Lead a Family Business with both Love and Logic”by Cathy Carroll and “In the Company of Family: How to Thrive When Business Is Personal” by Melissa Mitchell-Blitch. Preparing the next generation requires more than handing over a title or company. Wheeler argued that future leaders need genuine passion and a vested interest in the business. The panelists were in agreement that succession is a process, and there is not one clear answer for how to perfectly prepare for it. Leaders must cultivate readiness, keep communication open and make room for the next generation to earn responsibility while being sure not to neglect the business in the here and now. “Today’s Power Breakfast was one of our best events yet! Between the passion and in-depth knowledge of the panelists, the great audience questions and the guidance and expertise of Mrs. Willets, the conversation was both engaging and informative,” shared GFBJ Publisher Faith Hatton. “A lot of small businesses in Fayetteville are family-owned and grown, and it’s great to be able to spotlight some of the businesses that have stood the test of time by strengthening the next generation of leadership and preparing them for ownership. I hope everyone received some inspiration and ideas that they can bring back to their own businesses and organizations!”We thank everyone who attended this Power Breakfast and hope you’ll all join us for the next Power Breakfast on Dec. 8. Details about the event will be shared on our social media and in future email updates. To learn about becoming a Power Breakfast sponsor, contact the Greater Fayetteville Business Journal at 910.240.9697 or marketing@bizfayetteville.com.
Waséyabek prepares 100 acres for development at Holland industrial complex
BLDI and Priority Waste have filled the last remaining space in Waséyabek's Holland industrial property as surrounding land is prepared for development.
Lesbian Bar Project Co-Founder: Purity Politics Could Destroy Our Remaining Spaces
Subscribe As a professional lesbian and Massachusetts native, I’ve recently been asked by a lot of folks what I think about the saga unfolding at Last Ditch. The now-viral story, first reported by The Boston Globe, centers on a Western Massachusetts lesbian bar that lifted its mask requirement for one night a week to help drum up business. The decision ignited an intra-queer controversy that has been feasted on by media outlets across the political spectrum—from the New York Post to LGBTQ Nation—and is even reportedly being eyed for a Hollywood adaptation. Apparently nothing is more entertaining than a bunch of lesbians and queers fighting with each other over KN-95s. What has been lost in all of the chatter and media coverage is the very real possibility that Last Ditch, which just opened in April 2025, will have to close its doors. The venue’s one remaining founder, Jackie Matellian, revealed in a community Zoom meeting that she’s working four jobs, is now solely responsible for the bar’s $50,000 business loan and is struggling to keep up with the bills. So as we laugh about the controversy’s similarity to a “Portlandia” skit and how one of the bar’s founders left to enroll in clown school, we forget that yet another lesbian bar is facing an existential crisis—and this time the call is coming from inside the house. In 2020, my friend Elina Street and I created The Lesbian Bar Project, an Emmy-, Webby- and GLAAD Media Award-winning docuseries and initiative that tells the stories of lesbian queer bars around the world. We were moved to act because at the time there were only an estimated 16 lesbian bars in the United States, and the pandemic threatened to bring that number down even further. There are now more sapphic bars than there were just before the pandemic—about 36 of them in total—but this is down from approximately 200 in 1980. Maybe that doesn’t mean much to you, but for the millions of sapphics living in the U.S., this number is calamitous. As the world laughs at lesbians and sapphics, I want to take a second and tell you what I feel when I walk into one of these bars, which are all unique and irreplaceable in their own way: I feel seen. Sometimes I think Cubbyhole in New York City’s West Village neighborhood knew I was gay before I did. When I walked in there for the first time, before I was even out, I was transfixed by the colorful array of tchotchkes hanging from the ceiling and how the women standing next to me were completely unafraid to express their desire for one another. I knew the minute I was ready to come out, I had a home. I also felt the joy of a new couple falling in love at Seattle’s Wildrose, the quiet confidence of a short king lining up her shot at the pool table at Ginger’s in Brooklyn and the kick of cayenne pepper in Julie Mabry’s crawfish at Houston’s Pearl Bar. Subscribe Lesbian bars don’t just serve lesbians; they serve queer folks across the spectrum, including bisexual, pansexual and trans people. As Elina and I traveled across the U.S. and Europe and to parts of Latin America to document the bar owners, staff and patrons that make up the ecosystems of these spaces, we also became uniquely acquainted with the factors that threaten their existence: gentrification, wage gaps, sexism, environmental disasters, gun violence, rising insurance premiums and political administrations working to annihilate queer people and their families. Lesbian bar owners, like all leaders and entrepreneurs, are imperfect. There have been significant issues over the years at lesbian bars: employee harassment, racism, lack of accessibility, sexual assault and transphobia. All bar owners should be held accountable and should listen to their communities to evolve into safer and more equitable spaces. I also acknowledge my privilege: I am able-bodied, white, cis and from a family system that loves me for who I am. Not everyone has that. Queer people, especially trans and bisexual people, are suffering from disproportionately high levels of depression, and our mental health system isn’t equipped to support them. Immunocompromised people and long COVID are real, and many of my friends are suffering to this day. The people with the least safety net are often the ones for whom a bar closing costs the most. And yet, as we’re seeing with Last Ditch, the queer community often lashes out at each other. It’s also the mainstream media taking the internal conflict and making a mockery out of it, distracting from the real possibility that this bar could close due to financial pressures. A bar that many people loved and needed is facing extinction. Perhaps it’s safer to dissent with one another than with the larger forces trying to eradicate us, but in doing so, we risk destroying the few spaces we have left. Due to the constraints of purity politics—some in good faith, some not so much—lesbian bar owners, almost all of whom are queer women themselves, are forced to be everything for everyone, similarly to how women are forced to be everything for everyone. By asking these bars to uphold impossible standards—standards very few other third spaces are asked to consider—we all end up losing. I want to move as a community toward dialogue, compassionate dissent and collaboration to make our spaces better with the goal of keeping them OPEN and thriving, rather than destroying them from the inside with expectations that are arguably unattainable. Subscribe While I have your attention—for this fleeting second of the news cycle—may I urge us to spearhead a way to keep these small businesses afloat without attacking our own community along the way? Bar owners are left with an impasse: They want to be community-centered, but they also have to make money to keep their doors open. Sometimes they might make business decisions that don’t work for everyone—and that’s partly because different patrons have different priorities and want different things—but these owners deserve the opportunity for productive dialogue**.** We have to work with them and with each other to keep our spaces open, to keep them growing. Lesbian bars raised me into the queer woman I am today. One thing I think about as I reflect on the six years of work we’ve done to document these spaces is that shared, unspoken language I have with a stranger the moment we both walk into one of these bars: the nod, the ease, the not having to explain ourselves. I don’t want to lose that, and neither should you. If objective, nonpartisan, rigorous, LGBTQ-focused journalism is important to you, please consider making a tax-deductible donation through our 501(c)(3) fiscal sponsor, Resource Impact, by clicking this button: Donate
Ranking Texas A&M's 8 remaining opponents from easiest to toughest
Texas A&M has eight games left after back-to-back SEC losses. Here is how the Aggies’ remaining opponents rank from easiest to toughest.
Draymond Green Says Luka Doncic & Lakers Hurt LeBron James
The Los Angeles Lakers are still forced to witness the loss of LeBron James remaining a huge talking point. Any NBA team losing an iconic figure will see this level of attention, and it is far bigger than the Lakers. Draymond Green decided to bring this back into the news by addressing something head coach […] The post Draymond Green Says Luka Doncic & Lakers Hurt LeBron James appeared first on HEAVY.
Scientists Pinpoint a Possible “Sweet Spot” for Life’s Origins 4.33 Billion Years Ago
By simulating a billion years of Earth’s history, researchers have identified a possible window for life’s earliest chemistry around 4.33 billion years ago. During its first few hundred million years, Earth was a hostile target. Asteroids, comets, and leftover planetesimals, smaller bodies remaining from planet formation, relentlessly battered the planet, generating intense heat that could
As Rochester builds Destination Medical Center, some businesses say they're falling off the map
The construction of Rochester’s new rapid bus transit line is taking a toll on many businesses. Some have closed, and many of the remaining shops and restaurants say they are just barely hanging on.
NFL Week 3 TV coverage maps
There are 15 games remaining on the NFL schedule in Week 3. Where and when will they air?
Phoenix Rising lacks energy in pivotal loss to Oakland
With just four games remaining on the USL Championship schedule and still sitting outside the playoff places, Phoenix Rising lost 3-0 on the road to Oakland Roots. It could have...
Injured Isak returns to Liverpool from Sweden duty
Liverpool striker Alexander Isak has returned to his club after picking up a minor injury while on international duty with Sweden. The 27-year-old will not be involved in Sweden's remaining three matches in this international break and will be assessed by his club's medical staff. Isak has started the season with four goals in five Premier League games for the Reds.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Microsoft CEO says ‘streamlining’ of Xbox business is ‘great to see’
Executive says he’s feeling good about Xbox’s remaining studios and IPs…
As Resident Evil Requiem Passes $500m Revenue, Analysis Shows 8.6% Sales Were on Xbox, With Remaining 91% Shared Between PS5 and Steam
Resident Evil Requiem sold just 8.6% of its copies on Xbox, new sales analysis indicates.
Demolition Proposed for Portions of the Business Block Ruins - Palisadian-Post
After months of an uneasy status quo with the stark remains of the historic but devastated Business Block building, Los Angeles City Councilwoman Traci Park’s office is attempting to move forward with a plan to demolish and clear half the still-standing walls, while preserving the remaining portions to be incorporated in the site’s eventual redevelopment.… Keep reading
Who on Earth Could Start Game 162 for the Astros?
There are three games remaining in the 2026 regular season, and somehow the Astros control their own destiny in the American League West. The Astros have won two of three games this week despite not having a starting pitcher complete three innings. Hunter Brown will start Friday’s game in West Sacramento, with Hayden Wesneski likely […]
'Big Brother 28' spoilers: See which houseguests made the final 3
"Big Brother" summer is almost over, and one of the three remaining houseguests is about to become $750,000 richer.
Cubs’ Final Series Might Be Forced To New Location
The magic number for the Chicago Cubs to clinch their spot in the 2026 MLB postseason is one, as they need either just one more victory or a loss by the Arizona Diamondbacks. The Cubs, who are playing their series finale against the Miami Marlins, have one more series remaining on the road against the […] The post Cubs’ Final Series Might Be Forced To New Location appeared first on HEAVY.
Jude Bellingham set for lucrative new Real Madrid contract
Jude Bellingham is next in line for a lucrative contract renewal at Real Madrid despite having almost three years remaining on his current deal.The England international joined Real Madrid from Boruss...
Phillies playoff tracker: Wild Card race, clinching scenarios and seeding
Track the Phillies’ path to another Red October, including their magic number, Wild Card standings, remaining schedule and potential playoff matchups
AL West Race Comes Down to the Wire!
The American League West is turning into one of baseball’s most dramatic division races, and it could come down to the final game of the regular season. The Houston Astros and Texas Rangers are tied at 78-79 with just five games remaining. Houston currently holds the tiebreaker after winning the season series against Texas, giving…
San Francisco Giants Make Marcelo Mayer Move During Twins Series
The San Francisco Giants certainly have not had the season they’d hoped for by any stretch.They’re coming off a 3-2 loss against the Minnesota Twins on Tuesday night and sit at 65-93 overall with just five games remaining in the regular season.And while these games don’t count for anything and it’s likely most in San […] The post San Francisco Giants Make Marcelo Mayer Move During Twins Series appeared first on HEAVY.
Who went home on 'DWTS' Week 2?
Dancing with the Stars continued on its journey to find the next Len Goodman Mirrorball champ this week with the remaining 14 couples all performing to viral hit songs. It was a night filled with tangos, some salsa and a breakout performance from Olympians Amber Glenn and Ezra Frech.
How can the Diamondbacks still make the 2026 MLB postseason?
PHOENIX – With six games remaining, the Diamondbacks are still alive in the NL Wild Card race, but barely. Arizona sits four games behind Philadelphia for the third National League Wild Card spot.
Governor Evers points to K-12 funding as unfinished business as tenure winds down
WISCONSIN DELLS, Wis. -- With only months remaining in his tenure, Governor Tony Evers says increasing support for Wisconsin's public schools is one area
Ranking Texas A&M's 9 remaining opponents from easiest to toughest
Alabama moved ahead of LSU, while Oklahoma and South Carolina slipped in the latest ranking of Texas A&M’s remaining opponents.
Brentford's remaining players given week off
Most squads in the Premier League these days are packed with international players, and Brentford are no different. Most of the Bees' squad are away, but Callum Wilson and Igor Thiago are among about 12 players left at their training facility, including five who are coming back from injury. Brentford have a longer break than almost every other team, given they hosted Chelsea on Friday.
Los Angeles Dodgers Make 4 Sudden Roster Moves
The Los Angeles Dodgers have enjoyed another successful season in MLB. They are 96-60, and have the second-best record in the sport, and have already clinched the NL West for the 13th time in the past 14 seasons. There are just two series remaining on the schedule for the Dodgers: a three-game set with the […] The post Los Angeles Dodgers Make 4 Sudden Roster Moves appeared first on HEAVY.
One Week Remaining: Where the Postseason Race Stands
We are almost there, 155-156 games in the history books, "six-seven" to go in the marathon that is the Major League Baseball Season. But plenty is still up for grabs in the MLB postseason race. All three National League divisions are officially clinched by the 98-58 Milwaukee Brewers, 96-60 Los Angeles Dodgers, and the 92-64 …
Eagles Steal Victory From Titans With Last-Second Touchdown
The Philadelphia Eagles found a way to escape Nashville with a victory Sunday, rallying late to defeat the Tennessee Titans 24-20 and improve to 2-0 on the season. Philadelphia looked to be in trouble late after Tennessee took a 20-17 lead on a 33-yard field goal with just 1:56 remaining. The Eagles needed to go…
Packers Rally to Stun Jets in Overtime
The Green Bay Packers pulled off a dramatic comeback Sunday afternoon, rallying from a 10-point fourth-quarter deficit to defeat the New York Jets 20-17 in overtime at MetLife Stadium. The Jets appeared to be in control for much of the afternoon and held a 17-7 lead with just over 11 minutes remaining in the fourth…
The Data Behind Everton vs Ipswich: Positives To Take
Everton secured 1-0 victory over Ipswich Town in the Premier League on Saturday, remaining unbeaten heading into the international break.
What went right for the Cardinals in 2026?
The finishing touches are being put on to the St. Louis Cardinals season and despite another season missing the playoffs, the overall year has to be seen as a success. With the season being a fact-finding mission for the roster, there are very few remaining questions on the big league squad while the minor league […]
Sunday football open thread
It’s the last Premier League football for three weeks, as the new, ridiculous super-international break starts tomorrow. However, there’s plenty of woso to come, with Spurs Women playing FIVE MATCHES before the men play another game. That said, we might as well have an open thread for the remaining Premier League matches today in addition […]
Angels 6, Twins 5: Mostly Dead
The Twins made their remaining loyal contingent suffer through a blown lead and another loss in extra frames, as the Angels took the third game of the series. Walker Jenkins continued his tear, leading off the third inning with a single. This would enable Luke Keaschall to bring him home on a one-out double; Keaschall […]
Game 155: Twins at Angels
First Pitch: 8:38 pm CDTTV: Twins.TVRadio: TIBN / WCCO 830 / The Wolf 102.9 FM / Audacy The kids have been showing out a bit in Anaheim, providing one of the only remaining reasons to watch 2026 Twins baseball as this underwhelming season has normalized itself to fall back in line with preseason projections. Now, […]
Bueckers, Wings handle business vs. Mercury to mark end of an era at College Park Center
ARLINGTON, Texas - The Dallas Wings have two more regular-season games remaining and a playoff run a...
Paige Bueckers, Wings handle business vs. Mercury to mark end of an era at College Park Center
ARLINGTON, Texas — The Dallas Wings have two more regular-season games remaining and a playoff run ahead, but Saturday afternoon at College Park Center marked the end of an era.
Indiana Fever schedule: When does Caitlin Clark play again?
With just three games remaining in their 2026 regular-season slate, when do Caitlin Clark and the Indiana Fever play next?
Predicting the Broncos' 16 remaining games and final record
Will the Broncos win enough games to make the NFL playoffs this season? Here's our prediction.
Ibrahim Mbaye has given Unai Emery a Tottenham selection dilemma
Ibrahim Mbaye strengthened his case for a Premier League start against Coventry and Dan Bardell believes the teenager has done enough to claim one of the two remaining places alongside John McGinn behind Nicolas Jackson as Unai Emery considers his attacking options for Tottenham.
Mavericks Get Middling ESPN Future Ranking Despite Cooper Flagg
The Dallas Mavericks landed 17th in ESPN's NBA Future Power Rankings, with Cooper Flagg providing optimism but questions remaining around the roster.
Louisiana prepares to pay more to its remaining private Medicaid plans
The Louisiana Department of Health has proposed new, larger contract extensions for the four health insurance companies that will remain a part of the Medicaid program. The deals were shared with state lawmakers Thursday and will follow the exit of two private companies that are leaving the state — and up to 580,000 enrollees — by the end of the year.
16th Asian Chief Dental Officers Meeting: Advancing universal health coverage for oral health in the WHO Western Pacific and South-East Asia Regions
Session 3 of the 100-Day Sprint BackgroundOral diseases remain among the most prevalent noncommunicable diseases (NCDs) across Asia, affecting people throughout the life course and placing a significant burden on individuals, families and health systems. Countries across the World Health Organization (WHO) Western Pacific Region and South-East Asia Region have committed to strengthening oral health through regional action plans and by advancing universal health coverage (UHC). The 16th Asian Chief Dental Officers Meeting (ACDOM) serves as a regional platform for Chief Dental Officers in Asia to exchange experiences, strengthen collaboration and accelerate implementation of oral health commitments. For the first time, the meeting is being jointly organized by the WHO Regional Offices for South-East Asia and for the Western Pacific and the ACDOM Secretariat. This year's meeting introduces a 100-Day Sprint, bringing together oral health and UHC leads and technical experts to support countries in strengthening integration of oral health within national UHC benefit packages. Through the Sprint, participating countries will develop, refine, cost and operationalize country-specific essential oral health-care benefit packages using WHO tools, including the Service Package Delivery and Implementation (SPDI) Platform. The in-person 16th Asian Chief Dental Officers Meeting represents Session 3 and the midpoint of the 100-Day Sprint, providing an opportunity for countries to review progress, exchange experiences, identify challenges and refine their approaches before continuing with the remaining Sprint sessions. 100-Day SprintSession Date Format Title Session 1 (Day 0) 19 Aug Virtual Setting the Scene and Introducing Key Principles and Frameworks Session 2 16 SepVirtual Introduction to the SPDI Platform and Initial Mapping Exercise Session 3 27-29 Sep In-person, 16th Asian Chief Dental Officer Meeting, Malaysia Review and Refinement of Oral Health Service Packages Session 4 14 Oct Virtual Finalizing National Essential Oral Health Services Packages and Costing Exercise Session 5 (Day 100) 26 Nov Virtual Country Presentations and Closing of the 100-Day Sprint ObjectivesLeverage the 100-Day Sprint to define priority implementation actions for oral health in countries; Strengthen national capacity to design, cost and operationalize country-specific essential oral health care packages using SPDI platform; andExplore cross-country collaboration to expand access to essential oral health supplies and products, including harmonized specifications and pricing, and improve supply chains for essential dental preparations and medicines.Expected outcomesA draft country-specific essential oral health care benefit package developed using the SPDI platform and aligned with WHO’s Essential Oral Health Care packageA strengthened regional network in Asia of oral health and UHC leaders, fostering collaboration among South-East Asia and Western Pacific countries, WHO offices and WHO Collaborating Centres to support sustained implementation beyond the meetingParticipantsChief Dental Officers and national oral health programme leads;National focal points responsible for universal health coverage, health financing and health systems;Representatives from WHO country offices, regional offices and headquarters;WHO Collaborating Centres; andAcademic institutions and technical partners.